소개
Thank you for choosing the Mesqool Ultra-Clear Digital Alarm Clock. This device combines a large LED display with a unique time projection feature, dual alarms, and a convenient USB charging port, designed to enhance your daily routine. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your new alarm clock.
The Mesqool Ultra-Clear Digital Alarm Clock, featuring its large display, time projection, and USB charging capability.
설정
- 짐 풀기: Carefully remove all components from the packaging. Ensure you have the alarm clock unit and the AC power adapter.
- 전원 연결:
Connect the provided AC power adapter to the DC IN port on the back of the alarm clock. Plug the adapter into a standard wall outlet. The display will light up.
- 배터리 백업 설치:
For battery backup, open the battery compartment on the bottom of the unit. Insert two (2) AAA batteries (not included), observing the correct polarity (+/-). These batteries will preserve your time and alarm settings during a power outage and can trigger the alarm, but will not power the display.
Insert two AAA batteries into the designated compartment for backup functionality.
- 초기 시간 설정:
Upon first power-up, the clock may display a default time. Refer to the "Setting Time" section under Operating Instructions to set the current time.
작동 지침
Setting Time (12/24H Format)
- 를 누르고 계세요 "SET TIME" 시 숫자가 깜빡일 때까지 버튼을 누르세요.
- 사용하세요 "시간" 그리고 "분" 버튼으로 시간을 조정합니다.
- 누르다 "SET TIME" 다시 한번 확인하고 다음 설정으로 넘어가세요.
- 12시간 형식과 24시간 형식을 전환하려면 다음을 누릅니다. "12/24H" button during time setting or normal operation.
이중 알람 설정
The clock features two independent alarms (ALARM1 and ALARM2).
- 두 가지 중 하나를 길게 누르세요 "ALARM1" or "ALARM2" 알람 시간 숫자가 깜빡일 때까지 버튼을 누르세요.
- 사용하세요 "시간" 그리고 "분" 원하는 알람 시간을 설정하려면 버튼을 누르세요.
- 해당 알람 버튼을 다시 눌러 확인하십시오.
- 알람을 활성화/비활성화하려면 버튼을 짧게 누르십시오. "ALARM1" or "ALARM2" button. An indicator icon will appear/disappear on the display.
- 알람 볼륨 조절: During an active alarm, press the "VOL-" or "VOL+" buttons to adjust the alarm volume. There are multiple levels of volume adjustment.
The alarm volume can be adjusted to your preferred level, from quiet to loud.
스누즈 기능
알람이 울리면 큰 버튼을 누르세요 "SNOOZE/OK" button on top of the clock to temporarily silence the alarm for 9 minutes. The alarm will sound again after the snooze period.
Activate the 9-minute snooze function by pressing the large SNOOZE/OK button.
Time Projection Features
The Mesqool alarm clock can project the time onto your wall or ceiling.
- 투영 각도: The projector lens can be rotated 180 degrees to adjust the projection angle.
- 초점 조정: Rotate the focus ring on the projector to achieve a clear and sharp projection image.
- Projection Reversal: If the projected time appears upside down, press the "FLIP" button (or similar, refer to specific button on your model) to reverse the projection 180 degrees.
- 투사 밝기: The projection brightness can be adjusted. Locate the "PROJECTION DIMMER" switch or button on the side of the projector. There are 5 levels of brightness.
Adjust the projection angle, focus, and flip the image for optimal view주고받음.
Select from 5 levels of projection brightness to suit your environment.
The projection dimmer switch is located on the side of the projector.
디스플레이 디머
The main LED display has 5 levels of brightness. Press the "주차" button (or similar, refer to specific button on your model) repeatedly to cycle through the brightness levels, from brightest to off.
The large LED display offers clear visibility and adjustable brightness.
USB 충전 포트
A USB charging port is located on the back of the unit. Connect your smartphone or other USB-powered devices to this port for convenient charging. This port is for charging only and does not support data transfer.
Utilize the integrated USB port to conveniently charge your devices.
일광 절약 시간 (DST)
를 누르세요 "DST" button to activate or deactivate Daylight Saving Time. The clock will automatically adjust by one hour forward or backward.
유지
- 청소: Use a soft, dry cloth to clean the surface of the alarm clock. Do not use abrasive cleaners or solvents, as they may damage the finish.
- 배터리 교체: Replace the AAA backup batteries annually or when the battery indicator (if present) suggests low power. Ensure the clock is powered by the AC adapter when replacing batteries to avoid losing settings.
- 일반 관리 : Avoid placing the clock in direct sunlight, near heat sources, or in areas with high humidity. Do not expose the unit to water or other liquids.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 비어 있습니다. | No power, or power adapter is disconnected. | Ensure the AC power adapter is securely plugged into the clock and a working wall outlet. Check the power source. |
| 알람이 울리지 않습니다. | 경보가 작동하지 않거나 소리가 너무 작습니다. | Verify the alarm indicator is on. Increase the alarm volume using the VOL+ button. |
| 영상이 흐릿하거나 불분명합니다. | Projection focus is not adjusted. | Rotate the focus ring on the projector until the image is sharp. Ensure the projection distance is within 1.5-3 meters. |
| 예상 시간이 거꾸로 되어 있습니다. | 프로젝션 방향을 조정해야 합니다. | Press the "FLIP" button to reverse the projected image 180 degrees. |
| USB 충전이 작동하지 않습니다. | 기기가 호환되지 않거나 케이블 문제입니다. | Ensure your device is compatible with USB charging. Try a different USB cable. Confirm the clock is powered by AC. |
명세서
- 모델: MS-CR01F
- 디스플레이 유형: 주도의
- 전원: AC 어댑터(포함)
- 배터리 백업 : AAA 배터리 2개 (포함되지 않음)
- 왓tage: 10 와트
- 치수: 20.32 x 3.81 x 9.14cm(8 x 1.5 x 3.6인치)
- 무게: 240g(0.53파운드)
- 투사 거리: Optimal 1.5 - 3 meters (5 - 10 feet)
- 특별 기능: Time Projection, USB Charging Port, Dual Alarms, Snooze, DST, 12/24H Modes, 5-Level Display Dimmer, Adjustable Alarm Volume.
보증 및 지원
Mesqool products are designed and manufactured to the highest quality standards. For any questions, technical support, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Mesqool web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
자세한 내용은 다음을 방문하세요. Mesqool Store on Amazon.
