SMARTGEN HAT600N ATS 컨트롤러 사용자 설명서

1. 이상view

The SMARTGEN HAT600N series ATS controller is an intelligent dual-supply module designed for automatic transfer switch (ATS) applications. It features programmable functions, automatic measurement capabilities, an LCD display, and digital communication. This controller integrates digital intelligence and networking to minimize operational errors, making it an ideal solution for ATS systems.

At its core, the HAT600N series ATS controller utilizes a microprocessor to accurately detect 2-way-3-phase voltage. It can make precise judgments and output passive control switch commands in response to abnormal voltage conditions, including over/under voltage, phase loss, and over/under frequency. The controller is designed with comprehensive consideration for various ATS applications, allowing direct use with Intelligent ATS, Contactor ATS, and Circuit Breaker ATS systems. Its compact structure, advanced circuitry, simple wiring, and high reliability make it suitable for a wide range of applications in electric power, telecommunications, petroleum, coal, metallurgy, railways, municipal administration, intelligent buildings, electrical devices, automatic control, and testing systems.

그림 1: 전면 view of the SMARTGEN HAT600N ATS Controller. This image displays the controller's user interface, including the LCD screen, alarm indicator, setting buttons, and operational mode buttons (Manual, Auto, Open, Close, Test).

2. 성능 및 특징

• System type can be set for: Mains (1#) & Mains (2#), Mains (1#) & Generator (2#), Generator (1#) & Mains (2#), Generator (1#) & Generator (2#).
• Backlit 128x64 LCD, optional Chinese and English display, push-button operation.
• 2-way 3상 Vol 측정 및 표시tage와 주파수:
  • 1 # : 라인-라인 볼륨tage (Uab, Ubc, Uca), Line-Nature voltage (Ua, Ub, Uc), Frequency (F1)
  • 2 # : 라인-라인 볼륨tage (Uab, Ubc, Uca), Line-Nature voltage (Ua, Ub, Uc), Frequency (F2)
• Measure and display active power, apparent power, power factor and 3 phase current.
• Over current alarm.
• 오버/언더 볼륨tage, 위상 손실, 역상 시퀀스, 주파수 초과/과소 보호.
• Automatic/Manual mode. In manual mode, can force switch to close or open.
• All parameters can be set on site. With two different passwords which ensures authorized staff operation only.
• During genset testing ATS controller can be set either On-load or Off-load mode.
• ATS 컨트롤러는 자동 재폐쇄 기능을 가지고 있습니다.
• 폐쇄 출력 신호는 일정 간격으로 설정하거나 연속 출력으로 설정할 수 있습니다.
• 1중립 위치 ATS, 2중립 위치 ATS 및 전환에 적용 가능합니다.
• 발전기와 주전원을 위한 2개의 분리된 중성선에 적용됩니다.
• 실시간 시계(RTC).
• 이벤트 로그는 99개 항목을 순환적으로 기록할 수 있습니다.
• 시간 일정은 월 단위 또는 주 단위로 설정할 수 있으며, 시험 운행은 온로드 또는 오프로드로 설정할 수 있습니다.
• Can control two generators to work in a cycle, even the genset running time and crank rest time can be set.
• 광범위한 DC 전원 공급(8V~35V). 최대 80V DC 입력은 즉시 견딜 수 있거나 HWS560 모듈을 통해 공급할 수 있습니다(입력 AC 85V~560V, 출력 DC 12V).
• AC 입력 단자 연결 간격이 넓음. 최대 625V 입력 전압tage.
• With standard isolated RS485 communication interface. With "remote controlling, remote measuring, remote communication" function by the ModBus communication protocol.
• 컨트롤러의 현재 상태(스위치 디지털 입력, Vol. 1 이상 포함)를 확인할 수 있습니다.tage, 그리고 Vol. 아래에tage 등).
• 다양한 AC 시스템(3상 4선식, 3상 3선식, 단상 2선식, 2상 3선식)에 적합합니다.
• 모듈식 설계, 내화성 ABS 플라스틱 셸, 플러그인 단자 및 임베디드 설치. 설치가 간편한 컴팩트한 구조.

3. 설정 및 설치

Proper installation is crucial for the safe and reliable operation of the HAT600N ATS Controller. This section provides general guidance; always refer to the detailed wiring diagrams and local electrical codes.

3.1 배선도

The HAT600N controller supports various ATS configurations. Below are illustrative wiring diagrams for common setups. Ensure you select the correct diagram for your specific ATS type (ATS3, SGQ-N/T, SGQ-M, VITZRO).

Figure 2: Comprehensive wiring diagrams for different ATS control module types compatible with the HAT600N. Each diagram illustrates connections for 1# Voltage Input, 2# Voltage Input, 3-Phase Current Input, and RS485 communication, along with load and generator connections.

