스카이 바이퍼 18378

스카이 바이퍼 퓨리 스턴트 드론 사용자 설명서

모델: 18378

1. 서론

This manual provides essential instructions for the safe operation, setup, and maintenance of your Sky Viper Fury Stunt Drone. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage or injury.

2. 상자 안에 무엇이 들어있나요?

모든 구성품을 조심스럽게 꺼내어 다음 항목들이 모두 들어 있는지 확인하십시오.

  • Sky Viper Fury Stunt Drone
  • 3.7V 650mAh 리튬 폴리머 배터리 (드론용)
  • 제어 장치
  • One Set of Extra Blade Guards
  • 충전 케이블
  • 나사 4개
  • 드라이버
  • 사용 설명서(본 문서)
Sky Viper Fury Stunt Drone, controller, and packaging

Image 2.1: Contents of the Sky Viper Fury Stunt Drone package, including the drone, controller, and retail box.

3. 설정

3.1 배터리 설치 및 충전

  1. 드론 배터리 : Insert the included 3.7V 650mAh lithium polymer battery into the drone's battery compartment. Ensure it is securely connected.
  2. 컨트롤러 배터리: The controller requires 3 AAA batteries (not included). Open the battery compartment on the back of the controller, insert the batteries according to the polarity indicators, and close the compartment.
  3. 드론 배터리 충전: Connect the drone's battery to the charging cable, then connect the charging cable to a USB power source. The charging indicator will show the charging status. Allow approximately 60-90 minutes for a full charge.

3.2 Propeller and Blade Guard Installation

The drone comes with pre-installed propellers. If replacement is needed or if you wish to install blade guards:

  • 블레이드 가드: Attach the included blade guards to the drone's arms using the provided screws and screwdriver. Ensure they are firmly secured to protect the propellers during flight.
  • 프로펠러 교체: If a propeller is damaged, carefully remove it and replace it with a new one from a spare set (if available). Ensure the correct propeller type (A or B) is installed on the corresponding motor.
Sky Viper Fury Stunt Drone and controller close-up

이미지 3.1: 클로즈업 view of the Sky Viper Fury Stunt Drone and its controller, showing details of the drone's structure.

4. 사용 설명서

4.1 전원 켜기 및 페어링

  1. Turn on the drone by pressing the power button. The LED lights will begin to flash.
  2. Turn on the controller. The controller's indicator light will flash.
  3. Move the left joystick (throttle) fully up, then fully down. The drone and controller lights will become solid, indicating successful pairing.

4.2 교정

For stable flight, calibrate the drone before each flight or if it drifts. Place the drone on a flat, level surface. Refer to the quick start guide for specific calibration stick commands, typically involving holding both joysticks to a specific corner.

4.3 기본 비행 제어

The Sky Viper Fury Stunt Drone features Surface Scan Technology and improved auto-hover for simplified flight control.

  • Launch/Land Button: Press this button for automatic takeoff and landing.
  • 왼쪽 조이스틱(스로틀/요): 고도(위/아래)와 회전(좌/우)을 제어합니다.
  • 오른쪽 조이스틱(피치/롤): Controls forward/backward movement (pitch) and left/right strafing (roll).
Sky Viper Fury Stunt Drone features diagram

Image 4.1: Diagram illustrating the Sky Viper Fury Stunt Drone's features, including 360-degree flips, one-touch stunts, and auto-pilot stag에스.

4.4 Surface Scan Technology and Auto-Hover

The drone utilizes Surface Scan technology for enhanced stability. A tiny camera sensor on the underside tracks and analyzes surface patterns at nearly 200 times per second. This optical flow process, combined with a built-in barometer, allows the drone to maintain its position and hover with ease, making it simpler to fly in any horizontal direction using a single stick.

Diagram explaining Surface Scan Optical Ground Tracking

Image 4.2: Visual explanation of Surface Scan Optical Ground Tracking, showing how the drone uses a sensor to maintain position hold.

4.5 One-Touch Stunts

The Sky Viper Fury Stunt Drone is capable of performing eight visually impressive one-touch stunts. To activate a stunt, press the dedicated stunt button on the controller and then move the right joystick in the desired direction (e.g., forward for a front flip, left for a barrel roll).

4.6 Dual Flight Modes

The drone offers two flight modes:

  • 일반 모드: Provides stable and forgiving flight characteristics, ideal for beginners and indoor use.
  • 스포츠 모드: Increases responsiveness and speed, suitable for experienced pilots and outdoor flying.

Switch between modes using the 'NORMAL/SPORT' button on the controller.

5. 유지관리

5.1 프로펠러 관리

  • Regularly inspect propellers for cracks, bends, or damage. Replace any damaged propellers immediately to ensure stable flight.
  • Ensure propellers are clean and free from debris (hair, dust, grass) that could impede rotation.

