JOYHILL 012

조이힐 5갤런 생수병 디스펜서 사용 설명서

모델: 012

소개

구매해주셔서 감사합니다asing the JOYHILL 5 Gallon Water Bottle Dispenser. This portable and convenient water pump is designed for easy access to drinking water from 3 and 5-gallon bottles, suitable for home, kitchen, office, and outdoor activities like camp주고받음.

제품 구성 요소

The JOYHILL Water Bottle Dispenser typically includes the following components:

JOYHILL Water Bottle Dispenser with a hand pressing the button, dispensing water into a glass.

Image: The JOYHILL water bottle dispenser attached to a large water bottle, with water flowing into a glass. A hand is shown pressing the power button on top of the dispenser.

설치 지침

  1. 배수관을 설치하십시오: Insert the stainless steel outlet pipe into the designated hole on the top of the pump unit. Ensure it is firmly in place.

    Step 1: Installing the outlet pipe into the pump unit.

    Image: A person's hands installing the curved stainless steel spout into the main pump unit.

  2. Attach the Silicone Hose: Connect the food-grade silicone hose to the bottom inlet of the pump unit. Make sure it is securely attached to prevent leaks.

    Step 2: Attaching the silicone hose to the bottom of the pump unit.

    Image: A person's hands attaching the clear silicone hose to the underside of the pump unit.

  3. Place on Water Bottle: Insert the silicone hose into your 3 or 5-gallon water bottle. Place the pump unit securely on top of the bottle's neck. Ensure the pump fits snugly over the bottle opening (suitable for 2.16-inch / 5.5 cm neck diameter). For 5-gallon bottles, preparing a bottle cap can help ensure stability.

    Step 3: Placing the pump unit onto a water bottle.

    Image: A person placing the assembled water pump onto the neck of a large water bottle.

작동 지침

  1. 전원 켜기/끄기: Press the power button on the top of the dispenser to start or stop water flow. The pump features a one-switch operation for ease of use.

    Operating the JOYHILL Water Bottle Dispenser by pressing the button.

    Image: A hand pressing the illuminated button on top of the water dispenser, indicating operation.

  2. 자동 차단 : The pump will automatically stop pumping water after 60 seconds to prevent wastage. This feature ensures efficient water dispensing.

  3. 충전 중: When the battery is low, connect the supplied micro USB cable to the charging port on the pump and to a standard USB power adapter (not included). A red light indicates charging, and the light will turn off when fully charged. Avoid using fast chargers to prevent damage.

    JOYHILL Water Bottle Dispenser showing USB charging and battery indicator lights.

    Image: An illustration showing the pump's 1200mAh battery, USB charging port, and indicator lights for working (blue), charging (red), and full charge (light off).

제품 데모 영상:

Video: A demonstration of the JOYHILL water dispenser in use, showing how it dispenses water from a large bottle into a cup. This video highlights the ease of operation and water flow.

유지

To ensure the longevity and hygiene of your water dispenser, follow these maintenance tips:

문제 해결

문제가능한 원인해결책
No water dispensed / Weak flowLow battery; Silicone hose kinked or blocked; Pump not securely attached to bottle.Charge the pump; Check and straighten the hose; Re-secure the pump on the bottle.
누출Improper installation of spout or hose; Damaged silicone seal.

Ensure all connections (spout, hose) are tight and properly seated. If the issue persists, check the food-grade silicone seal inside the spout connection point. Reassemble the seal if it's dislodged.

Troubleshooting: Removing the stainless steel pipe to check for leaks.

Image: Step 1 of leak troubleshooting, showing how to grasp and remove the stainless steel pipe.

Troubleshooting: Examining the food-grade silicone and ABS components for leaks.

Image: Step 2 of leak troubleshooting, showing the separated food-grade silicone and ABS components.

Troubleshooting: Separating the food-grade silica gel from ABS.

Image: Step 3 of leak troubleshooting, demonstrating how to separate the food-grade silica gel from the ABS part.

Troubleshooting: Reassembling the food-grade adhesive and waterproof sleeve.

Image: Step 4 of leak troubleshooting, showing the reassembly of the food-grade adhesive into the ABS and resetting the waterproof sleeve.

펌프가 충전되지 않음Faulty cable; Incompatible charger; Charging port damage.Try a different micro USB cable; Ensure charger output is compatible (1.2A to 2A recommended); Contact support if port is damaged.

명세서

특징세부 사항
상표조이힐
모델 번호012
색상검은색
재료스테인레스 스틸, 아크릴로니트릴 부타디엔 스티렌(ABS)
용량 호환성3 & 5 Gallon Water Bottles (2.16-inch / 5.5 cm neck diameter)
제품 치수2.9인치 깊이 x 2.9인치 너비 x 5.1인치 높이
무게8.5 온스
왓tage4 와트
전원Battery Powered, Corded Electric (via Micro USB)
배터리리튬 이온 배터리 1개 필요 (내장형 1200mAh)
자동 종료예(60초 후)

보증 및 지원

For any installation or quality issues within 120 days of purchase, please inform us. We are committed to providing satisfactory solutions.

For further assistance, please visit the official JOYHILL Store on Amazon: JOYHILL Amazon Store.

더 자세한 정보는 공식 사용자 가이드(PDF)를 참조하십시오. 사용 설명서 (PDF).

관련 문서 - 012

사전view JOYHILL 디지털 타이머 사용 설명서
JOYHILL 디지털 타이머 사용에 대한 포괄적인 가이드로, 설정, 카운트다운 설정, 타이밍 기능, 에너지 절약 모드, 문제 해결 등을 다룹니다.
사전view 조이힐 전자 커피 저울 사용 설명서
이 문서에는 Joyhill 전자 커피 저울의 사용 설명서가 포함되어 있습니다. 제품 레이아웃, 버튼 기능, 계량, 수동 및 자동 타이밍 모드를 사용한 커피 추출 방법 등이 포함되어 있습니다. 또한 사용 및 관리에 대한 경고 및 조언도 포함되어 있습니다.
사전view Malmbergs Evon Pro WiFi/Bluetooth/4G EV 충전소 설치 및 사용 설명서
Malmbergs Evon Pro WiFi/Bluetooth/4G EV 충전소에 대한 종합 안내서로, 안전, 설치, 기술 사양, 작동 및 문제 해결 방법을 다룹니다. 이 설명서는 상업적 용도로 사용하기 위한 자세한 지침을 제공합니다.
사전view 베로보드 2인치 미니 LED IC 등급 매립형 다운라이트 - 사양 및 성능
베로보드 2인치 미니 LED IC 등급 매립형 다운라이트의 상세 사양, 안전 정보 및 조도 측정 보고서입니다. CRI, CCT, 루멘 출력, 빔 각도 및 권장 전원 공급 장치가 포함되어 있습니다.
사전view MALMBERGS Evon PRO WiFi/Bluetooth/4G EV Charging Station User Manual
Detailed user manual for the MALMBERGS Evon PRO WiFi/Bluetooth/4G electric vehicle charging station, covering installation, technical specifications, safety guidelines, network configuration, and troubleshooting.
사전view Multifunctional Bottle Brush Set Operation Instructions
Operation instructions for the Multifunctional Bottle Brush Set (JBB-012), detailing features like UV disinfection, material specifications, usage guidelines, and safety precautions for hygienic cleaning of baby bottles and accessories.