GREENCUT GLM770XE Gasoline Lawn Mower User Manual

1. 서론

Thank you for choosing the GREENCUT GLM770XE self-propelled gasoline lawn mower. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new lawn mower. Please read this manual thoroughly before using the product and keep it for future reference. Proper use and maintenance will ensure optimal performance and extend the lifespan of your equipment.

2. 안전 지침

Always follow these safety guidelines to prevent injury and damage to the equipment.

• 매뉴얼을 읽어보세요: 잔디깎이 기계를 작동하기 전에 모든 조작법과 올바른 사용법을 숙지하십시오.
• 개인 보호 장비: 튼튼한 신발, 긴 바지, 보안경을 항상 착용하십시오. 움직이는 부품에 걸릴 수 있는 헐렁한 옷은 피하십시오.
• 지역 지우기: Before mowing, remove all objects such as stones, sticks, wires, bones, and other debris from the lawn that could be thrown by the blade.
• 주변 사람들을 멀리하세요: Ensure children, pets, and other people are at a safe distance (at least 15 meters) from the mowing area.
• 연료 취급: Handle gasoline with extreme care. It is highly flammable. Refuel outdoors only, and do not smoke while refueling. Allow the engine to cool before adding fuel.
• 엔진 꺼짐: 조정, 청소 또는 유지 보수를 하기 전에 항상 엔진을 끄고 점화 플러그 배선을 분리하십시오.
• 슬로프 작업: 경사면에서 잔디를 깎을 때는 극도로 주의해야 합니다. 경사면의 면을 가로질러 깎아야 하며, 절대로 위아래로 깎아서는 안 됩니다. 지나치게 가파른 경사면은 피해야 합니다.
• 블레이드 안전: Never place hands or feet near rotating parts. The blade continues to rotate for a short period after the engine is switched off.
• 유지: Regularly inspect the mower for damage, especially the blade. Replace worn or damaged parts with genuine GREENCUT replacements.

3. 구성 요소 이상view

The GREENCUT GLM770XE lawn mower consists of several key components designed for efficient lawn care.

그림 1: 전반적인 view of the GREENCUT GLM770XE gasoline lawn mower, highlighting its main structure including the engine, cutting deck, wheels, and handle.

• 엔진: 150cc 6hp 4-stroke OHV engine with air cooling.
• 절단 데크: Durable steel chassis housing the 460mm double-edged blade.
• 핸들바: Foldable V-Grip handlebar with integrated controls for speed, engine revolutions, and safety brake.
• 전기 시동 버튼: For convenient engine ignition.
• 바퀴: Rigid rim wheels with shielded bearings for smooth movement. Front wheels 175mm, Rear wheels 250mm.
• Grass Collector: 55-liter capacity grass bag with a rigid cover and full basket indicator.
• 절단 높이 조정: Lever for adjusting cutting height in 7 positions (25-75mm).
• 4-in-1 시스템: Includes options for bagging, mulching, side ejection, and rear ejection.

그림 2: Close-up showing the electric start button on the handlebar and an illustration of the 4 collection options (bagging, rear, side, mulching).

그림 3: View of the 460mm sharp, double-edged, sharpenable blade located under the cutting deck.

4. 설정

4.1. 조립

1. 핸들바 어셈블리: Unfold the handlebar and secure it in place using the provided knobs or bolts. Ensure all cables are routed correctly and not pinched.
2. 잔디 수집기 조립체: Assemble the grass bag according to the instructions and attach it to the rear of the mower.
3. 연결 확인: Verify that all connections, especially the spark plug wire and safety levers, are securely in place.

4.2. 연료 및 오일

The engine is shipped without oil or fuel. It is critical to add both before starting the mower.

그림 4: Close-up of the engine area, showing the oil fill cap/dipstick and the fuel tank cap. Always ensure correct fluid levels before operation.

1. 엔진 오일 추가: Remove the oil fill cap/dipstick. Slowly pour the recommended 4-stroke engine oil (e.g., SAE 30 or 10W-30) into the oil fill opening until it reaches the 'FULL' mark on the dipstick. Do not overfill.
2. 연료 추가: Fill the fuel tank with fresh, unleaded gasoline. Do not use E85 or E15 fuel. Leave some space for fuel expansion. Securely replace the fuel cap.

4.3. Battery Charging (for Electric Start)

If your model includes an electric start, ensure the battery is charged before first use. Refer to the separate battery charger instructions for details. Connect the charger to the battery and a power outlet until fully charged.

