Glovii GLG 발열 만능 장갑 사용 설명서

1. 서론

This manual provides essential instructions for the safe and effective use, setup, operation, and maintenance of your Glovii GLG Heated Universal Gloves. Please read this manual thoroughly before using the product and retain it for future reference.

2. 안전 정보

부상이나 제품 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.

• Do not use the gloves if they are wet or damp.
• Do not puncture, cut, or modify the heating elements or wiring.
• Keep batteries away from fire, water, and extreme temperatures.
• Use only the charger provided by Glovii for charging the batteries.
• If you experience discomfort, excessive heat, or skin irritation, discontinue use immediately.
• Not suitable for individuals with pacemakers or other medical implants without consulting a doctor.
• 사용하지 않을 때는 배터리를 서늘하고 건조한 곳에 보관하십시오.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• Glovii GLG Heated Universal Gloves (1 pair)
• Li-Poly Batteries (2 units, 2100mAh / 15.54Wh)
• 배터리 충전기(8.4V, 1A)
• 연장 케이블
• 보관 케이스

4. 제품 오버view

The Glovii GLG Heated Universal Gloves are designed to provide thermal comfort in cold conditions. Key features include:

• Carbon Fiber Heating Elements: Located around all fingers for consistent warmth.
• Li-Poly Battery: Provides power for the heating system with an integrated energy gauge.
• Battery Pocket: Conveniently located in the glove cuff for secure storage.
• 터치스크린 호환성: Conductive material on the thumb and index finger allows for use with touchscreens.
• Adjustable Heat Modes: Three heat settings (LO, MED, HI) for customized warmth.

This image displays the Glovii GLG Heated Universal Gloves, illustrating the internal heating elements glowing red, indicating active warmth. The gloves are grey with the Glovii logo on the cuff and a control button.

정면 view of the Glovii GLG Heated Universal Gloves in grey, showing the overall design, the Glovii logo, and the power/heat control button on the cuff. The drawstring at the wrist is also visible.

A thermal imaging photograph of the Glovii GLG Heated Universal Gloves, illustrating the heat distribution across the fingers and palm in warm yellow and orange tones against a cooler purple background, demonstrating the effectiveness of the heating elements.

5. 설정

5.1. 배터리 충전

1. 제공된 충전기를 전원 콘센트에 연결하세요.
2. Connect each Li-Poly battery to the charger. The indicator light on the charger will show charging status.
3. Charge batteries fully before first use. Charging time may vary.
4. Disconnect batteries once fully charged to prolong battery life.

5.2. 장갑에 배터리 넣기

1. Locate the battery pocket inside the cuff of each glove.
2. Carefully insert a charged battery into each pocket.
3. 장갑의 배터리 케이블을 배터리에 연결하십시오. 단단히 연결되었는지 확인하십시오.
4. If using the extension cable, connect it between the glove's cable and the battery, allowing the battery to be stored in an inside jacket pocket.

This image shows the cuff of the Glovii GLG Heated Universal Glove pulled back to reveal the internal pocket where the red Li-Poly battery is inserted. The battery is connected to the glove's heating system.

6. 사용 설명서

6.1. 전원 켜기 / 끄기

1. To power on, press and hold the control button on the glove cuff for approximately 3 seconds until the indicator light illuminates.
2. To power off, press and hold the control button for approximately 3 seconds until the indicator light turns off.

6.2. Adjusting Heat Modes

Once powered on, short press the control button to cycle through the heat settings:

• High (HI): Indicator light will be brightest. Provides maximum heat. (Approx. 2 hours operating time)
• Medium (MED): Indicator light will be at a medium brightness. (Approx. 3 hours operating time)
• Low (LO): Indicator light will be dimmest. Provides gentle warmth. (Approx. 6 hours operating time)

자세한 view of the power and heat setting control button on the cuff of the Glovii GLG Heated Universal Glove. The button is black with a red illuminated heating symbol, indicating the glove is active.

6.3. 터치스크린 기능

The special conductive material on the thumb and index finger of each glove allows you to operate touchscreen devices without removing your gloves. Ensure the conductive tips make full contact with the screen.

This image highlights the index finger and thumb of a Glovii GLG Heated Universal Glove, which feature dark grey conductive material for touchscreen compatibility. The glove is grey with a drawstring cuff.

7. 유지관리

7.1. 청소 지침

• 청소하기 전에 항상 배터리를 제거하십시오.
• Hand wash the gloves gently in cold water with mild detergent.
• 표백, 다림질, 드라이클리닝을 하지 마십시오.
• Hang to air dry completely before reinserting batteries or storing. Do not tumble dry.

7.2. 배터리 관리 및 보관

• Charge batteries at least once every 3-6 months, even if not in use, to maintain battery health.
• 배터리는 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• Do not store batteries connected to the gloves for extended periods.

8. 문제 해결

• 장갑이 발열되지 않음:
  • 배터리가 완전히 충전되었고 올바르게 삽입되었는지 확인하세요.
  • Check that the battery cable is securely connected to the glove.
  • Press and hold the power button for 3 seconds to ensure the gloves are powered on.
• 배터리가 충전되지 않음:
  • Verify the charger is properly connected to a power outlet and the battery.
  • Ensure the charger is the original Glovii charger.
• 짧은 작동 시간:
  • Operating time varies significantly with the selected heat mode (HI mode consumes more power).
  • 사용하기 전에 배터리가 완전히 충전되었는지 확인하십시오.
  • 극도로 낮은 온도에서는 배터리 성능이 저하될 수 있습니다.

9. 사양

10. 보증 및 지원

For warranty information or technical support, please refer to the documentation included with your purchase or contact Glovii customer service directly. Keep your proof of purchase for any warranty claims.