1. 서론
This manual provides essential instructions for the safe and effective operation, maintenance, and care of your Hyper Tough AQ15013G 6.0A Angle Grinder. Please read this manual thoroughly before using the tool and keep it for future reference. Understanding and following these instructions will help ensure safe operation and prolong the life of your tool.
2. 중요한 안전 정보
경고: 이 전동 공구와 함께 제공된 모든 안전 경고, 지침, 그림 및 사양을 읽으십시오. 아래 나열된 모든 지침을 따르지 않으면 감전, 화재 및/또는 심각한 부상을 입을 수 있습니다.
일반 전동 공구 안전 경고
- 작업 영역 안전: 작업 공간은 깨끗하고 밝게 유지하십시오. 어수선하거나 어두운 공간은 사고를 유발할 수 있습니다. 인화성 액체, 가스 또는 분진과 같은 폭발 위험 환경에서는 전동 공구를 작동하지 마십시오.
- 전기 안전: 전동 공구 플러그는 콘센트와 일치해야 합니다. 플러그를 어떤 식으로든 개조하지 마십시오. 접지된 표면에 신체가 닿지 않도록 하십시오.
- 개인 안전: Always wear eye protection. Use personal protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection for appropriate conditions. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- 도구 사용 및 관리: 전동 공구에 무리한 힘을 가하지 마십시오. 사용 용도에 맞는 전동 공구를 사용하십시오. 조정, 액세서리 교체 또는 전동 공구 보관 시에는 반드시 전원 플러그를 분리하십시오.
Specific Safety Rules for Grinders
- Always use a wheel guard that is properly secured and positioned for maximum safety.
- Ensure the accessory is correctly attached and tightened before use.
- Do not use damaged or incorrect grinding wheels. Always use wheels rated for the grinder's speed.
- 작동 중에는 두 손으로 도구를 단단히 잡으세요.
- 회전하는 부품에 손이 닿지 않도록 하십시오.
- Be aware of sparks and flying debris. Ensure bystanders are at a safe distance.
캘리포니아 제안 65 경고
경고: 파워 샌딩, 톱질, 연삭, 드릴링 및 기타 건설 활동으로 인해 생성되는 일부 먼지에는 캘리포니아 주에서 암, 선천적 기형 또는 기타 생식 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있습니다. 일부 전amples of these chemicals are: Lead from lead-based paints, Crystalline silica from bricks and cement and other masonry products, and Arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well-ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
3. 제품 오버view
The Hyper Tough AQ15013G is a 6.0A angle grinder designed for various grinding and cutting tasks on metal or masonry. It features a powerful ball-bearing motor that provides smooth operation and an adjustable guard for enhanced safety.
Figure 3.1: Hyper Tough 6.0A Angle Grinder in its retail packaging, highlighting key features.
구성 요소:
- 6.0A Motor: Powerful motor for demanding tasks.
- Die-cast Gear Housing: Durable construction for long-term wear.
- Top-mounted Slide Lock Switch: For easy tool activation and continuous operation.
- 스핀들 잠금: Facilitates quick and easy wheel changes.
- Adjustable Metal Wheel Guard: Provides protection from sparks and debris, adjustable for different angles.
- Screw-on Side Handle: Can be mounted on either side for left or right-handed use.
- 4 1/2 inch Grinding Wheel: One grinding wheel is included for immediate use.
- Mounting Wrench: Included for wheel installation and removal.
- 6피트 전원 코드: 제공합니다 amp르 도달.
Figure 3.2: The angle grinder displayed with its included accessories: side handle, wrench, and grinding wheel.
Figure 3.3: The Hyper Tough angle grinder with a 4 1/2 inch grinding wheel properly installed and the adjustable guard in position.
그림 3.4: 클로즈업 view of the included 4 1/2 inch (115mm) metal grinding wheel, showing its specifications and safety pictograms.
4. 설치 및 조립
Before operating the angle grinder, ensure it is properly assembled and all components are securely fastened.
- 측면 핸들 부착: The side handle can be screwed into either of the two threaded holes on the gear housing. Choose the side that provides the most comfortable and secure grip for your dominant hand. Tighten the handle firmly by hand.
- 휠 가드 조정: The metal wheel guard is adjustable. Loosen the guard clamp screw, rotate the guard to a position that best protects against sparks and debris for your specific task, then tighten the clamp screw firmly to secure the guard in place. Ensure the guard is always positioned between you and the rotating wheel.
- Installing/Changing Grinding Wheels:
- 도구의 전원 플러그가 뽑혀 있는지 확인하세요.
- 기어 하우징 상단에 있는 스핀들 잠금 버튼을 길게 누르십시오.
