소개
This manual provides essential information for the safe and effective installation, operation, and maintenance of your SCHELINGER A51-SPD01-4P-B+C CCS Surge Protector. Please read this manual thoroughly before use and retain it for future reference.
The SCHELINGER A51-SPD01-4P-B+C CCS Surge Protector is designed to protect electrical installations from transient overvoltages caused by lightning strikes or switching operations. It features a fast response time and high stability to ensure reliable protection for your electrical systems.
안전 지침
경고: Electrical installations should only be performed by qualified personnel. Failure to follow these instructions can result in electric shock, fire, or serious injury.
- Always disconnect power to the circuit before installing or servicing the surge protector.
- 현지 및 국가 전기 규정에 따라 적절한 접지를 확보하세요.
- 장치가 손상된 것으로 보이면 작동하지 마세요.
- 기기를 습기와 극한 온도에 두지 마세요.
- 이 장치는 별도의 언급이 없는 한 건조한 실내 환경에서 사용하도록 설계되었습니다.
패키지 내용
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- 1 x SCHELINGER A51-SPD01-4P-B+C CCS Surge Protector (4P 5kA class T1+T2 (B+C))
- 1 x 사용자 매뉴얼(이 문서)
설정 및 설치
The SCHELINGER A51-SPD01-4P-B+C surge protector is designed for mounting on a standard 35 mm DIN rail within an electrical distribution board.
- 전원 차단: Before beginning installation, ensure that the main power supply to the electrical panel is completely disconnected and locked out to prevent accidental re-energization.
- 설치: Snap the surge protector onto the 35 mm DIN rail. Ensure it is securely fastened.
- 배선: Connect the surge protector according to the wiring diagram provided in your electrical panel documentation or by a qualified electrician. Ensure correct phase, neutral, and ground connections. The device is a 4-pole protector.
- 접지: Verify that the grounding connection is robust and compliant with all applicable electrical codes. Proper grounding is critical for effective surge protection.
- 점검: After wiring, visually inspect all connections to ensure they are tight and correct.
- 전원 복원: 설치가 완료되고 확인되면 배전반에 전원을 다시 공급하십시오.
Image: The SCHELINGER A51-SPD01-4P-B+C CCS Surge Protector, typically installed on a DIN rail within an electrical panel. This image shows the device's compact form factor and connection terminals.
작동 지침
The SCHELINGER A51-SPD01-4P-B+C is an automatic surge protection device. Once correctly installed and powered, it operates continuously to protect your electrical system from transient overvoltages. There are no user-adjustable settings or controls.
- 상태 표시기: The device typically includes a visual indicator (e.g., a green/red flag or LED) to show its operational status. A green indicator usually signifies normal operation, while a red indicator or absence of light may indicate that the protection module has been activated and needs replacement. Refer to the device's specific markings for indicator interpretation.
- 자동 보호: The device automatically diverts excess voltage to the ground, protecting connected equipment.
유지
Regular inspection of the surge protector is recommended to ensure its continued effectiveness.
- 시각적 검사: Periodically check the status indicator on the device. If the indicator shows a fault (e.g., red flag), the protection module has likely absorbed a significant surge and requires replacement.
- 청소: 기기에 먼지나 이물질이 없도록 하세요. 청소 시에는 부드럽고 마른 천을 사용하세요. 액체 세제는 사용하지 마세요.
- 전문가 확인: It is advisable to have a qualified electrician inspect your electrical system, including surge protection devices, during routine electrical maintenance.
문제 해결
If you suspect an issue with your surge protector, consider the following:
- No Power to Protected Devices:
- Check the main circuit breaker for the electrical panel.
- Verify that the surge protector's status indicator is green (operational). If it's red, the module may need replacement.
- 모든 배선 연결이 안전한지 확인하세요.
- Frequent Tripping of Circuit Breakers:
- This could indicate a fault in the electrical system or that the surge protector has been repeatedly exposed to surges. Consult a qualified electrician.
- Surge Protector Indicator is Red:
- This indicates that the surge protector has absorbed a significant overvoltage event and its protective elements are exhausted. The module requires replacement to restore protection. Contact a qualified electrician for replacement.
For issues not resolved by these steps, contact a qualified electrician or SCHELINGER customer support.
명세서
| 모델 번호 | A51-SPD01-4P-B+C |
| 보호 등급 | B + C (Type 1 + Type 2) |
| Highest Operating Voltag전자(Uc) | 275V 교류 |
| 임펄스 전류(Iimp) | 5kA |
| 정격 방전 전류(In) | 10kA |
| 최대 방전 전류(Imax) | 50kA |
| 극 수 | 4P |
| 설치 | 35 mm DIN Rail |
| 작동 온도 | -40 °C ~ +80 °C |
| 규정 준수 | EN 61643-11 |
| 제조업체 | BEMKO SP. Z OO |
| 제품 크기(L x W x H) | 6.5 x 7.2 x 9cm |
| 무게 | 380그램 |
| 재료 | 플라스틱 |
| 색상 | 하얀색 |
보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or contact SCHELINGER customer service through their official web사이트 또는 공인 유통업체에 문의하십시오. 구매 증빙 자료로 구매 영수증을 보관하십시오.
제조업체: BEMKO SP. Z OO
모델 참조: A51-SPD01-4P-B+C
