MaxxHaul 50025 Hitch Mount 2-Bike Rack Instruction Manual

제품 끝view

Our MaxxHaul Hitch Mount 2-Bike Rack is designed for secure transportation of up to two bicycles on vehicles equipped with a receiver hitch. It is compatible with vans, SUVs, pickup trucks, and sedans. The rack features improved bike cradles and buckle-type straps for firm securing, an all-steel hitch adapter for 1-1/4" or 2" hitch receivers, and a built-in locking knob to minimize wobble during transport. It supports a maximum distributed weight of 100 lbs.

중요한 안전 정보

경고: 이 지침을 따르지 않을 경우 심각한 부상이나 재산 피해가 발생할 수 있습니다.

• 사용하기 전에 모든 볼트와 너트가 단단히 조여졌는지 항상 확인하십시오.
• Do not exceed the maximum capacity of 100 lbs total, or 50 lbs per bike.
• Ensure bikes are securely strapped down to prevent movement and rubbing against each other or the vehicle.
• Avoid using this bike rack on RVs, trailers, or fifth-wheels due to increased bouncing, swaying, and stress.
• Always use additional tie-downs and straps for added safety during transport.
• Wear ANSI approved safety goggles during assembly and installation.

포함된 부품

조립하기 전에 모든 구성품이 있는지 확인하십시오.

• 1 x Hitch Mounted 2-Bike Rack (Main Frame, Tilt Frame, Rack Arms)
• Hitch Adapter (for 1-1/4" or 2" receivers)
• Bolts, Washers, and Lock Nuts (various sizes for assembly)
• 래치 핀
• 잠금 노브
• Rubber Bike Cradles with Buckle Straps
• Padded Column (yellow foam)
• 반사 스티커

설정 및 설치

Follow these steps carefully for proper assembly and installation.

1. Attach Tilt Frame to Vehicle Hitch Receiver:
   • Slide the Hitch End of the Tilt Frame into your vehicle's hitch receiver. If your vehicle has a 1-1/4" hitch receiver, ensure the 2" adapter is removed.
   • Insert the main bolt (often a threaded bolt) through the hitch receiver and the tilt frame.
   • Securely tighten this bolt using a wrench until it is snug and the rack is stable. This is crucial to prevent wobbling.
   

   Image: The MaxxHaul bike rack's hitch connection, showing the bolt that secures it to the vehicle's receiver. Proper tightening is essential for stability.

   Video: Official MaxxHaul video demonstrating the installation of the bike rack into a vehicle's hitch receiver, highlighting the tightening process for stability.
2. Attach Main Frame to Tilt Frame:
   • Connect the upper end of the Tilt Frame to the Main Frame using the Latch Pin. Ensure it is securely inserted.
   

   Image: The fully assembled MaxxHaul bike rack, showing its upright position and the connection points between the main frame and tilt frame.

3. Attach Rack Arms:
   • Attach each Rack Arm to the upper end of the Main Frame using the provided bolts, washers, and lock nuts.
   • Tighten these bolts securely.
   

   이미지: 클로즈업 view of the adjustable ABS and Nylon straps on the bike rack arms, designed to secure bicycles.

4. Secure Main Upright:
   • Tighten the built-in locking knob on the main upright to minimize wobble during transport.
   

   Image: The bike rack in its tilted position, demonstrating the rotary knob used to minimize vibration and allow trunk access.

Operating the Bike Rack

자전거 적재 중

1. Ensure the bike rack is securely installed and stable.
2. Place the first bicycle onto the rack arms, ensuring the frame rests on the rubber cradles.
3. Secure the bicycle using the buckle-type straps provided. Pull down tightly for a firm connection.
4. If loading two bikes, position the second bike facing the opposite direction to optimize space and prevent rubbing.
5. Use additional straps or bungee cords to secure bicycle wheels and frames to prevent movement, especially during long trips or on rough terrain.

Image: Two bicycles mounted on the MaxxHaul rack, illustrating how they are positioned for transport.

Accessing Vehicle Rear (Tilt Function)

The bike rack features a tilt function to allow access to your vehicle's rear hatch without completely removing the rack.

1. Remove the Latch Pin (if installed) that connects the Main Frame to the Tilt Frame.
2. Carefully swing the rack downwards to access the rear of your vehicle.
3. Once done, swing the rack back up and re-insert the Latch Pin to secure it in the upright position.

Image: The bike rack in its tilted position, demonstrating the rotary knob used to minimize vibration and allow trunk access.

유지

• Periodically check the condition of the bike rack and the vehicle's hitch receiver for any wear or damage. Replace any damaged components immediately.
• Keep the rack clean and free of debris.
• Store the bike rack indoors when not in use to prolong its lifespan.

문제 해결

Rack Wobbles Excessively

If the bike rack wobbles excessively during transport, ensure the following:

• The main bolt securing the rack to the vehicle's hitch receiver is tightened sufficiently. Use a proper wrench for maximum tightness.
• The built-in locking knob on the main upright is fully tightened to reduce play.
• Ensure the Latch Pin is fully inserted and secured.

Video: Official MaxxHaul video demonstrating the installation and tightening of the bike rack, which helps prevent wobbling.

Difficulty Tightening Bolts

Some bolts, especially those with a sealant, may require more force or specific tools (like a socket wrench) to tighten properly. The included wrench may not provide sufficient leverage for all users.

Video: A user demonstrating the need for proper tools to tighten the bolts on the bike rack, especially those with sealant.

명세서

보증 및 지원

For warranty information or technical support, please refer to the official MaxxHaul website or contact their customer service directly. A user manual PDF is available for download 여기.