5. 사용 설명서

5.1. 엔진 시동

1. 프라임(해당되는 경우): If your engine has a primer bulb, press it 3-5 times until fuel is visible.
2. 초크: 초크 레버를 'CHOKE' 위치로 옮깁니다(냉간 시동의 경우).
3. Safety Lever: Hold the engine safety lever (bail bar) against the handlebar.
4. 전기 시동: 엔진이 시동될 때까지 전기 시동 버튼을 길게 누르십시오. 엔진이 작동되면 버튼에서 손을 떼십시오.
5. 수동 시작: If electric start is not available or battery is low, pull the recoil starter handle firmly and smoothly until the engine starts.
6. 워밍업: 엔진 시동이 걸리면 엔진이 예열되는 동안 초크 레버를 서서히 'RUN' 위치로 옮기십시오.

5.2. 엔진 정지

Release the engine safety lever (bail bar). The engine will automatically shut off.

5.3. 절단 높이 조정

The GREENCUT GLM770XE offers 7 cutting height positions, ranging from 25mm to 75mm.

그림 5: The lever for easy adjustment of the 7 cutting height positions, located near the wheels.

1. Ensure the engine is OFF and the spark plug wire is disconnected.
2. Locate the height adjustment lever on each wheel or a central lever.
3. Pull the lever outwards and move it to the desired height setting. Ensure all wheels are set to the same height.

5.4. 예초 기술

For best results, mow when the grass is dry. Overlap cutting swaths slightly. For very tall grass, it is recommended to make two passes, setting the cutting height higher for the first pass and then lowering it for the second.

그림 6: A user demonstrating easy handling of the self-propelled lawn mower on a lawn, illustrating typical operation.

5.5. Grass Collection and Discharge

The GLM770XE features a 4-in-1 system for grass management:

• 포장: Attach the 55L grass collector to gather clippings. The full basket indicator will show when it needs emptying.
• 멀칭: Insert the mulching plug (if included) to finely chop grass clippings and return them to the lawn as natural fertilizer.
• Side Ejection: Attach the side discharge chute to eject clippings to the side.
• Rear Ejection: Remove the grass collector and mulching plug for rear discharge.

그림 7: Detail of the full basket indicator on the grass collector and the rear ejection option.

6. 유지관리

Regular maintenance is crucial for the longevity and safe operation of your lawn mower. Always ensure the engine is off and the spark plug wire is disconnected before performing any maintenance.

6.1. 사용 후

• 갑판을 청소하세요: Remove grass clippings and debris from the underside of the cutting deck.
• Empty Grass Bag: Empty and clean the grass collector.
• 블레이드 검사: Check the blade for damage, dullness, or looseness.

6.2. 예정된 유지 관리

• 엔진 오일 교환: Change the engine oil after the first 5 hours of operation, then every 25 hours or annually.
• 에어 필터: 공기 필터는 25시간마다 청소하거나 교체하십시오. 먼지가 많은 환경에서는 더 자주 청소하거나 교체하는 것이 좋습니다.
• 점화 플러그: Inspect and clean the spark plug every 50 hours or annually. Replace if necessary.
• 칼날 연마/교체: Sharpen the blade as needed, or replace it if it is bent, cracked, or severely damaged. Always ensure the blade is balanced after sharpening.
• 일반 검사: Check all nuts, bolts, and screws for tightness. Inspect fuel lines for cracks or leaks.

6.3. 보관

For long-term storage (over 30 days), prepare the mower as follows:

• Drain the fuel tank or add a fuel stabilizer. Run the engine until it stops to consume all fuel in the carburetor.
• 엔진 오일을 교체하세요.
• 잔디깎이 기계 전체를 꼼꼼하게 청소하세요.
• Store in a clean, dry area, away from direct sunlight and extreme temperatures.

7. 문제 해결

이 섹션에서는 잔디깎이 사용 중 발생할 수 있는 일반적인 문제에 대해 설명합니다.

8. 사양

Key technical specifications for the GREENCUT GLM770XE lawn mower.

그림 8: Visual representation of the lawn mower's dimensions and key performance features like power, cutting width, cutting height, and grass bag capacity.

9. 보증 및 지원

Your GREENCUT GLM770XE lawn mower is designed for durability and performance. For warranty information, please refer to the warranty card included with your product or visit the official GREENCUT web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

For technical support, spare parts, or service inquiries, please contact GREENCUT customer service through the contact information provided on the official web사이트 또는 소매점.