제품 끝view
The ICT Billet GM LS OBD2 Dash Diagnostic Port 4-Wire Harness Connector Plug Pigtail (Model CA-WP0BD30) is designed to provide a functional OBD2 diagnostic port for various GM LS engine applications. This pigtail is ideal for LS engine swaps where an OBD2 port is needed, or for replacing a damaged or missing factory diagnostic port. It is assembled with OEM tooling, connectors, locks, seals, and terminals, utilizing OEM harness wire colors for seamless integration.
Image: The ICT Billet OBD2 Diagnostic Port 4-Wire Harness Pigtail, showing the connector and four colored wires extending from it.
주요 특징
- Assembled with OEM tooling, connectors, locks, seals, and terminals for a precise fit.
- Utilizes OEM harness wire colors for straightforward installation and compatibility.
- Enables the addition of an OBDII (OBD2) port for LS engine swap projects.
- Serves as a direct replacement for damaged or non-functional existing OBD2 ports.
- Includes 6 inches of factory color wire for flexible integration.
- Constructed with USA-made OEM grade TXL wire for durability and reliable connections.
상자 안에 무엇이 들어있나요?
- One (1) ICT Billet OBD2 Dash Diagnostic Port Pigtail with 6-inch wire leads.
설치 가이드
This section provides general guidance for installing the OBD2 diagnostic port pigtail. Professional installation is recommended if you are not familiar with automotive electrical systems.
필요한 도구 및 재료(포함되지 않음):
- 와이어 스트리퍼/크림퍼
- Heat shrink tubing or electrical tape
- Solder (optional, for more secure connections)
- Multimeter for verifying connections
- Vehicle-specific wiring diagrams (for your ECM/PCM)
설치 단계:
- 안전이 최우선입니다. 단락이나 손상을 방지하기 위해 전기 작업을 시작하기 전에 차량 배터리를 분리하십시오.
- 장착 위치 식별: Determine a suitable location for the OBD2 port. This is typically under the dashboard on the driver's side. Ensure it is easily accessible and securely mounted.
- Understand Wiring: The pigtail includes four wires. Refer to the OBD2 Port Wiring Diagram below to understand the function of each pin. The pigtail uses OEM wire colors to simplify identification.
- 전선 연결:
- Pin #2 (ECM/PCM Data Line): Connect this wire to the appropriate data line from your vehicle's Engine Control Module (ECM) or Powertrain Control Module (PCM). Consult your vehicle's specific wiring diagram for the correct pin on your ECM/PCM (e.g., blue plug, pin 58 for some LS applications).
- Pin #4 (Chassis Ground): Connect this wire to a reliable chassis ground point on the vehicle. Ensure a clean, secure connection for proper operation.
- Pin #16 (Constant 12V Power): Connect this wire to a constant 12-volt power source. This source should be fused appropriately (e.g., 10A fuse).
- Additional Wires (if applicable): While this pigtail is 4-wire, some applications may require additional connections for specific functions (e.g., Pin #5 for signal ground, if not combined with Pin #4). Always refer to your specific vehicle and ECM/PCM wiring diagrams.
- 보안 연결: Use appropriate connectors (crimp, solder, or heat shrink butt connectors) to ensure secure and insulated connections. Protect all exposed wiring.
- 연결 확인: Before reconnecting the battery, use a multimeter to verify continuity and correct voltage at the OBD2 port pins according to the diagram.
- 배터리를 다시 연결하십시오: 모든 연결이 안전하게 확인되면 차량 배터리를 다시 연결하십시오.
- 테스트 기능: Connect an OBD2 scanner to the newly installed port to confirm proper communication with the vehicle's ECM/PCM.
Image: A diagram illustrating the 16-pin OBD2 connector with pin numbers and their typical functions: Pin #2 (to ECM), Pin #4 (to chassis ground), Pin #16 (positive 12 volt constant).
이미지: 클로즈업 view of the OBD2 connector's pin receptacles, showing the internal contacts.
작동 지침
Once the ICT Billet OBD2 Dash Diagnostic Port is correctly installed and wired, it functions as a standard OBD2 diagnostic port for your vehicle. No special operation is required for the port itself.
- To use the port, simply plug in any standard OBD2 diagnostic scanner or compatible device.
- Ensure the vehicle's ignition is in the "ON" position (engine off or running, depending on the diagnostic task) for the scanner to communicate with the vehicle's computer.
- Follow the instructions provided with your specific OBD2 scanner for reading diagnostic trouble codes (DTCs), viewing live data, or performing other diagnostic functions.
유지
The ICT Billet OBD2 Dash Diagnostic Port Pigtail requires minimal maintenance. Regular inspection can help ensure its longevity and proper function.
- 정기 검사: Periodically check the physical condition of the connector and the wiring. Ensure there are no signs of damage, corrosion, or loose connections.
- 청결: Keep the port free from dirt, dust, and moisture. Use a clean, dry cloth to wipe down the connector if necessary. Avoid using harsh chemicals or abrasive materials.
- 안전한 장착: Ensure the port remains securely mounted in its chosen location to prevent strain on the wiring.
문제 해결
If you encounter issues with your ICT Billet OBD2 Dash Diagnostic Port, consider the following troubleshooting steps:
- No Communication with Scanner:
- Verify that the vehicle's ignition is in the "ON" position.
- Check all wiring connections (Pin #2 to ECM, Pin #4 to ground, Pin #16 to 12V constant) for looseness, corrosion, or incorrect wiring.
- Ensure the 12V power source is active and the fuse is intact.
- Test the OBD2 scanner on another vehicle to confirm it is functional.
- Consult your vehicle's service manual for specific OBD2 communication protocols or common issues.
- 간헐적인 연결:
- Inspect the physical connection of the scanner to the port.
- Check for any loose or damaged wires within the pigtail or at the connection points.
- Ensure the port is securely mounted and not subject to excessive movement or vibration.
- Incorrect Readings/Data:
- This is less common for the port itself and more likely related to the ECM/PCM or the scanner.
- Verify the scanner's settings and compatibility with your vehicle.
- Ensure the ECM/PCM is properly configured for your engine swap.
If issues persist after troubleshooting, it is recommended to consult with a qualified automotive technician.
명세서
| 제조업체 | ICT Billet |
| 모델 번호 | CA-WP0BD30 |
| OEM 부품 번호 | WP0BD30 |
| 품목 무게 | 0.317 온스 |
| 제품 치수 | 2.8 x 5.2 x 1 인치 |
| 원산지 | 미국 |
| 와이어 길이 | 6인치(대략) |
| 와이어 유형 | OEM Grade TXL Wire |
보증 및 지원
For specific warranty information regarding your ICT Billet product, please refer to the documentation included with your purchase or contact ICT Billet directly through their official website or customer service channels. ICT Billet is committed to providing high-quality products and support.
You can visit the official ICT Billet store on Amazon for more products and information: ICT Billet Amazon Store
