Kidde 화재 경보 발신기 사용 설명서

1. 소개 및 이상view

This manual provides essential information for the proper installation, operation, and maintenance of the Kidde K-278B-1120 Fire Alarm Pull Station. This device is designed to manually initiate a fire alarm signal within a conventional fire alarm system.

The Kidde K-278B-1120 is a double-action, key-reset pull station featuring a red finish and designed for wall mounting. It is intended for use with 24V DC/125V AC conventional fire alarm systems.

2. 안전 정보

중요 안전 지침:

Installation of this fire alarm pull station should only be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
Always disconnect power to the fire alarm control panel before performing any installation, maintenance, or troubleshooting.
Do not paint over the pull station or obstruct its operation in any way.
Regular testing of the fire alarm system, including pull stations, is crucial for ensuring proper functionality. Refer to local fire codes for testing frequency.
This device is part of a life safety system. Any malfunction or damage must be addressed immediately by a qualified technician.

3. 구성 요소

The Kidde K-278B-1120 Fire Alarm Pull Station consists of the following primary components:

Red Housing: The main body of the pull station, designed for visibility.
활성화 핸들: The mechanism labeled "PULL FOR FIRE" that is pulled to activate the alarm.
Lift Cover: The upper part of the handle mechanism, labeled "LIFT THEN PULL HANDLE," which must be lifted before the handle can be pulled.
Key Reset Mechanism: A key-operated lock used to reset the pull station after activation.
전기 단자: Located inside the housing for connection to the fire alarm control panel wiring.

Red Kidde Fire Alarm Pull Station with 'LIFT THEN PULL HANDLE' and 'PULL FOR FIRE' text — 이 이미지는 앞면을 표시합니다. view of the Kidde Fire Alarm Pull Station, highlighting its red finish and the clear instructions for activation: "LIFT THEN PULL HANDLE" and "PULL FOR FIRE". The Kidde logo is visible at the bottom.

4. 설정 및 설치

The Kidde K-278B-1120 Fire Alarm Pull Station is designed for wall mounting and integration into conventional fire alarm systems. Professional installation is highly recommended to ensure compliance with safety standards and proper system functionality.

4.1. 설치 전 점검

Verify that the fire alarm control panel is compatible with a 24V DC or 125V AC manual pull station.
Ensure the installation location meets local fire code requirements for visibility and accessibility.
Confirm all necessary wiring and conduit are in place.

4.2. 장착

Turn off all power to the fire alarm control panel.
Mount the pull station securely to a standard electrical box or directly to the wall using appropriate fasteners. Ensure it is level and firmly attached.
Route the system wiring into the pull station's housing.

4.3. 배선

Connect the fire alarm circuit wiring to the designated terminals inside the pull station. Refer to the wiring diagram provided with your fire alarm control panel and the pull station's internal labels for correct polarity and connections.
모든 연결이 안전하고 절연되어 있는지 확인하십시오.
Close the pull station housing carefully after wiring is complete.

4.4. Post-Installation Test

After installation, power up the fire alarm control panel and perform a functional test of the pull station according to the fire alarm system's testing procedures. This typically involves activating the pull station and verifying that the alarm signal is received by the control panel and annunciated.

5. 운영

The Kidde K-278B-1120 is a double-action pull station, requiring two distinct movements to activate the alarm.

5.1. 경보 작동시키기

In the event of a fire or emergency requiring alarm activation, 승강기 the upper cover of the pull station, which is labeled "LIFT THEN PULL HANDLE".
Once the cover is lifted, 풀다운 the handle labeled "PULL FOR FIRE" firmly.
This action will send an alarm signal to the connected fire alarm control panel, initiating the building's fire alarm sequence.

5.2. Resetting the Pull Station

After activation, the pull station must be reset using its key to return it to its normal, non-alarm state.

Insert the provided reset key into the keyhole on the side or front of the pull station.
Turn the key as indicated (usually a quarter turn) to release the activated handle.
Return the handle to its original, upright position.
Remove the key. The pull station is now reset and ready for future use.

6. 유지관리

Regular maintenance ensures the reliability and longevity of your fire alarm pull station.

시각적 검사: 물리적 손상의 징후가 있는지 풀 스테이션을 주기적으로 검사하십시오.ampering, or obstruction. Ensure the "LIFT THEN PULL HANDLE" and "PULL FOR FIRE" labels are clear and legible.
청소: Gently wipe the exterior of the pull station with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
기능 테스트: Conduct periodic functional tests as required by local fire codes and the fire alarm system manufacturer's recommendations. This typically involves activating the pull station and verifying the alarm, then resetting it.
핵심 관리: Keep the reset key in a secure, accessible location known only to authorized personnel.

