iHip WLGCLOCHGR-BK

iHip 5W Qi Wireless Charging Alarm Clock Bluetooth Speaker with FM Radio

사용자 설명서

소개

This manual provides instructions for the operation and maintenance of your iHip 5W Qi Wireless Charging Alarm Clock Bluetooth Speaker with FM Radio. This device integrates multiple functions including a digital alarm clock, a Bluetooth speaker for audio playback, an FM radio, and a 5W Qi wireless charging pad for compatible devices. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

  • 1 x Wireless Alarm Clock FM Radio Charging Clock
  • 1 x 마이크로 USB 충전 케이블
  • 1 x 보조 케이블
  • 1 x 사용자 설명서
Contents of the iHip wireless charger box, showing the alarm clock, a micro-USB charging cable, an aux cable, and the user manual.

Image: Contents of the product package, including the main unit, charging cable, aux cable, and user manual.

제품 끝view

Familiarize yourself with the various components and controls of your device.

전면 패널 및 디스플레이

앞쪽 view of the iHip alarm clock with a red LED display showing 07:30 and control buttons above it.

이미지: 앞면 view of the device, highlighting the LED time display and control buttons.

  • LED 디스플레이: Shows current time, alarm status, and FM frequency.
  • 제어 버튼: Located above the display, these buttons manage power, mode selection, alarm settings, volume, and track control.

후면 패널 및 포트

뒤쪽 view of the iHip alarm clock showing an AUX port, an ON/OFF switch, and a Micro-USB Charging Port.

이미지: 후면 view of the device, indicating the AUX port, ON/OFF switch, and Micro-USB charging port.

  • AUX 포트 : For connecting external audio devices via the provided aux cable.
  • 온 / 오프 스위치: 장치의 전원을 켜거나 끕니다.
  • 마이크로 USB 충전 포트: Connects the device to a power source using the Micro-USB charging cable.

상단 패널

  • 무선 충전 패드: The flat surface on top of the device for Qi-enabled wireless charging.

설정

1. 전원 연결

  1. Connect the Micro-USB charging cable to the Micro-USB Charging Port on the rear of the device.
  2. 케이블의 다른 쪽 끝을 호환되는 USB 전원 어댑터(별도 구매)에 연결한 다음 벽면 콘센트에 꽂으십시오.
  3. 뒤집다 켜짐/꺼짐 스위치 to the 'ON' position. The LED display will illuminate.

2. 초기 시간 설정

처음 전원을 켤 때 또는 정전 후에는 시간을 설정해야 할 수 있습니다.

  1. 를 누르고 계세요 시간 설정 button (often indicated by a clock icon) until the hour digits begin to flash.
  2. 사용하세요 +/- 버튼으로 시간을 조정합니다.
  3. 를 누르세요 시간 설정 분 조정으로 전환하려면 버튼을 다시 누르세요.
  4. 사용하세요 +/- 버튼을 사용하여 분을 조정합니다.
  5. 를 누르세요 시간 설정 버튼을 한 번 더 눌러 시간 설정 모드를 확인하고 종료합니다.

Note: This device may display time in a 24-hour (military) format only. There might not be an option to switch to a 12-hour AM/PM format.

작동 지침

1. 블루투스 스피커 기능

  1. 장치의 전원이 켜져 있는지 확인합니다.
  2. 를 누르세요 방법 button (often indicated by an 'M' or mode icon) until 'BT' or 'Bluetooth' appears on the display, indicating Bluetooth pairing mode.
  3. 모바일 기기에서 블루투스를 활성화하고 사용 가능한 기기를 검색하세요.
  4. Select 'iHip Speaker' or a similar name from the list to pair. A confirmation tone may sound upon successful pairing.
  5. You can now play audio from your mobile device through the speaker. Use the +/- buttons for volume control and 이전/다음 트랙 트랙 탐색용 버튼.

2. FM 라디오 작동

  1. 를 누르세요 방법 'FM'이 디스플레이에 나타날 때까지 버튼을 누르세요.
  2. 를 누르고 계세요 재생/일시정지 button (often indicated by a play icon) to initiate an automatic scan for FM stations. The device will save found stations.
  3. 사용하세요 이전/다음 트랙 저장된 FM 방송국을 탐색하는 버튼입니다.
  4. 를 사용하여 볼륨을 조정합니다. +/- 버튼.

3. Wireless Charging Functionality

This device features a 5W Qi wireless charging pad compatible with Qi-enabled smartphones.

A hand placing a smartphone onto the top of the iHip alarm clock, which has a wireless charging symbol, indicating active wireless charging.

Image: A smartphone being placed on the wireless charging pad of the device.

  1. Ensure the device is powered on and connected to a power source.
  2. Place your Qi-enabled smartphone directly onto the center of the wireless charging pad on top of the alarm clock.
  3. The phone should indicate that it is charging. If not, slightly adjust the phone's position until charging begins.

Note: For phones without built-in Qi functionality, an external Qi receiver (not included) is required. Charging speed may vary depending on the phone model and its battery level.

