JONATHAN Y JYL7203A Integrated LED Pendant Light

1. 서론

This manual provides essential information for the safe installation, operation, and maintenance of your JONATHAN Y JYL7203A Integrated LED Pendant Light. Please read these instructions thoroughly before beginning installation or use, and retain them for future reference.

The JYL7203A is a modern pendant light featuring a single hoop design with a matte black finish, suspended by three wires. It incorporates an integrated LED light source, providing balanced brightness and warmth. This fixture is designed for various indoor settings, including kitchen islands, dining rooms, and living areas.

2. 안전 정보

경고: 화재, 감전 또는 부상의 위험을 줄이려면 항상 다음과 같은 기본 안전 수칙을 준수하십시오.

• 전문 설치 권장: This fixture must be hardwired. For safety and proper function, professional installation by a qualified electrician is strongly recommended.
• 전원 분리: Always disconnect power at the main circuit breaker or fuse box before installation, servicing, or cleaning the fixture.
• 접지: 감전 사고를 방지하기 위해 조명 기구가 제대로 접지되었는지 확인하십시오.
• 권tage: This fixture is designed for 120-volt electrical systems. Verify your power supply matches this requirement.
• 통합 LED: The LED light source is integrated and not replaceable. Do not attempt to disassemble or replace the LED components.
• 조심스럽게 다루십시오: Avoid bending or pulling wires during installation. Do not use the fixture if any part is damaged.
• 실내에서만 사용 가능: This product is intended for indoor use in dry locations. It is not water resistant.

3. 패키지 내용

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the fixture. Contact customer support for assistance.

• Integrated LED Pendant Light Fixture (1)
• 장착 하드웨어(나사, 전선 너트 등)
• 사용 설명서(본 문서)

4. 설정 및 설치

Follow these steps for proper installation. It is recommended to have a second person assist during installation to hold the lamp in place when wiring.

4.1 사전 설치

1. 전원 끄기: 회로 차단기 또는 퓨즈 박스를 찾아 조명 기구가 설치될 접속함으로 가는 전원을 차단하십시오.
2. 풀다: 포장에서 모든 내용물을 조심스럽게 꺼냅니다.
3. Review 도표: Familiarize yourself with the fixture components and the installation diagram.

4.2 고정물 장착

The fixture is designed to be compatible with sloped ceilings and features adjustable height.

그림 1: 이상view of the JYL7203A pendant light features, including adjustable height and dimmer compatibility.

1. 장착 브래킷 부착: 제공된 나사를 사용하여 장착 브래킷을 천장의 접속함에 고정하십시오.
2. 높이 조정: The fixture's height is adjustable. The three suspension wires can be pulled through the canopy to achieve the desired hanging length. Ensure the fixture is level before tightening the wire grips.
3. 배선: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
4. 안전한 캐노피: Carefully push the canopy up to the ceiling, covering the junction box, and secure it with the provided screws.

Figure 2: Detail of the ceiling canopy and adjustable suspension wires.

4.3 설치 후

1. 복원력 : 설치가 완료되고 모든 연결이 안전하게 이루어지면 주 회로 차단기에서 전원을 다시 켜십시오.
2. 테스트 기능: 전등 스위치를 켜서 조명이 제대로 작동하는지 확인하십시오.

5. 사용 설명서

The JYL7203A pendant light features an integrated LED and is designed for simple operation.

5.1 켜기/끄기

Operate the light using a standard wall switch. The fixture is designed to be compatible with an on/off wall switch.

5.2 디밍 기능

This fixture is dimmer compatible. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed on your wall. The light output can be adjusted from 0% to 100% brightness.

Figure 3: Visual representation of the dimming capability from low to high settings.

5.3 통합 LED

The light source is an integrated LED, providing efficient and long-lasting illumination. No bulb replacement is necessary for this fixture.

Figure 4: Detail of the integrated LED light strip within the hoop design.

6. 유지관리

펜던트 조명의 외관과 기능을 유지하려면 다음의 간단한 관리 지침을 따르십시오.

• 청소: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe down the fixture. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
• 점검: 모든 연결부와 장착 하드웨어가 안전하게 유지되는지 주기적으로 점검하세요.
• 전구 교체 없음: As the LED is integrated, there are no bulbs to replace.

7. 문제 해결

펜던트 조명에 문제가 발생하면 다음의 일반적인 문제 해결 단계를 참조하십시오.

• 불이 켜지지 않습니다:
  • 회로 차단기에서 전원이 켜져 있는지 확인하십시오.
  • 벽 스위치가 '켜짐' 위치에 있는지 확인하십시오.
  • 모든 와이어 연결이 안전한지 확인하십시오.
• 조명이 예기치 않게 깜빡이거나 어두워집니다.
  • Ensure you are using an LED-compatible dimmer switch if dimming functionality is desired.
  • 느슨한 전선 연결을 확인하십시오.
• Uneven Light Output or Shadows:
  • The light is emitted from the inner ring. Consider the placement and other ambient light sources in the room.

이러한 조치를 취해도 문제가 해결되지 않으면 고객 지원 센터 또는 자격을 갖춘 전기 기술자에게 문의하십시오.

8. 사양

9. 보증 및 지원

9.1 보증 정보

This product comes with a 30-day manufacturer warranty covering defects only. Normal wear and tear is not warranted. Visible damages not noted upon delivery will be determined to be customer damage and will not be warranted. All products are inspected upon arrival, and worn, dirty, or stained merchandise will not be accepted for warranty claims.

9.2 고객 지원

For warranty information or any product-related inquiries, please contact the internet customer service center. Refer to your purchase documentation for specific contact details.

10. 제품 비디오

Watch this official product video for a closer look at the JONATHAN Y JYL7203A Integrated LED Pendant Light.