소개
This manual provides essential information for the installation, operation, and maintenance of the ESBE VTC422 DN25 Charging Valve. The VTC400 series is specifically designed for integration with buffer tanks in heating systems to ensure optimal performance and longevity.
Please read this manual thoroughly before installation and operation to ensure safe and correct usage.
제품 끝view
The ESBE VTC422 DN25 is a thermostatic charging valve designed to protect boilers from low return water temperatures. It ensures that the boiler reaches a high operating temperature quickly, which helps to prevent tarring and extends the boiler's lifespan. This model features a G 1" connector and operates within a temperature range of 50-70 °C.
그림 1: ESBE VTC422 DN25 Charging Valve. This image shows the brass body of the valve with three threaded connections and a black plastic housing at the bottom containing the thermostatic element. The ESBE logo is visible on the side.
안전 지침
- Always ensure the system is depressurized and cooled before attempting any installation or maintenance.
- Installation should be performed by a qualified professional in accordance with local regulations and standards.
- 설치 및 유지관리 시에는 적절한 개인 보호 장비(PPE)를 착용하세요.
- Do not modify the valve or its components. Use only genuine ESBE spare parts.
- 누수를 방지하기 위해 모든 연결부가 제대로 밀봉되었는지 확인하십시오.
설정 및 설치
사전 설치 확인
- Verify that the valve model (VTC422 DN25) and temperature range (50-70 °C) are suitable for your heating system and boiler.
- 설치하기 전에 밸브에 눈에 띄는 손상이 있는지 검사하십시오.
- Ensure all necessary tools and fittings (G 1" connectors) are available.
설치 단계
- Position the valve correctly in the heating circuit, typically on the return line to the boiler, before the buffer tank connection. Refer to the system's hydraulic diagram for precise placement.
- Connect the valve to the piping using appropriate G 1" fittings. Ensure connections are tight but do not overtighten.
- The valve has three ports: boiler return, buffer tank return, and boiler supply. Ensure correct flow direction as indicated on the valve body or in the system diagram.
- After installation, slowly fill the system and check for leaks at all connections.
- Bleed air from the system as per boiler manufacturer instructions.
작동 원리
The ESBE VTC422 DN25 is a thermostatic mixing valve that automatically regulates the temperature of the water returning to the boiler. When the boiler starts, the valve ensures that cold return water from the buffer tank is mixed with hot water from the boiler's flow, quickly raising the boiler's return temperature to the set point (50-70 °C). This prevents condensation and corrosion within the boiler.
Once the boiler reaches its operating temperature and the buffer tank is being charged, the valve gradually opens to allow more hot water from the boiler to flow into the buffer tank, while maintaining the minimum return temperature to the boiler.
유지
정기 점검
- 밸브와 연결 부위에 누출이나 부식 흔적이 있는지 정기적으로 점검하십시오.
- Ensure the system pressure is within the recommended range.
청소
The valve is generally maintenance-free. If blockages or performance issues occur due to sediment, the system should be flushed. For internal cleaning or replacement of thermostatic elements, it is recommended to consult a qualified technician.
구성 요소 교체
If the thermostatic element or other internal components require replacement, use only original ESBE spare parts. This procedure should be carried out by a trained professional.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 보일러 반환 온도가 너무 낮습니다. | Valve not opening correctly, sediment buildup, incorrect installation. | Check system pressure, flush system, verify installation direction, consult technician. |
| Poor heat transfer to buffer tank. | Valve not opening fully, air in system, incorrect sizing. | Bleed air from system, verify valve operation, ensure correct valve sizing for application. |
| 연결부 누수. | Loose fittings, damaged seals, incorrect thread sealant. | Tighten connections, replace seals, reapply thread sealant. |
For persistent issues, contact a qualified heating system technician or ESBE customer support.
명세서
- 모델: ESBE VTC422 DN25
- 부품 번호: 51060600
- 상표: 에스베
- 재료: 금속(황동)
- 연결 유형: G 1" (External Thread)
- 호칭 직경(DN): 25
- 온도 범위: 50~70 °C
- 치수(길이 x 너비 x 높이): 5.59 x 8.41 x 12.19cm (약 5.6 x 8.4 x 12.2cm)
- 무게: 771.11그램(약 1.7파운드)
- 포트 수 : 3
- 외부 마감 : 그린
보증 및 지원
For warranty information, please refer to the official ESBE website or contact your local ESBE distributor. Keep your proof of purchase for warranty claims.
For technical support, spare parts, or further assistance, please visit the official ESBE website or contact their customer service department. Contact details can typically be found on the ESBE official web대지: www.esbe.eu
