EPEVER 60A MPPT 태양광 충전 컨트롤러 사용 설명서

1. 서론

This manual provides instructions for the installation, operation, and maintenance of the EPEVER 60A MPPT Solar Charge Controller (Model 6415AN). This controller is designed for 12V/24V/36V/48V auto-sensing systems, features common negative grounding, and supports a maximum PV input of 150V and 4500W. It is compatible with various battery types, including lead-acid (sealed, gel, flooded) and lithium batteries.

Figure 1: EPEVER 60A MPPT Solar Charge Controller (Model 6415AN) showing front and back views with terminals.

2. 안전 지침

• Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller or batteries.
• 항상 배터리를 먼저 연결하고, 그 다음 태양광 패널을 연결한 후, 마지막으로 부하를 연결하세요. 분리는 역순으로 하세요.
• 컨트롤러는 통풍이 잘 되는 곳에 설치하고, 가연성 물질과 직사광선을 피하세요.
• Use appropriate circuit breakers or fuses for all connections to protect against overcurrent.
• The controller is common negative ground. Ensure proper grounding for safety.

3. 제품 오버view

The EPEVER Tracer AN series controller utilizes multiphase synchronous rectification technology (MSRT) and an advanced MPPT control algorithm. It features a dual-core processor architecture and common negative design, offering high response speed, reliability, and industrial standard performance.

그림 2: 상세 view of the EPEVER 60A MPPT Solar Charge Controller with key components labeled, including terminals, buttons, and indicators.

1. 퓨즈: 배터리 회로용 과전류 보호 장치.
2. 배터리 단자: 배터리 뱅크에 연결합니다.
3. PV 터미널: 태양광 패널 어레이에 연결됩니다.
4. Load Control Relay: Output for controlling external loads.
5. RBVS 포트: 원격 배터리 볼륨tage 센서 포트.
6. Utility/Generator Relay ON: Relay for utility or generator control.
7. Utility/Generator Relay OFF: Relay for utility or generator control.
8. RS485 Port (5V/DC/200mA): Communication port for PC or remote meter.
9. RTS 포트: 원격 온도 센서 포트.
10. Generator and Load Relay Enable: Terminal for enabling generator and load relays.
11. PV Reverse Polarity Alarm Indicator: LED indicator for incorrect PV polarity.
12. 접지 단자: 시스템 접지용입니다.
13. 선택 버튼: Used for navigating menus and changing settings.
14. 충전 LED 표시기: 충전 상태를 나타냅니다.
15. Fault LED Indicator: 시스템 오류를 나타냅니다.
16. 입력 버튼: Used for confirming selections and entering menus.

4. 설정 및 설치

4.1 배선도

그림 3: 예ample connection diagram illustrating the wiring of the solar charge controller with PV array, battery bank, and load. Consult local and national electrical codes for compliance.

4.2 설치 단계

1. 설치: Mount the controller vertically on a non-flammable surface in a well-ventilated area, ensuring adequate clearance for heat dissipation.
2. 접지: Connect the grounding terminal to earth ground. The controller features common negative grounding.
3. 배터리 연결: Connect the battery cables to the battery terminals on the controller. Ensure correct polarity (positive to positive, negative to negative). The PV input voltag전압은 배터리 전압보다 최소 2V 이상 높아야 합니다.tag충전을 시작하려면 e를 누르세요.
4. PV 어레이 연결: Connect the solar panel cables to the PV terminals. Verify correct polarity. The maximum PV open circuit voltage는 150V를 초과해서는 안됩니다.
5. 부하 연결: Connect the load to the load control relay terminals.
6. 선택 사양: Connect the Remote Temperature Sensor (RTS) to the RTS Port and the Remote Battery Voltage Sensor (RBVS) to the RBVS Port for accurate temperature compensation and voltag측정.
7. 전원 켜기: After all connections are secure and verified, the controller will power on automatically.

5. 사용 설명서

5.1 LCD Display and Interface

Figure 4: The LCD display shows various system parameters such as PV voltage, 충전 전류, 배터리 용량tage, load status, and energy statistics. The browse interface illustrates different screens accessible via the SELECT and ENTER buttons.

The LCD provides real-time system information. Use the 선택하다 button to navigate through different display screens and the 입력하다 button to confirm selections or enter settings menus.

5.2 배터리 유형 설정

The controller supports various battery types. It is crucial to set the correct battery type for optimal charging and battery longevity. The supported types include:

• 봉인됨(기본값)
• 젤라틴
• 침수됨
• 리튬
• User-defined (for custom parameters)

Access the battery type settings through the controller's menu using the SELECT and ENTER buttons or via the RS485 communication port with appropriate software/remote meter.

5.3 통신 인터페이스

The controller features an RS-485 communication bus interface and supports the Modbus communication protocol. This allows for connection to a PC or a remote meter (e.g., MT50) for advanced monitoring, parameter setting, and data logging.

6. 유지관리

정기적인 유지관리를 통해 태양광 충전 컨트롤러의 수명과 최적의 성능을 보장할 수 있습니다.

• 시각적 검사: Periodically check all wiring connections for tightness and corrosion. Ensure no insulation damage.
• 청소: Keep the controller's heat sink and enclosure clean and free from dust or debris to ensure proper heat dissipation. Use a dry cloth for cleaning.
• 통풍: Ensure the installation area remains well-ventilated and free from obstructions that could impede airflow.
• 배터리 상태: 배터리 용량 모니터링tage and health regularly. Ensure battery terminals are clean and free of corrosion.

7. 문제 해결

The controller includes a fault LED indicator to signal issues. Refer to the following common troubleshooting steps:

• 디스플레이 없음/전원 없음:
  • 배터리 연결 상태를 확인하고 단단히 고정되어 있고 극성이 올바른지 확인하십시오.
  • 배터리 용량 확인tage는 작동 범위 내에 있습니다.
  • 배터리 퓨즈를 확인하세요.
• 태양광 발전으로 충전 불가:
  • Check PV array connections and polarity. The PV reverse polarity alarm indicator will light up if polarity is incorrect.
  • PV 입력 볼륨 확인tage는 배터리 전압보다 최소 2V 이상 높습니다.tage.
  • Verify solar panels are receiving adequate sunlight and are not shaded.
• 로드가 작동하지 않음:
  • 하중 연결부를 점검하고 안전한지 확인하세요.
  • Verify load settings in the controller menu.
  • 배터리 용량 확인tage is sufficient to power the load.
• Fault LED Indicator On:
  • Consult the detailed fault codes in the complete product manual (not provided here) for specific error identification. Common faults include over-voltage, 언더볼륨tag예를 들어 과열 또는 단락 등이 있습니다.

8. 사양

Figure 5: Dimensions of the EPEVER 60A MPPT Solar Charge Controller: Length 340mm, Width 236mm, Height 119mm.

Figure 6: Detailed technical specifications for the EPEVER Tracer AN Series, including the 6415AN model.

9. 보증 정보

The EPEVER 60A MPPT Solar Charge Controller (Model 6415AN) comes with a manufacturer's warranty for 2 years from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

10. 지원

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact EPEVER customer support. Refer to the official EPEVER website for the most up-to-date contact information and additional resources, including detailed manuals and software downloads.