1. 서론
The Einhell CE-JS 18 Power Station Jump Starter is a compact and portable device designed to provide emergency jump-starting assistance for vehicles and serve as a portable power bank for various electronic devices. Equipped with a powerful lithium-polymer battery, it offers reliable performance for both automotive and personal charging needs. This manual provides essential information for safe and effective use, maintenance, and troubleshooting of your device.
2. 안전 지침
WARNING: Read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Always wear eye protection and protective gloves when working with batteries.
- Ensure adequate ventilation when jump-starting.
- Do not smoke or allow sparks or flames near the battery or jump starter.
- Connect the jumper cables with correct polarity: 빨간색(+) 긍정적으로, 검은 색 (-) to negative. Incorrect connection can cause damage or injury.
- 얼어붙은 배터리를 점프 시동하려고 시도하지 마십시오.
- 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
- 장치를 비나 습한 환경에 노출시키지 마십시오.
- Do not disassemble the unit. Contact qualified service personnel for repairs.
3. 패키지 내용
Carefully unpack the device and check for completeness. The package should contain the following items:
- Einhell CE-JS 18 Power Station Jump Starter Unit
- Jumper cables with insulated clamps 및 과부하 보호
- 230V power supply cable for charging the unit
- Protective and storage bag
- Various adapter cables for charging mobile devices (USB, 12V, 19V outputs)
Image: Einhell CE-JS 18 Jump Starter unit with all included accessories, including jumper cables, various charging adapters, and a power supply cable.
4. 제품 오버view
The Einhell CE-JS 18 is a versatile device featuring multiple functionalities:
- 점프 스타트 포트: For connecting the jumper cables to start a vehicle.
- LED 작업등: Integrated LED for illumination, strobe, and SOS signal functions.
- USB 출력: Two USB ports (5V/2A and 5V/9V fast charge) for charging smartphones, tablets, and other USB-powered devices.
- 12V/10A 출력: 12V 기기 전원 공급용.
- 19V/3.5A 출력: For charging laptops and other compatible devices.
- 배터리 상태 표시기: LEDs to show the remaining charge level of the internal battery.
이미지: 클로즈업 view of the Einhell CE-JS 18 unit, highlighting the integrated LED flashlight and the two USB output ports.
5. 설정
5.1 Charging the Jump Starter Unit
Before first use, fully charge the Einhell CE-JS 18 unit. It is recommended to fully charge the unit after each use and at least every three months to maintain battery health.
- Connect the provided 230V power supply cable to the charging input port on the jump starter.
- 전원 공급장치를 표준 벽면 콘센트에 꽂으세요.
- The battery status indicator LEDs will illuminate to show the charging progress.
- Charging typically takes approximately 6 hours for a full charge from empty. All indicator LEDs will be solid when fully charged.
- Once fully charged, disconnect the power supply cable from the unit and the wall outlet.
6. 사용 설명서
6.1 차량 점프 스타트
The CE-JS 18 is suitable for jump-starting petrol engines up to 8000 ccm and diesel engines up to 5000 ccm.
- Ensure the jump starter unit is sufficiently charged (at least 75% indicated by LEDs).
- 차량의 시동을 끄고 모든 부속 장치(조명, 라디오 등)를 끄십시오.
- 연결하다 빨간색(+) clamp of the jumper cable to the positive terminal of the vehicle's battery.
- 연결하다 검은 색 (-) clamp of the jumper cable to a solid, unpainted metal part of the vehicle's engine block or chassis, away from the battery and fuel lines.
- Plug the jumper cable connector into the jump start port on the Einhell CE-JS 18 unit.
- 차량 시동을 걸십시오. 시동이 즉시 걸리지 않으면 30초 정도 기다렸다가 다시 시도하십시오. 한 번에 3초 이상 시동을 걸려고 하지 마십시오.
- Once the vehicle starts, immediately disconnect the jumper cable connector from the Einhell unit.
- Then, disconnect the 검은 색 (-) clamp from the vehicle chassis, followed by the 빨간색(+) clamp 배터리 단자로부터.
Image: A person connecting the red positive jumper cable clamp to a car battery, with the Einhell CE-JS 18 unit placed nearby on the engine bay.
Image: A five-step diagram showing the correct sequence for connecting and disconnecting the jump starter to a vehicle battery.
6.2 모바일 기기 충전
The Einhell CE-JS 18 can charge various electronic devices using its USB, 12V, and 19V outputs.
- USB 충전: Use the appropriate USB cable (not always included) to connect your smartphone, tablet, or other USB device to either the 5V/2A or 5V/9V (fast charge) USB output port.
- 12V/10A 출력: Connect compatible 12V devices using the provided adapter cable.
- 19V/3.5A 출력: Connect compatible laptops or other devices using the provided adapter cable and appropriate tip.
Image: The Einhell CE-JS 18 unit connected to and charging a smartphone, tablet, and laptop, demonstrating its versatility as a power bank.
7. 유지관리
Proper maintenance ensures the longevity and optimal performance of your Einhell CE-JS 18.
- 청소: 부드럽고 마른 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 저장: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the unit is fully charged before storing for extended periods.
- 배터리 관리 : Recharge the unit every three months, even if not in use, to prevent deep discharge and prolong battery life.
8. 문제 해결
If you encounter issues with your Einhell CE-JS 18, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 차량이 시동되지 않음 | Low charge on jump starter; Incorrect cable connection; Vehicle battery completely dead; Engine size exceeds capacity. | Recharge the jump starter; Check polarity and connection points; Allow more time for charging or seek professional assistance; Verify engine size compatibility. |
| Mobile device not charging | Low charge on jump starter; Incorrect cable/adapter; Device not compatible. | Recharge the jump starter; Ensure correct cable and adapter are used; Check device compatibility with output voltag에스. |
| LED 조명이 작동하지 않음 | Low charge on jump starter; Malfunction. | Recharge the jump starter; If problem persists, contact customer support. |
If the problem persists after attempting these solutions, please contact Einhell customer support.
9. 사양
Detailed technical specifications for the Einhell CE-JS 18 Power Station Jump Starter:
- 모델: CE-JS 18
- 제조업체: 아인헬
- 배터리 유형: 리튬폴리머
- 배터리 용량: 3 x 6000 mAh (Total 18000 mAh)
- 점프 스타트 Voltage: 12V(XNUMXV)
- 피크 전류 : 600아
- 현재 시작: 300 A (for 5 seconds)
- 충전 시간: 약 6시간
- USB 출력 1 : 5V / 2A
- USB 출력 2 : 5 V / 9 V (Fast Charge)
- DC 출력 1: 12V / 10A
- DC 출력 2: 19V / 3.5A
- 무게: 1.34kg
- 치수(길이 x 너비 x 높이): 24.3 x 9.2 x 3cm
- Suitable for Petrol Engines: Up to 8000 ccm
- Suitable for Diesel Engines: Up to 5000 ccm
- 부품 번호: 1091531
10. 보증 및 지원
Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by the manufacturer's warranty, typically 1 year for parts availability, as per local regulations and purchase terms.
For warranty claims, technical support, or spare parts, please contact your authorized Einhell dealer or visit the official Einhell website for customer service contact information. Please have your proof of purchase and the product model number (CE-JS 18) ready when contacting support.
You can find more information and support at the official Einhell store: 아인헬 스토어