4. 알람 시계 설정

  1. 를 누르고 계세요 알람 설정 button (often indicated by an alarm clock icon) until the hour digits of the alarm time begin to flash.
  2. 사용하세요 +/- 알람 시간을 조정하는 버튼입니다.
  3. 를 누르세요 알람 설정 분 조정으로 전환하려면 버튼을 다시 누르세요.
  4. 사용하세요 +/- 알람 시간을 조정하는 버튼입니다.
  5. 를 누르세요 알람 설정 버튼을 한 번 더 눌러 알람 설정 모드를 확인하고 종료합니다.
  6. 알람을 활성화 또는 비활성화하려면 버튼을 누르십시오. 알람 설정 button briefly. An alarm icon on the display will indicate if the alarm is active.
  7. When the alarm sounds, press any button to silence it. This device typically does not feature a snooze function.

5. 핸즈프리 통화

블루투스를 통해 스마트폰에 연결하면 내장 마이크를 사용하여 핸즈프리 통화가 가능합니다.

  • 수신 전화를 받으려면 재생/일시정지 단추.
  • 통화를 종료하려면 재생/일시정지 버튼을 다시 누르세요.
  • 수신 전화를 거부하려면 재생/일시정지 단추.

유지

  • 부드럽고 마른 천으로 기기를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
  • 기기를 극한의 온도, 직사광선 또는 습기에 노출시키지 마세요.
  • 기기를 분해하지 마십시오. 분해할 경우 보증이 무효화됩니다.

문제 해결

문제가능한 원인 / 해결책
Cannot change from 24-hour (military) time.This device may only support 24-hour time format. There might not be an option to switch to 12-hour AM/PM format. Refer to the time setting instructions.
Slow charging or phone not charging wirelessly.Ensure your phone is Qi-enabled or has a compatible Qi receiver. Verify the phone is centered on the charging pad. Remove any thick phone cases. Ensure the alarm clock is powered by a sufficient adapter.
FM 라디오 수신이 좋지 않습니다.Relocate the device to an area with better signal. Ensure no large metal objects are near the device. The built-in antenna may have limited range in some environments.
Phone slides off the charging pad.The top surface may not be completely flat or may lack sufficient grip. Ensure the device is placed on a stable, level surface. Consider using a thin, non-slip mat if necessary.
스피커 음량이 작습니다.Increase the volume on both the alarm clock (using +/- buttons) and the connected Bluetooth device. Ensure the audio source is playing at an adequate level.
No snooze function.This model typically does not include a snooze feature. Pressing any button will silence the alarm until the next set time.

명세서

  • 모델 번호: WLGCLOCHGR-BK
  • 블루투스 버전: V4.2
  • 스피커 출력: 3W
  • 배터리: 1600mAh / DC 5V1A
  • 무선 충전기 출력: 5W
  • 감광도: 80dB +/- 2dB
  • 주파수 응답: 280Hz - 16KHz
  • 제품 크기: 5 x 4 x 3인치(12.7 x 10.16 x 7.62cm)
  • 품목 무게: 11.2 온스(317.5그램)
  • 색상: 검은색
  • 입력 Voltage: 120볼트(AC)

보증 및 지원

All Zeikos direct products come with a one-year warranty policy. For any support needs or inquiries, please contact the customer support team of Zeikos. They are committed to providing assistance to ensure customer satisfaction.

관련 문서 - WLGCLOCHGR-BK

사전view iHip FDAPP2BT-W 무선 블루투스 이어폰 사용 설명서 - 무선 기술 가이드
iHip FDAPP2BT-W 무선 블루투스 이어폰 사용 설명서입니다. 제품 사양, 사용 방법, 충전 방법, 안전 주의사항 및 FCC 규정 준수 정보가 포함되어 있습니다.
사전view SAM02 Wireless Charger FM Clock Radio with Bluetooth Speaker User Manual
Comprehensive user manual for the iHip SAM02 Wireless Charger FM Clock Radio with Bluetooth Speaker, covering setup, functions, specifications, and FCC compliance. Learn how to use wireless and wired charging, Bluetooth pairing, speaker playback, FM radio, and alarm settings.
사전view iHip Side Swipe 블루투스 헤드폰: 충전, 페어링 및 사용 방법 안내
iHip Side Swipe 블루투스 헤드폰의 충전, 전원 켜기, 모바일 기기(iOS 및 Android) 페어링, 아날로그 다이얼 및 스와이프 제스처를 통한 볼륨 조절, 음악 재생 및 통화 기능에 대한 종합 가이드입니다. 제품 특징 및 중요한 안전 정보도 포함되어 있습니다.
사전view iHip FDJAMBAR 블루투스 스피커 5B409BT 사용 설명서 및 지침
iHip FDJAMBAR 블루투스 스피커(모델 5B409BT)의 종합 사용 설명서입니다. 설정, 기능, 안전, 문제 해결 및 사양에 대해 알아보세요.
사전view iHip APP2-BT 무선 블루투스 이어폰 사용 설명서
iHip APP2-BT 무선 블루투스 이어폰의 사용 설명서에는 사양, 사용 방법, 충전 지침, 안전 주의 사항, FCC 규정 준수 및 보증 정보가 자세히 설명되어 있습니다.
사전view SoundPods 사용 설명서 - 지침 및 기능
SoundPods 무선 이어버드에 대한 포괄적인 사용 설명서로, 소개, 페어링, 통화 및 음악을 위한 Bluetooth 사용, 충전 지침, 사양, 기능 및 중요한 안전 정보에 대한 자세한 설명이 나와 있습니다.