- Using the included mounting wrench, loosen and remove the outer flange nut by turning it counter-clockwise.
- Place the desired 4 1/2 inch grinding or cutting wheel onto the spindle, ensuring it sits flush against the inner flange. The wheel should fit snugly without excessive play.
- Re-attach the outer flange nut and tighten it securely with the wrench while continuing to hold the spindle lock button. Do not overtighten.
- Release the spindle lock button and manually spin the wheel to ensure it is properly seated and rotates freely without wobbling.
5. 사용 설명서
앵글 그라인더를 작동하기 전에는 항상 보안경, 청력 보호구, 장갑을 포함한 적절한 개인 보호 장비를 착용하십시오.
- 전원 연결: Ensure the tool's slide lock switch is in the "OFF" (rearward) position before plugging the 6 ft. power cord into a suitable 120V AC power outlet.
- 도구 시작: To start the grinder, slide the top-mounted lock switch forward. For continuous operation, push the switch further forward until it locks into place.
- 도구 중지: To stop the grinder, release the slide lock switch. If the switch is locked for continuous operation, press the rear of the switch to release it, and the tool will power off.
- 연삭/절단 기술:
- Always hold the grinder firmly with both hands, one on the main handle and one on the side handle.
- Allow the grinding wheel to reach full operating speed (11,500 RPM) before contacting the workpiece.
- Apply light, even pressure. Do not force the tool, as this can lead to kickback, wheel damage, or motor strain.
- Maintain a stable stance and keep bystanders clear of the work area.
- Direct sparks and debris away from yourself, others, and flammable materials.
- For cutting, use a cutting wheel and make shallow passes, gradually deepening the cut.
6. 유지관리
Regular maintenance ensures optimal performance and extends the life of your angle grinder. Always unplug the tool before performing any maintenance.
- 청소: Regularly clean the tool's ventilation openings to prevent dust buildup and overheating. Use a soft brush or compressed air to clear debris. Do not use water or chemical solvents, as they can damage the tool.
- 휠 검사: Before each use, inspect the grinding or cutting wheel for cracks, chips, excessive wear, or any other damage. Replace damaged wheels immediately. Never use a wheel that is not in perfect condition.
- 코드 검사: Periodically check the power cord for any signs of damage, such as cuts, fraying, or exposed wires. Do not use the tool if the cord is damaged; have it repaired by a qualified technician.
- 브러시 교체: Carbon brushes may wear down over time. If the tool experiences reduced power or intermittent operation, the brushes may need inspection or replacement. This should be performed by a qualified service center.
- 저장: Store the angle grinder in a dry, secure place where it is protected from moisture and extreme temperatures. Keep it out of reach of children and unauthorized users.
7. 문제 해결
If you encounter issues with your Hyper Tough AQ15013G Angle Grinder, refer to the table below for common problems and solutions.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 도구가 시작되지 않음 | 전원 공급 없음; 스위치 결함; 전원 코드 손상 | Check power outlet and circuit breaker; Inspect power cord for damage; Ensure switch is fully engaged; Contact qualified service personnel if issues persist. |
| 작동 중 과도한 진동 | Damaged or improperly installed wheel; Loose components (e.g., side handle, guard); Worn motor bearings | Inspect and replace wheel if necessary; Ensure wheel is correctly seated and flange nut is tightened; Check all components for tightness; If vibration persists, seek professional service. |
| 도구가 빨리 과열됩니다 | Blocked ventilation openings; Overloading the tool; Continuous heavy use | Clean ventilation slots thoroughly; Reduce pressure on the workpiece; Allow the tool to cool down periodically during extended use. |
| 전력 감소 또는 간헐적 작동 | Worn carbon brushes; Loose electrical connections | Have carbon brushes inspected and replaced by a qualified technician; Check power cord connections. |
8. 사양
Key technical specifications for the Hyper Tough AQ15013G 6.0A Angle Grinder:
- 모델: AQ15013G
- 모터: 6.0 Amp
- 무부하 속도: 11,500 RPM
- 휠 지름 : 4 1/2인치(115mm)
- 전원 코드 길이: 6의 피트 (1.8 m)
- 제품 크기(길이 x 너비 x 높이): 13.74 x 8.87 x 6.71 인치
- 품목 무게: 4.93파운드
- 권tage: 120V AC, 60Hz
9. 보증 및 지원
The Hyper Tough AQ15013G 6.0A Angle Grinder comes with a 2-year limited warranty. This warranty covers defects in material and workmanship under normal use. For warranty claims, technical support, or to locate an authorized service center, please refer to the contact information provided with your original purchase documentation or visit the official Hyper Tough web사이트. 보증 확인을 위해 구매 증빙 자료를 보관하세요.
