Custom Dynamics PB-45-C Probeam LED Passing Lamp■ 사용 설명서
Model: PB-45-C
1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Custom Dynamics PB-45-C 4.5in. Probeam LED Passing Lamps. These modern LED passing lamps are designed to enhance visibility and safety for your motorcycle.
2. 제품 오버view
The Custom Dynamics PB-45-C Probeam LED Passing Lamps feature a modern design with high lumen output for superior illumination. They are engineered for plug-and-play installation on most models.
주요 특징:
- Modern LED passing lamp 설계
- 500루멘 출력
- 플러그 앤 플레이 설치
- 방수 구조
Figure 2.1: Custom Dynamics PB-45-C Probeam LED Passing Lamp에스. 이들 나는amps feature a sleek, round design with a chrome finish and clear lens, showcasing the internal LED components.
3. 안전 정보
경고: 이 제품은 캘리포니아 주에서 암과 선천적 결함 또는 기타 생식적 피해를 유발하는 것으로 알려진 납을 포함한 화학 물질에 노출될 수 있습니다. 자세한 내용은 www.P65Warnings.ca.gov.
Always ensure the vehicle's power is disconnected before installation. Consult a qualified technician if you are unsure about any installation steps. Wear appropriate safety gear during installation.
4. 설정 및 설치
The PB-45-C lamps are designed for plug-and-play installation. Follow these general steps for installation:
- Ensure the motorcycle's ignition is off and the battery is disconnected to prevent electrical shorts.
- Carefully remove the existing passing lamps from your motorcycle, if applicable.
- Connect the Custom Dynamics PB-45-C lamps to the motorcycle's wiring harness. For models manufactured before 2004, an adapter (part number 2001-1266) is required and sold separately.
- Securely mount the new LED passing lamps in the designated locations.
- Reconnect the battery and test the functionality of the new lamps.
- l을 조정하세요amp angle for optimal beam pattern and visibility.
For detailed vehicle-specific instructions, refer to your motorcycle's service manual.
5. 운영
Once installed, the Probeam LED Passing Lamps operate in conjunction with your motorcycle's existing lighting system. They are designed to provide additional forward and side illumination, enhancing your visibility to other road users and improving your view 도로의.
- Turn on your motorcycle's ignition and headlight switch to activate the passing lamps.
- Ensure both lamps는 올바르게 조명합니다.
- Periodically check the alignment of the lamps to ensure they are providing optimal light distribution without blinding oncoming traffic.
6. 유지관리
The Custom Dynamics PB-45-C LED Passing Lamps require minimal maintenance due to their durable LED technology and waterproof design.
- 청소: 부드러운 천으로 렌즈를 청소하세요.amp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the lens or housing.
- 점검: Periodically inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure mounting hardware remains secure.
- 방수 씰: Do not attempt to open the sealed lamp housing, as this will compromise its waterproof integrity and void the warranty.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Lamps do not illuminate | Loose connection, blown fuse, incorrect wiring, or adapter needed. | Check all connections, inspect vehicle's fuse box, verify wiring against motorcycle's diagram, ensure adapter 2001-1266 is used for pre-'04 models. |
| XNUMX리터amp 작동하지 않음 | 결함있는 lamp, loose connection to one lamp. | Check connection to the non-working lamp. If still not working, contact Custom Dynamics support. |
| 깜빡이는 lamps | 전원 공급이 불안정하거나 연결이 헐거워졌습니다. | 안정적인 볼륨을 확보하세요tage from the motorcycle's electrical system. Check all connections for tightness. |
8. 사양
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | 맞춤 역학 |
| 모델 번호 | PB-45-C |
| Lamp 크기 | 4.5인치 |
| 광 출력 | 500루멘 |
| 색상 | 크롬 |
| 렌즈 색상 | 분명한 |
| 특징 | 방수복 |
| 품목 무게 | 2.85파운드 |
| 한국어: | 644978551043 |
9. 보증 및 지원
For warranty information and technical support, please contact Custom Dynamics directly. Refer to their official website or the product packaging for the most current contact details and warranty policy.
Web대지: www.customdynamics.com
