Ryobi RVI18-0 18V ONE+ Cordless Volume Inflator

1. 안전 정보

본 공구를 사용하기 전에 모든 안전 경고 및 지침을 읽고 숙지하십시오. 경고 및 지침을 따르지 않을 경우 감전, 화재 및/또는 심각한 부상을 입을 수 있습니다.

• 전동 공구를 사용할 때는 항상 보안경을 착용하십시오.
• Do not operate the inflator in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating the inflator. Distractions can cause you to lose control.
• Do not expose the inflator to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Use the correct nozzle for the application. Forcing a nozzle into an incompatible valve can cause damage or injury.
• Do not block air vents during operation. This can cause the tool to overheat.

2. 제품 오버view

The Ryobi RVI18-0 18V ONE+ Cordless Volume Inflator is designed for high volume, low pressure inflation and deflation tasks. It is ideal for items such as air mattresses, pool toys, and other large inflatables. This bare tool operates with any Ryobi 18V ONE+ battery (sold separately).

The Ryobi RVI18-0 18V ONE+ Cordless Volume Inflator, shown with its ergonomic design and bright green and black casing.

주요 특징:

• High volume low pressure inflation and deflation capabilities.
• Pinch valve adaptor for pool toy inflation.
• Locking trigger feature to prevent user fatigue during extended use.
• Can be used as a portable sweeper for work surface clean up.

3. 설정

3.1 배터리 설치

1. 공기 주입기가 꺼져 있는지 확인하십시오.
2. 배터리의 돌출부를 공구의 배터리 포트에 있는 홈에 맞춰 정렬하십시오.
3. 배터리를 딸깍 소리가 나면서 제자리에 단단히 고정될 때까지 공구 안으로 밀어 넣으십시오.
4. To remove the battery, press the release latches on the sides of the battery and pull it out.

3.2 노즐 부착

1. Select the appropriate nozzle for your inflation or deflation task. The inflator comes with various attachments, including a pinch valve adaptor.
2. For inflation, firmly insert the chosen nozzle into the inflation port located at the front of the tool.
3. For deflation, firmly insert the chosen nozzle into the deflation port located at the top of the tool.
4. Ensure the nozzle is securely seated to prevent air leakage during operation.

4. 사용 설명서

4.1 인플레이션

1. Attach the desired nozzle to the inflation port.
2. 공기를 주입할 물체에 노즐을 삽입하십시오.
3. Press the trigger to start inflation. For continuous operation, engage the locking trigger feature by pressing the trigger fully and then pushing the lock button.
4. Monitor the inflation process to avoid over-inflation.
5. Release the trigger or disengage the lock button to stop.

Effortlessly inflate pool toys and small inflatable pools using the Ryobi RVI18-0 inflator, making setup quick and easy.

The Ryobi RVI18-0 inflator is ideal for quickly inflating air mattresses and other large inflatables during camp잉 여행.

4.2 디플레이션

1. Attach the desired nozzle to the deflation port.
2. 바람을 빼고 싶은 물건에 노즐을 삽입하세요.
3. Press the trigger to start deflation. The locking trigger feature can also be used for continuous deflation.
4. Allow the inflator to remove air until the item is sufficiently deflated.
5. Release the trigger or disengage the lock button to stop.

4.3 Using as a Portable Blower

The inflator can also be used to clear light debris from work surfaces. Simply use the inflation port without a nozzle or with a wide nozzle to direct airflow for cleaning.

Beyond inflation, the Ryobi RVI18-0 can function as a portable blower for clearing debris from work surfaces, such as sawdust from power tools.

5. 유지관리

5.1 청소

• Keep the tool's air vents clear of obstructions to ensure proper cooling.
• 도구 외부를 부드러운 천으로 닦으세요.amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• Periodically inspect nozzles for wear or damage and replace if necessary.

5.2 보관

• Store the inflator in a clean, dry place, out of reach of children.
• 장기간 보관할 경우 공구에서 배터리를 분리하십시오.
• Store nozzles and accessories in a dedicated bag or compartment to prevent loss.

6. 문제 해결

Problem: Inflator does not turn on.

• 해결책: 배터리가 완전히 충전되어 있고 공구에 올바르게 삽입되었는지 확인하십시오.
• 해결책: Check if the battery is compatible with the Ryobi 18V ONE+ system.

Problem: Low airflow or poor performance.

• 해결책: Verify that the correct nozzle is securely attached and not obstructed.
• 해결책: Check for any blockages in the air intake or output ports.
• 해결책: 배터리가 충분히 충전되었는지 확인하십시오.

Problem: Tool overheats.

• 해결책: Do not block the air vents during operation. Allow the tool to cool down before resuming use.
• 해결책: Avoid continuous operation for excessively long periods.

7. 사양

상세한 view of the Ryobi RVI18-0 inflator showing its compact dimensions for easy storage and portability.

8. 보증 및 지원

This Ryobi RVI18-0 18V ONE+ Cordless Volume Inflator comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty duration and coverage details.

고객 지원:

For technical assistance, troubleshooting, or warranty claims, please contact Ryobi customer service. Contact information can typically be found on the product packaging or the official Ryobi web대지.

온라인 지원: Visit the official Ryobi webFAQ, 제품 등록, 서비스 센터 위치에 대한 사이트입니다.

전화 지원: 해당 지역의 고객 서비스 전화번호는 제품 설명서를 참조하세요.