7. 문제 해결

If you encounter issues with your Kidde K-278B-1120 Fire Alarm Pull Station, consider the following:

문제	가능한 원인	해결책
풀 스테이션에서 경보가 작동하지 않습니다.	Improper wiring; Faulty pull station; Issue with fire alarm control panel.	Verify wiring connections. Test with a multimeter if qualified. Contact a qualified fire alarm technician for inspection and repair.
풀 스테이션을 재설정할 수 없습니다.	Incorrect key; Damaged reset mechanism; Obstruction.	Ensure the correct key is used. Check for any physical obstructions. If mechanism is damaged, contact a qualified technician for replacement.
Alarm activates without pulling the handle.	Faulty pull station; Wiring short; Issue with fire alarm control panel.	Immediately contact a qualified fire alarm technician to diagnose and resolve the issue. This indicates a critical system fault.

For any issues that cannot be resolved with the above steps, or for any concerns regarding the fire alarm system, always contact a qualified fire alarm system technician.

8. 사양

기인하다	세부 사항
모델 번호	K-278B-1120
상표	키드
색상	빨간색
활성화 유형	Double Action (Lift then Pull)
리셋 유형	키 재설정
장착 유형	벽면 장착
치수(대략적)	Length: 3 9/16 in (9.05 cm) Height: 5 3/16 in (13.18 cm) Depth: 3 5/8 in (9.21 cm)
무게	0.8 온스(약 22.7그램)
호환성	24V DC / 125V AC Conventional Fire Alarm Systems
습도 범위	최대 95% RH(비응축)

9. 보증 및 지원

For specific warranty information regarding your Kidde K-278B-1120 Fire Alarm Pull Station, please refer to the documentation included with your purchase or contact Kidde directly. Warranty terms may vary based on region and purchase date.

For technical support, product inquiries, or to locate authorized service providers, please visit the official Kidde web사이트 또는 고객 서비스 부서에 문의하십시오.

You can find more information about Kidde products by visiting the Kidde Store on Amazon.

	Kidde Firex 시리즈 연기 및 일산화탄소 경보기: 제품 가이드, 청소 및 문제 해결 Kidde Firex 시리즈 연기 및 일산화탄소 경보기에 대한 종합 가이드 (제품 정보 포함)viewKidde Fire 21033081과 같은 모델의 청소 방법, 시각/청각 표시기 및 문제 해결 단계를 안내합니다.
	무선 기능이 있는 Kidde 2SFWR 광학 연기 경보기 - 기술 사양 무선 연결 및 충전식 리튬 배터리 백업 기능을 갖춘 주전원 공급 장치인 Kidde 2SFWR 광학 연기 감지기의 자세한 기술 사양 및 기능입니다. 설치, 안전 기준 및 성능에 대한 정보가 포함되어 있습니다.
	Kidde Cavius 화재 경보 컨트롤러 9101 사용자 안내서 Kidde Cavius 화재 경보 컨트롤러(모델 9101)에 대한 사용자 가이드입니다. 상호 연결된 무선 연기 및 열 경보기의 기능, 설치, 작동, 테스트 및 문제 해결에 대한 정보를 제공합니다.
	Módulo Endereçável de Saída Kidde SmartOne (AO) - Especificações Técnicas e Instalação Informações detalhadas sobre o Módulo Endereçável de Saída (AO) SmartOne da Kidde, incluindo características gerais, guia de instalação, especificações técnicas e conexões elétricas para sistemas de detecção de incêndio.
	Kidde 연기 경보기 사용 설명서: i12020ACA, i12040ACA, P12040CA 모델 설치, 작동 및 안전 이 사용 설명서는 Kidde i12020ACA, i12040ACA, P12040CA 연기 경보기의 설치, 작동 및 유지 관리에 대한 자세한 지침을 제공합니다. 최적의 가정 보호를 위해 권장되는 설치 위치, 배선, 테스트 절차, 화재 안전 수칙 및 보증 정보를 알아보세요.
	Kidde P4010ACSCO-WF 스마트 기능을 갖춘 연기 및 일산화탄소 경보기 Kidde P4010ACSCO-WF 제품 데이터 시트는 스마트 기능, 원격 알림, 10년 배터리 백업 기능을 갖춘 Wi-Fi 지원 2-in-1 연기 및 일산화탄소 경보기입니다. 기술 사양, 기능 및 중요 안전 정보가 포함되어 있습니다.

Kidde K-278B-1120