소개
This user manual provides essential information for the proper use, maintenance, and care of your SOLAS WR007 Impeller Wrench. Please read this manual thoroughly before using the tool to ensure safe and effective operation.
제품 끝view
The SOLAS WR007 Impeller Wrench is a specialized tool designed for the removal and installation of impellers on personal watercraft (PWC) and jet boats. Its robust construction ensures durability and reliable performance for marine applications.
Image: The SOLAS WR007 Impeller Wrench, a black, robust tool with a hexagonal base and four prongs at the top designed to engage with an impeller nut.
설정
Before using the impeller wrench, ensure you have the correct size wrench for your specific impeller nut. The WR007 is designed for standard SOLAS impeller nuts. Always work in a well-lit area and ensure the personal watercraft or jet boat is securely supported and powered off.
필요한 도구(포함되지 않음):
- Appropriate torque wrench (for installation)
- Impeller removal tool (if impeller is seized)
- Marine grease or anti-seize compound
- 보안경 및 장갑
작동 지침
Impeller Removal:
- Ensure the watercraft is stable and the engine is off.
- Locate the impeller and the impeller nut at the rear of the jet pump.
- Carefully align the four prongs of the SOLAS WR007 Impeller Wrench with the corresponding slots on the impeller nut.
- Apply firm, steady pressure and turn the wrench counter-clockwise to loosen the impeller nut. If the nut is seized, use penetrating oil and allow it to soak.
- Once loosened, remove the impeller nut and then the impeller.
Impeller Installation:
- Clean the impeller shaft and apply a thin layer of marine grease or anti-seize compound to the threads.
- Carefully thread the impeller onto the shaft by hand until it is snug.
- Place the SOLAS WR007 Impeller Wrench onto the impeller nut, ensuring proper engagement of the prongs.
- Using a torque wrench (if specified by the watercraft manufacturer), tighten the impeller nut clockwise to the recommended torque specifications. Do not overtighten.
- Verify that the impeller spins freely without obstruction.
유지
The SOLAS WR007 Impeller Wrench requires minimal maintenance. After each use:
- Clean the wrench with a damp cloth to remove any dirt, grease, or marine residue.
- Dry the wrench thoroughly to prevent corrosion.
- Store the wrench in a dry place, away from direct sunlight and extreme temperatures.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Wrench slips on impeller nut | Incorrect wrench size; Worn impeller nut; Improper engagement | Ensure WR007 is the correct size for your impeller nut. Verify prongs are fully seated in slots. Inspect impeller nut for wear. |
| Impeller nut is seized | Corrosion; Overtightening | Apply penetrating oil and allow to soak. Use an impact wrench with caution if necessary, or consult a professional. |
명세서
- 모델: SOLAS WR007
- 부품 번호: 2-WPS-19-2007
- 무게: 약 1파운드
- 재료: Durable metal alloy
- 애플리케이션: Designed for SOLAS impellers on personal watercraft and jet boats.
보증 정보
SOLAS products are manufactured to high standards. For specific warranty details regarding the WR007 Impeller Wrench, please refer to the official SOLAS web해당 웹사이트를 방문하거나 고객 지원팀에 문의하십시오. 구매 영수증을 보관하여 구매 증빙 자료로 활용하십시오.
고객 지원
For further assistance, technical questions, or to report issues, please contact SOLAS customer support through their official channels. Visit the SOLAS web연락처 정보와 자주 묻는 질문은 사이트에서 확인하세요.
