Codelocks BH-5000/BB

사용 설명서

Codelocks Battery Holder for CL5000

Model: BH-5000/BB

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of the Codelocks Battery Holder, specifically designed for use with the CL5000 series products. Please read this manual thoroughly before proceeding with installation or use to ensure optimal performance and longevity of the product.

2. 제품 오버view 및 기능

The Codelocks Battery Holder (Model BH-5000/BB) is a robust accessory designed to securely house batteries for the CL5000 series. Its construction ensures durability and reliable power delivery.

Various Codelocks battery holders, including single, double, and quad cell configurations, with wires and connectors.

Image 1: Assortment of Codelocks Battery Holders. This image displays several configurations of the battery holder, including single-cell, dual-cell, and quad-cell designs, each equipped with connecting wires and plugs for integration with compatible devices.

주요 특징:

  • 호환성: Specifically designed for use with Codelocks CL5000 series.
  • 재료: Constructed from durable Zinc/Aluminium for enhanced longevity.
  • 마치다: Features a protective powder-coated finish.
  • 내후성: Designed to be weather resistant, suitable for various environments.
  • 설치: Includes necessary mounting hardware for secure installation.

3. 상자 안에 무엇이 들어있나요?

포장을 풀 때 모든 구성품이 들어 있는지 확인하세요.

  • Codelocks Battery Holder (Model BH-5000/BB)
  • 장착 하드웨어
  • Door (as specified by manufacturer)

Note: The "Door" component refers to a specific part included by the manufacturer for the CL5000 system, which the battery holder integrates with.

4. 설정 및 설치

Follow these steps for proper installation of the battery holder:

  1. 설치 영역 준비: Ensure the mounting surface is clean, dry, and suitable for securing the battery holder.
  2. 배터리 삽입: Open the battery compartment of the holder. Insert the required batteries (not included) according to the polarity markings (+ and -) inside the holder. Ensure a snug fit.
  3. 홀더 위치: Place the battery holder in the desired location, ensuring its wires can reach the CL5000 unit without strain.
  4. 안전한 장착: Use the provided mounting hardware to securely fasten the battery holder to the surface. Avoid over-tightening screws to prevent damage.
  5. Connect to CL5000: Carefully connect the battery holder's wiring harness to the corresponding port on your Codelocks CL5000 unit. Ensure the connection is firm and correct. Refer to your CL5000 manual for specific wiring diagrams if necessary.
  6. 테스트 기능: After installation, test the CL5000 unit to confirm it is receiving power from the newly installed battery holder.

5. 운영

The Codelocks Battery Holder operates passively by supplying power to the connected CL5000 unit. Once batteries are correctly installed and the holder is connected, it will continuously provide power until the batteries are depleted.

  • 배터리 삽입: 배터리를 삽입할 때는 항상 극성을 올바르게 맞춰주세요.
  • 전원 공급 장치: The holder acts as a power source for the CL5000. No user interaction is required for its operation beyond initial setup and battery replacement.

6. 유지관리

Regular maintenance ensures the longevity and reliable performance of your battery holder:

  • 청소: Periodically wipe the exterior of the battery holder with a dry, soft cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
  • 배터리 교체: Replace batteries as needed, typically when the CL5000 unit indicates low power. Always replace all batteries simultaneously with new ones of the same type and voltage.
  • 연결 확인: Occasionally inspect the wiring and connections for any signs of wear, corrosion, or looseness. Ensure all connections remain secure.
  • 환경 보호: While weather resistant, avoid prolonged exposure to extreme conditions or direct water immersion.

7. 문제 해결

If you encounter issues with your battery holder, consider the following common solutions:

문제가능한 원인해결책
CL5000 not powering on.
  • 배터리가 소진되었거나 배터리가 부족합니다.
  • 배터리가 잘못 삽입되었습니다.
  • Loose connection to CL5000.
  • Faulty battery holder.
  • 모든 배터리를 새 배터리로 교체하십시오.
  • 배터리 극성을 확인하고 올바르게 다시 삽입하세요.
  • Ensure the wiring harness is securely connected to the CL5000.
  • Contact Codelocks support if other solutions fail.
Intermittent power to CL5000.
  • Loose battery contacts.
  • 손상된 배선.
  • 배터리가 단단히 고정되어 있는지 확인하세요.
  • Inspect wiring for cuts or fraying; replace if damaged.

8. 사양

  • 모델 번호: BH-5000/BB
  • 제품 크기: 2.5 x 1.9 x 1.1 인치
  • 무게: 약 1파운드(배터리 제외)
  • 재료: Zinc/Aluminium
  • 마치다: 파우더 코팅
  • 호환성: Codelocks CL5000 series
  • 제조업체: 코드락

9. 보증 및 지원

For warranty information, technical support, or to purchase replacement parts, please contact Codelocks directly through their official website or customer service channels. Retain your proof of purchase for warranty claims.

Codelocks contact information can typically be found on their official web사이트 또는 제품 포장.

관련 문서 - BH-5000/BB

사전view 코드락 CL5000 시리즈 설치 가이드
Comprehensive installation instructions for Codelocks CL5000 series digital door locks, including models CL4010, CL5010, CL5010BB, CL4020, and CL5020. Covers box contents, tools required, operations check, special fixing notes, functions, and detailed installation steps for various models.
사전view CL5000 - 미국 버전 설치 지침
코드락 CL5000 전자 도어록(미국 버전)의 종합 설치 가이드입니다. 구성품, 필요한 도구, 작동 점검, 특별 고정 참고 사항, CL5210 잠금 장치의 단계별 설치 절차가 포함되어 있습니다.
사전view 코드락 CL4000 프로그래밍 및 작동 지침
코드락 CL4000 전자 잠금 장치의 프로그래밍 및 작동에 대한 종합 가이드로, 코드 기본 사항, 작동 지침, 배터리 관리 및 키 우회 기능을 다룹니다.
사전view Codelocks CL160 기계식 잠금 장치 설치 가이드
Codelocks CL160 기계식 키패드 잠금장치에 대한 단계별 설치 지침에는 필요한 도구, 설치 지침, 안전하고 적절한 설치를 위한 특별 참고 사항이 포함되어 있습니다.
사전view CL100/CL200 - 2018 표면 데드볼트 설치 지침
구성 요소 식별부터 키퍼 장착까지 모든 단계를 다루는 Codelocks CL100/CL200 2018 표면 데드볼트에 대한 포괄적인 설치 가이드입니다.
사전view Codelocks KL1100 키패드 설치 지침
Codelocks KL1100 키패드 잠금장치에 대한 단계별 설치 가이드에는 상자 내용물, 설치 다이어그램, 템플릿 지침이 포함되어 있습니다.