5.2 배터리 관리 및 보관

  • 반드시 제공된 충전 케이블을 사용하십시오.
  • 배터리를 과충전하거나 완전히 방전시키지 마십시오.
  • 직사광선이나 극한의 온도를 피하고 서늘하고 건조한 곳에 배터리를 보관하십시오.
  • 장기간 보관할 경우 배터리를 약 50% 용량까지 충전하세요.

5.3 일반 청소

Use a soft, dry cloth to clean the drone and controller. Avoid using harsh chemicals or solvents. Do not immerse the drone or controller in water.

6. 문제 해결

문제가능한 원인해결책
드론의 전원이 켜지지 않습니다.Drone battery is not charged or not connected.드론 배터리를 완전히 충전하고 제대로 연결되었는지 확인하십시오.
컨트롤러의 전원이 켜지지 않습니다.Controller batteries are dead or incorrectly installed.Replace AAA batteries in the controller, ensuring correct polarity.
드론이 컨트롤러와 페어링되지 않습니다.페어링 순서가 올바르지 않았습니다.Ensure both drone and controller are on, then perform the joystick up/down pairing sequence.
Drone drifts or flies erratically.Drone not calibrated; damaged propellers; strong wind (outdoor).Perform calibration on a flat surface. Inspect and replace damaged propellers. Avoid flying in windy conditions.
짧은 비행 시간.배터리가 완전히 충전되지 않았습니다. 배터리가 노후되었습니다.Ensure battery is fully charged. Consider replacing the battery if it's old and capacity has diminished.
Stunts not performing correctly.Insufficient altitude; incorrect button sequence.Ensure drone has enough altitude (at least 6-10 feet). Press stunt button then immediately move joystick in desired direction.

7. 사양

  • 상표: 스카이 바이퍼
  • 모델 이름: Sky Viper FURY Stunt Drone
  • 모델 번호: 18378
  • 색상: 블랙 / 그린
  • 제품 크기: 13.5인치 길이 x 3인치 너비 x 11.5인치 높이
  • 품목 무게: 1파운드(16온스)
  • 재료: 플라스틱
  • 배터리: 3.7V 650mAh 리튬 폴리머 배터리(포함)
  • 컨트롤러 배터리: AAA 3개(포함되지 않음)
  • 연결 기술 : 와이파이
  • 제어 유형: 원격 제어
  • 스킬 레벨 : 초보자
  • 제조업체 권장 연령: 12세 이상
  • 광학 센서 기술: CMOS (for Surface Scan)
  • 한국어: 816322019435, 810017183784
  • 제조업체: Skyrocket
  • 출시일: 21년 2023월 XNUMX일

8. 보증 및 지원

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Sky Viper website. The manufacturer, Skyrocket, typically provides details regarding product warranties and service options.

A digital version of this user manual may also be available for download from the manufacturer's support page or via this direct link: Sky Viper Fury Stunt Drone User Manual (PDF)

관련 문서 - 18378

사전view 스카이 바이퍼 타입 R 퍼포먼스 레이싱 드론 사용자 설명서
스카이 바이퍼 타입 R 퍼포먼스 레이싱 드론의 작동에 대한 종합 가이드로, 설정, 비행 제어, 비행 모드, 문제 해결 및 안전 수칙을 포함합니다.
사전view 스카이 바이퍼 01599 스턴트 드론 비행 가이드
Sky Viper 01599 스턴트 드론에 대한 포괄적인 비행 가이드로, 설정, 비행 제어, 기본 기동, 고급 스턴트, 문제 해결, 배터리 관리 및 안전 예방 조치 등을 다룹니다.
사전view Sky Viper Vista HD 비디오 드론: 사용 설명서 및 작동 가이드
Sky Viper Vista HD 비디오 드론을 조작하는 데 필요한 종합 가이드입니다. 설정, 비행 제어, 비행 모드, 비디오 스트리밍 및 안전 예방 조치를 다룹니다. 조종기 페어링, 이륙, 착륙 및 드론 스턴트 수행 방법을 알아보세요.
사전view 스카이 바이퍼 벡터 드론: 초기 설정 및 유지 관리 가이드
스카이 바이퍼 벡터 드론의 설치, 유지 관리 및 비행에 대한 종합 가이드입니다. 배터리 충전, 랜딩 기어 설치, 프로펠러 교체, 문제 해결 및 비행 제어에 대한 내용이 포함되어 있습니다.
사전view Sky Viper Dash Nano 드론: 설치, 비행 및 안전 가이드
Sky Viper Dash Nano 드론의 설치, 비행 및 유지 관리에 대한 종합 가이드입니다. 비행 모드, 조종법, 스턴트, 배터리 관리 및 안전 예방 조치에 대해 알아보세요.
사전view 스카이 바이퍼 노바 FX 라이트 디스플레이 드론 사용자 설명서 및 가이드
스카이 바이퍼 노바 FX 라이트 디스플레이 드론의 설치, 비행 제어, 색상 변형 로터, 묘기, 문제 해결 및 안전 수칙을 모두 다룬 종합 사용자 설명서입니다.