1. 서론
This manual provides instructions for the installation, operation, and maintenance of your Globe Electric Wireless Plug-In Doorbell Kit, Model 18000083. This kit includes one wireless chime unit and one wireless push button, designed to provide a convenient and reliable doorbell solution for your home. The chime unit offers three selectable tunes for the front entrance and a distinct ding for a secondary entrance.
그림 1: The Globe Electric Wireless Plug-In Doorbell Kit, featuring the main chime unit and the compact wireless push button. The chime unit is designed to plug directly into a standard wall outlet, and the push button is suitable for wall mounting.
2. 안전 정보
- 설치 및 작동 전에 모든 지침을 주의 깊게 읽으십시오.
- Do not expose the push button to extreme temperatures, direct sunlight, or heavy rain for prolonged periods.
- Ensure the chime unit is plugged into a standard, easily accessible wall socket.
- 제품을 직접 분해하거나 수리하려고 하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.
- Keep batteries (for push button) out of reach of children. Dispose of used batteries properly.
3. 패키지 내용
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- 1 x Wireless Chime Unit
- 1 x 무선 푸시 버튼
- 장착 나사
- 마운팅 테이프
- 앵커
4. 설정
4.1. 푸시 버튼 설치
- 위치 선택: Choose a suitable location for the push button, typically near your front door. Ensure the surface is clean and dry. The transmission range is up to 150 ft (45 meters) from the chime unit.
- 배터리 설치 : The push button requires a battery (not included). Open the push button casing (usually by prying open a small notch or unscrewing a cover) and insert the correct battery type, observing polarity. Close the casing 안전하게.
- 장착 옵션:
- Using Mounting Tape: For a quick installation, apply the provided mounting tape to the back of the push button and firmly press it onto the desired surface for at least 30 seconds.
- Using Screws and Anchors: For a more secure installation, mark the desired screw holes on the wall. Drill pilot holes if necessary, insert the anchors, and then secure the push button with the provided screws.
4.2. Plugging in the Chime Unit
- Plug the wireless chime unit into any standard indoor wall socket. Ensure it is within the 150 ft (45 meters) transmission range of the push button.
- Avoid plugging the chime unit into an outlet controlled by a switch, as this may inadvertently turn off the doorbell.
4.3. 페어링 (해당되는 경우)
Your Globe Electric Wireless Doorbell Kit is typically pre-paired at the factory. If the chime does not sound when the push button is pressed after installation, follow these steps to re-pair the units:
- Plug in the chime unit.
- Locate the pairing button on the chime unit (refer to the diagram if available, or look for a small button often labeled "Pair" or "Learn"). Press and hold this button for approximately 3-5 seconds until an indicator light flashes or a short tone is heard.
- Within 10 seconds, press the wireless push button. The chime unit should sound, indicating successful pairing.
- 페어링에 실패하면 단계를 반복하세요.
5. 사용 설명서
5.1. Selecting Chime Tunes
The chime unit offers three selectable tunes for the front entrance and a distinct "ding" for a secondary entrance (if a second push button is paired, though this kit includes only one). To change the tune for the primary push button:
- Locate the tune selection button on the chime unit (often labeled with a musical note or "Tune").
- Press this button repeatedly to cycle through the available melodies. The chime will play each tune as you select it.
- Stop pressing the button when you hear your desired tune. This tune will now be set for the paired push button.
5.2. 변속 범위
The wireless doorbell system has a transmission range of up to 150 feet (approximately 45 meters) in open areas. Environmental factors such as thick walls, metal structures, or other wireless devices may reduce this range. Position the chime unit and push button to minimize obstructions for optimal performance.
6. 유지관리
6.1. 배터리 교체 (버튼식)
When the push button's performance degrades (e.g., reduced range, inconsistent ringing), the battery may need replacement. The push button uses a standard battery type (e.g., CR2032 coin cell or A23 12V, check the specific model for exact type).
- 푸시 버튼을 조심스럽게 열어주세요.asing.
- 오래된 배터리를 제거하고 현지 규정에 따라 폐기하십시오.
- Insert a new battery of the same type, ensuring correct polarity (+ and -).
- C를 닫으세요asing securely. Test the doorbell to confirm functionality.
6.2. 청소
Clean the chime unit and push button with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic finish.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 버튼을 눌러도 차임벨 소리가 나지 않습니다. |
|
|
| Reduced transmission range. |
|
|
| 차임벨 소리가 간헐적으로 울립니다. |
|
|
8. 사양
| 모델 번호 | 18000083 |
| 상표 | 글로브 일렉트릭 |
| 전원(차임) | Plug-in (Standard Wall Socket) |
| 전원(푸시 버튼) | Battery (Type not specified, typically CR2032 or A23) |
| 전송 범위 | 최대 150미터(45피트) |
| 곡 수 | 3 selectable tunes for front entrance, 1 ding for back entrance (if applicable) |
| 색상 | White with black insert |
| 재료 | 플라스틱 |
| Chime Dimensions (approx.) | 1.22 x 3.03 x 4.44인치(3.1 x 7.7 x 11.3cm) |
| Installation Method (Push Button) | Wall-mounted (screws or tape) |
9. 보증 및 지원
9.1. 보증 정보
This Globe Electric Wireless Plug-In Doorbell Kit, Model 18000083, comes with a 1년 보증 구매일로부터 유효합니다. 본 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 단, 오용, 사고, 무단 개조 또는 부적절한 설치로 인한 손상은 보증 대상에서 제외됩니다.
보증 청구를 위해 구매 증명서를 보관하십시오.
9.2. 고객 지원
For technical assistance, troubleshooting, or warranty inquiries, please contact Globe Electric customer support. Refer to the product packaging or the official Globe Electric website for the most current contact information (phone number, email, or support portal).
지원팀에 문의할 때는 제품 모델 번호(18000083)와 구매 증빙 서류를 준비해 두시기 바랍니다.
