1. 제품 오버view
The Invacare Tracer EX2 Standard Manual Folding Wheelchair is designed for adults requiring mobility assistance. It features a robust carbon steel frame and a dual-axle design for adjustable seat-to-floor heights. This wheelchair combines durability with user comfort, making it suitable for long-term use.
주요 특징:
- Robust Carbon Steel Frame: Ensures strength and longevity, supporting users up to 250 lbs.
- 이중 차축 설계: Allows for easy conversion to a hemi seat, with adjustable seat-to-floor heights from 17.5" to 19.5".
- Durable Upholstery: Features dual-embossed vinyl seat and back with heavy-duty inner liners to prevent stretching.
- "No Flex" Wheels: Urethane rear tires mounted on "no flex" wheels provide smooth and reliable movement.
- Removable Full-Length Padded Armrests: Enhance comfort and support, aiding in user transfers.
비디오 설명: 이 영상은 360도를 제공합니다 view of the Invacare Tracer EX2 Wheelchair, highlighting its full-length arms and overall design. It demonstrates the wheelchair from various angles, showcasin특징과 구조에 관하여.
2. 설치 및 조립
The Invacare Tracer EX2 wheelchair is designed for straightforward setup. While it often arrives largely pre-assembled, some adjustments and component attachments may be necessary before first use.
2.1 휠체어 펼치기
- Ensure the wheelchair is on a flat, stable surface.
- Grasp the handrims and push outwards to open the frame.
- Press down firmly on the seat rails until the seat is fully flat and locked into position.
2.2 시트 높이 조절 (듀얼 액슬)
The dual-axle design allows for two seat-to-floor height settings: 19.5" (standard) and 17.5" (hemi). To adjust:
- Locate the axle plate on the rear wheels.
- Remove the axle bolt and reposition it to the desired height setting.
- Ensure both sides are adjusted equally and securely fastened.

이미지 설명: 정면 view of the Invacare Tracer EX2 wheelchair. Labels indicate a seat and back width of 18 inches and an adjustable seat height of 17.5 or 19.5 inches. Quick-release brackets for legrests or footrests are also highlighted.
2.3 Attaching Armrests
The wheelchair comes with removable full-length padded armrests. To attach:
- Align the armrest posts with the receptacles on the wheelchair frame.
- Press down firmly until the armrests click securely into place.
- To remove, press the release button (if present) and lift the armrest.

이미지 설명: 측면 view of the Invacare Tracer EX2 wheelchair. Key features such as the full-length removable arms and the "no flex" urethane rear wheels are highlighted. A textual note clarifies that footrests/legrests are not included with this specific listing.
2.4 Footrests/Legrests
Please note that front riggings (footrests/legrests) are not included with this specific wheelchair model and must be acquired separately if needed. The wheelchair is equipped with quick-release brackets for easy attachment of compatible Invacare legrests or footrests without tools.
3. 휠체어 작동
Proper operation ensures safety and comfort for the user.
3.1 Self-Propelling
Users can propel the wheelchair by grasping the handrims on the large rear wheels and pushing forward. The durable handrims provide a good grip for efficient movement.
3.2 Using the Wheel Locks
Always engage the wheel locks when the wheelchair is stationary, especially during transfers or when parking on an incline. To engage, push the lock levers forward until they firmly secure the wheels. To release, pull the levers back.
3.3 Assisting a User
When pushing the wheelchair, use the padded handles located on the back of the chair. Ensure the user's feet are properly positioned on the footrests (if installed) and that the wheel locks are disengaged before moving.
3.4 Transfers
The removable full-length padded armrests can be helpful during transfers. They provide a stable leverage point for users when moving to or from another chair or bed. Ensure wheel locks are engaged before attempting any transfer.
4. 유지관리 및 관리
Regular maintenance will extend the life and ensure the safe operation of your Invacare Tracer EX2 wheelchair.
4.1 청소
- 액자: 탄소강 프레임을 ad로 닦으세요amp 천과 순한 세제. 완전히 말리세요.
- 가구류: The dual-embossed vinyl seat and back can be cleaned with a damp 천과 순한 비누로 닦아주세요. 소재를 손상시킬 수 있는 강한 화학 물질은 피하세요.
- 바퀴: Clean the urethane tires and wheels regularly to remove dirt and debris.
4.2개 검사
다음 구성 요소를 정기적으로 검사하세요.
- 액자: Check for any signs of damage, cracks, or loose connections. The 14-gauge cross braces contribute to the wheelchair's structural integrity.
- 바퀴와 타이어: Ensure tires are free from excessive wear and that wheels spin freely without wobbling.
- 휠 잠금 장치: Verify that wheel locks engage securely and hold the wheels firmly.
- 팔걸이 : Check that armrests are securely attached and padding is intact.
- 패스너: 모든 볼트, 나사 및 고정 장치가 단단히 조여졌는지 확인하십시오. 너무 세게 조이지 마십시오.

이미지 설명: 뒤 view of the Invacare Tracer EX2 wheelchair. The image highlights the durable frame, constructed from heavy-duty carbon steel, capable of supporting up to 250 lbs. It also showcases the dual-embossed padded vinyl seat and back upholstery.
5. 문제 해결
이 섹션에서는 휠체어를 사용하면서 발생할 수 있는 일반적인 문제에 대해 다룹니다.
5.1 Wheelchair Does Not Roll Smoothly
- 장애물 확인: Ensure no debris is caught in the wheels or casters.
- 바퀴 검사: Verify that the wheels are properly aligned and not bent.
- Axle Adjustment: Confirm that the dual-axle is correctly set and secured on both sides.
5.2 Wheel Locks Not Engaging Properly
- Adjust Locks: The wheel locks may need adjustment. Consult a qualified technician if you are unsure how to adjust them.
- 마모 검사: Check the lock mechanisms for wear or damage.
5.3 Difficulty Folding/Unfolding
- 장애물 제거: Ensure no items are preventing the frame from collapsing or expanding fully.
- 매끄럽게 하기: Moving parts of the folding mechanism may require light lubrication.

이미지 설명: 측면 view of the Invacare Tracer EX2 wheelchair shown in its folded configuration. The image highlights its compact 13-inch folded width, designed for convenient travel and storage. Text also indicates that this standard wheelchair weighs 36 lbs without legrests.
If you experience persistent issues not covered here, please contact Invacare customer support.
6. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | TREX28RFP |
| 재료 | Carbon Steel Frame, Dual-Embossed Vinyl Upholstery |
| 좌석 폭 | 18인치 |
| 좌석 깊이 | 16인치 |
| 등 높이 | 16인치 |
| 좌석 높이 조절 가능 | 17.5인치에서 19.5인치까지 |
| 전체 높이 | 35.88인치 |
| 접힌 너비 | 12.25인치 |
| 휠 높이 | 24인치 |
| 제품 무게 | 37 lbs (without front riggings) |
| 중량 용량 | 250파운드 |
| 패키지 크기 | 36.8 x 33 x 13.9 인치 |
| 제조업체 | 인바케어 |
| 첫 번째 이용 가능 날짜 | 11년 2008월 XNUMX일 |
7. 보증 및 지원
Invacare is committed to providing quality products. For specific warranty details regarding your Tracer EX2 wheelchair, please refer to the documentation included with your purchase or contact Invacare directly.
고객 지원:
If you have questions, require assistance, or need to report an issue, please contact Invacare customer service:
- 핸드폰: 1 (800) 333-6900
- Web대지: www.invacare.com (for general information and product support)





