매뉴얼+

LP 5823861699

LP LP-E6 E6N 배터리 충전기 팩 사용 설명서

소개

This manual provides instructions for the LP LP-E6 E6N Battery Charger Pack. It covers product features, setup, operation, compatibility, safety guidelines, maintenance, troubleshooting, and technical specifications. Please read this manual thoroughly before using the product to ensure proper function and safety.

제품 끝view

The LP LP-E6 E6N Battery Charger Pack is designed to provide reliable power for your compatible Canon cameras. It includes high-capacity batteries and a dual-slot charger for efficient power management.

LP LP-E6 E6N Battery Charger Pack with two batteries and USB cables.

Image: LP LP-E6 E6N Battery Charger Pack with two batteries and USB cables.

패키지 내용

  • 2 LP-E6 LP-E6N Batteries
  • 1 Dual Slot Charger
  • 1 USB 케이블

주요 특징

  • Powerful 2600mAh LP-E6 batteries provide extended usage.
  • Standard compatibility with OEM Canon LP-E6, LP-E6N batteries and LC-E6, LC-E6E chargers.
  • Integrated safety protections: overcharge, over-discharge, short-circuit, surge, over-voltage, 과전류.
  • Dual slot charger allows simultaneous charging of two batteries.
  • Micro-USB input for versatile charging from various power sources.
  • Efficient charging: 5V 2.1A input for approximately 4 hours to fully charge two batteries.
Close-up of an LP-E6 battery highlighting its 2600mAh capacity, 7.4V, and protection features.

Image: Close-up of an LP-E6 battery highlighting its 2600mAh capacity, 7.4V, and protection features.

설치 지침

To set up your LP LP-E6 E6N Battery Charger Pack:

  1. Connect the provided USB cable to the Micro-USB input port on the dual slot charger.
  2. Connect the other end of the USB cable to a compatible 5V 2.1A power source, such as a laptop, car charger, wall charger, or power bank. Ensure the power source provides sufficient current for optimal charging.
Illustration showing multiple ways to charge the LP-E6 dual charger using a laptop, car charger, wall adapter, or power bank.

Image: Illustration showing multiple ways to charge the LP-E6 dual charger using a laptop, car charger, wall adapter, or power bank.

작동 지침

배터리 충전

  1. Insert one or two LP-E6/LP-E6N batteries into the designated slots on the charger. Ensure the battery contacts align correctly with the charger pins.
  2. The LED indicator for each channel (CH1, CH2) will illuminate red, indicating that charging is in progress.
  3. When a battery is fully charged, its corresponding LED indicator will turn green.
  4. Disconnect the charger from the power source and remove the fully charged batteries.

LED 표시등 상태

  • 빨간불: 배터리가 현재 충전 중입니다.
  • 녹색불: 배터리가 완전히 충전되었습니다.
Close-up of the LP-E6 dual charger's LED indicators, showing red for charging and green for fully charged.

Image: Close-up of the LP-E6 dual charger's LED indicators, showing red for charging and green for fully charged.

Diagram illustrating the quick charge feature with 5V/2A Micro USB input.

Image: Diagram illustrating the quick charge feature with 5V/2A Micro USB input.

배터리 사용

Once charged, insert the LP-E6/LP-E6N batteries into your compatible Canon camera or device according to the device's instructions.

An LP-E6 battery being inserted into a compatible Canon camera.

Image: An LP-E6 battery being inserted into a compatible Canon camera.

호환성

The LP LP-E6 E6N batteries and charger are compatible with the following Canon camera models:

  • Canon EOS 5D Mark II, EOS 5D Mark III, EOS 5D Mark IV
  • Canon EOS 5DS, EOS 5DS R
  • Canon EOS 6D, EOS 6D Mark II
  • Canon EOS 7D, EOS 7D Mark II
  • Canon EOS 60D, EOS 60Da, EOS 70D, EOS 80D, EOS 90D
  • Canon EOS R, EOS R5, EOS R6
  • Canon XC10, XC15 Camera

안전 정보

The LP LP-E6 E6N Battery Charger Pack is designed with multiple safety features to protect your batteries and devices. These include:

  • 과충전 보호
  • 과방 전 보호
  • 단락 보호
  • 서지 보호
  • 오버볼tage 보호
  • 과전류 보호
  • 과열 보호

Always use the product as intended and avoid exposing batteries or charger to extreme temperatures, moisture, or physical damage.

Graphic illustrating the multiple charging protection features of the LP-E6 charger, including over-heating, over-voltage, over-current, over-charge, over-discharge, and over-input protection.

Image: Graphic illustrating the multiple charging protection features of the LP-E6 charger, including over-heating, over-voltage, over-current, over-charge, over-discharge, and over-input protection.

유지

To ensure the longevity and optimal performance of your battery charger pack:

  • Keep the charger and batteries clean and dry.
  • 사용하지 않을 때는 배터리를 서늘하고 건조한 곳에 보관하십시오.
  • 배터리와 충전기를 떨어뜨리거나 강한 충격을 가하지 마십시오.
  • Do not disassemble the charger or batteries.

문제 해결

배터리가 충전되지 않음

  • USB 케이블이 충전기와 전원에 모두 단단히 연결되어 있는지 확인하세요.
  • Verify that the power source is active and providing sufficient power (5V 2.1A recommended).
  • Check if the batteries are correctly inserted into the charger slots with contacts aligned.
  • If an LED indicator remains off, try a different battery or charging slot to isolate the issue.

배터리 수명이 짧음

  • Ensure batteries are fully charged (green LED indicator).
  • Battery performance can decrease over time with repeated use. Consider replacing older batteries.
  • Extreme temperatures can affect battery performance. Operate within recommended temperature ranges.

명세서

모델 번호5823861699
배터리 유형리튬 이온
배터리 용량2600mAh (배터리 각 용량)
충전기 입력5V 2.1A (Micro-USB)
충전기 출력8.4V 800mA (per channel)
제품 치수(충전기)약 4.4 x 2.6 x 0.8cm(11.2 x 6.6 x 2인치)
품목 무게10.6온스(0.3킬로그램)
인증CE, FCC, RoHS
Diagram showing the compact dimensions of the LP-E6 dual charger.

Image: Diagram showing the compact dimensions of the LP-E6 dual charger.

보증 및 지원

LP offers a 30-day refund policy and a 1-year after-sales service for this product. Lifetime service and 24-hour (working day) quick and friendly response are also provided. For support, please contact LP customer service.