3.2 장착

The HAT600N features a modular design for embedded installation. Ensure adequate space for ventilation and access to terminals. The panel cutout dimensions are 186mm x 141mm.

3.3 전원 공급

The controller operates on a wide DC power supply range of 8V to 35V. It can withstand a maximum 80V DC input momentarily. Alternatively, it can be supplied via an HWS560 module (AC 85V~560V input, DC 12V output).

3.4 AC 볼륨tage 입력

The controller supports various AC systems (3-phase 4-wire, 3-phase 3-wire, single-phase 2-wire, and 2-phase 3-wire). Ensure correct wiring for voltage inputs (L-L and L-N) as per the specific model variant (HAT600N/HAT600NI or HAT600NB/HAT600NBI).

4. 사용 설명서

The HAT600N ATS Controller offers both automatic and manual operating modes, controlled via its push-button interface and LCD display.

4.1 모드 선택

• 자동 모드: The controller continuously monitors the primary and secondary power sources. Upon detection of an abnormality in the primary source, it automatically initiates the transfer sequence to the secondary source. Once the primary source recovers, the system automatically transfers back.
• 수동 모드: Allows for manual control of the transfer switch. In this mode, operators can force the switch to close or open using the dedicated buttons on the controller's front panel. This mode is typically used for testing or maintenance.

4.2 파라미터 설정

All operational parameters can be configured directly on site using the controller's push-buttons and LCD display. Access to these settings is protected by two different password levels to ensure only authorized personnel can make adjustments. Parameters include system type, voltage/frequency thresholds, transfer delays, and scheduling for genset trials.

4.3 모니터링

The LCD display provides real-time monitoring of 2-way 3-phase voltage, frequency, active power, apparent power, power factor, and 3-phase current for both power sources. The controller also logs up to 99 events circularly, providing a history of operations and alarms.

5. 사양

The following table details the technical specifications of the SMARTGEN HAT600N ATS Controller:

6. 유지관리

To ensure the longevity and optimal performance of your SMARTGEN HAT600N ATS Controller, regular maintenance is recommended. While the controller is designed for high reliability, periodic checks can prevent potential issues.

• 시각적 검사: Periodically inspect the controller for any signs of physical damage, loose connections, or dust accumulation.
• 청소: Keep the controller's exterior and display clean using a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• 터미널 점검: Ensure all wiring terminals are securely fastened. Loose connections can lead to intermittent operation or damage.
• 환경 조건: Verify that the operating environment remains within the specified temperature and humidity ranges to prevent premature component failure.
• 펌웨어 업데이트: 제조사 확인해보세요 web성능 향상이나 알려진 문제 해결에 도움이 될 수 있는 펌웨어 업데이트가 있는지 해당 사이트를 확인하십시오.

For any complex maintenance or repairs, it is recommended to contact qualified service personnel or SMARTGEN technical support.

7. 문제 해결

This section provides general guidance for common issues you might encounter with the HAT600N ATS Controller. For detailed diagnostics, refer to the full product manual or contact technical support.

• 컨트롤러 전원이 켜지지 않음:
  • Check the DC power supply connections and ensure the voltage는 8V-35V 범위 내에 있습니다.
  • If using an HWS560 module, verify its AC input and DC output.
  • Inspect fuses if present in the power supply line.
• Automatic Transfer Not Occurring:
  • Ensure the controller is in "Automatic Mode".
  • 볼륨 확인tage and frequency readings on the LCD for both sources to confirm abnormalities are detected.
  • Verify that protection parameters (over/under voltage, frequency, phase loss) are correctly set and not preventing transfer.
  • Inspect control wiring to the ATS mechanism.
• LCD 화면에 잘못된 수치가 표시됨:
  • Verify AC voltage and current input wiring according to the appropriate diagram (Figure 2).
  • Ensure the system type (3-phase 4-wire, etc.) is correctly configured in the controller settings.
• 통신 문제(RS485):
  • Check RS485 wiring for correct polarity and secure connections.
  • Verify ModBus communication parameters (baud rate, address) are correctly set on both the controller and the connected device.

If the issue persists after performing these checks, contact SMARTGEN technical support for further assistance.

8. 보증 및 지원

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official SMARTGEN website. Warranty terms typically cover manufacturing defects under normal operating conditions.

For technical support, troubleshooting assistance, or inquiries about spare parts, please contact SMARTGEN customer service. You can find contact information on the SMARTGEN-America web사이트 또는 지역 유통업체를 통해 구매하세요.

When contacting support, please have your product model (HAT600N) and any relevant purchase details ready to facilitate a quicker resolution.