1. 서론
The Audibax Orlando 162 Plus is a professional PAR light designed for various lighting applications. It features 54 x 3W RGB 3-in-1 LEDs, offering a wide range of color mixing capabilities. This device supports DMX control, automatic programs, sound-activated modes, and master/slave operation, making it suitable for stage lighting, events, and architectural illumination. This manual provides essential information for safe operation, setup, and maintenance.
2. 안전 정보
- 전기 안전: Always connect the device to a grounded power outlet. Ensure the voltage matches the device's requirements (AC90-240V, 50/60Hz). Disconnect power before cleaning or servicing.
- 놓기: Install the fixture in a well-ventilated area, away from heat sources and flammable materials. Ensure stable mounting to prevent accidental falls.
- 손질: Avoid direct eye exposure to the light source. Do not operate the device if the power cord is damaged. Do not attempt to repair the device yourself; refer servicing to qualified personnel.
- 환경: 본 제품은 실내 전용입니다. 습기와 극한 온도로부터 보호하십시오.
3. 패키지 내용
포장을 풀 때 모든 품목이 있는지 확인하세요.
- Audibax Orlando 162 Plus PAR Light
- 장착 브래킷
- 전원 케이블
- 사용자 설명서
4. 제품 오버view
The Audibax Orlando 162 Plus features a robust aluminum housing and an adjustable mounting bracket for versatile positioning.
그림 4.1: 전면 view of the Audibax Orlando 162 Plus PAR light, showcasing the 54 RGB LEDs illuminated in green.
그림 4.2: 측면 view of the PAR light, illustrating the adjustable mounting bracket for flexible installation.
제어판 및 연결
The rear panel provides access to the control interface and input/output connections.
그림 4.3: 후면 view of the PAR light, detailing the DMX IN/OUT ports, power input, digital display, and control buttons (MENU, UP, DOWN, ENTER).
- 디지털 디스플레이: Shows current mode and parameter settings.
- 메뉴 버튼: 메인 메뉴 옵션을 탐색합니다.
- 위/아래 버튼: Adjust parameter values or navigate menu items.
- 입력 버튼: 선택 사항을 확인합니다.
- DMX 입력/출력: 3-pin XLR connectors for DMX signal connection.
- 전원: IEC power input for connecting the power cable.
5. 설정
5.1 장착
- Attach the mounting bracket securely to the fixture using the provided screws.
- Mount the fixture to a truss, ceiling, or stand using appropriate clamps and safety cables (not included). Ensure the mounting surface can support the weight of the fixture.
- Adjust the angle of the fixture using the bracket's locking knobs.
5.2 전원 연결
- Connect the supplied power cable to the POWER IN socket on the rear of the fixture.
- Plug the other end of the power cable into a suitable grounded power outlet.
5.3 DMX 연결(선택 사항)
For DMX control, connect a DMX controller to the DMX IN port of the first fixture. Use DMX OUT to connect to the DMX IN of the next fixture in a daisy chain configuration.
- Use standard 3-pin XLR DMX cables.
- Ensure the DMX chain is terminated with a 120-ohm resistor at the last fixture for optimal signal integrity.
6. 사용 설명서
Use the MENU, UP, DOWN, and ENTER buttons on the rear panel to navigate and select operating modes and parameters.
6.1 메뉴 탐색
- 누르다 메뉴 to cycle through the main menu options (e.g., DMX Address, Auto Mode, Sound Mode, Master/Slave).
- 사용 UP 그리고 아래에 값을 조정하거나 메뉴 내에서 하위 옵션을 선택할 수 있습니다.
- 누르다 입력하다 to confirm your selection or save changes.
6.2 작동 모드
The Orlando 162 Plus offers several operational modes:
- DMX 모드: Allows external control via a DMX controller. Set the DMX address using the menu. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX protocol sheet) for specific control functions.
- 자동 모드 : The fixture runs through pre-programmed light shows automatically. Various auto programs may be available; use UP/DOWN to select.
- 소리 활성화 모드: The light patterns and changes respond to ambient sound detected by the built-in microphone. Adjust sensitivity if available.
- 마스터/슬레이브 모드: Connect multiple Orlando 162 Plus fixtures. Set one unit as 'Master' and others as 'Slave'. The slave units will synchronize their operation with the master unit.
- 정적 색상 모드: Select a fixed color. The 3-in-1 RGB LEDs allow for a wide spectrum of colors.
- 스트로브 기능: Activates a flashing light effect. This can often be adjusted for speed.
6.3 Color Examp레
7. 유지관리
- 청소: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and unplugged before cleaning.
- 점검: Periodically check power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
- 저장: 사용하지 않을 때는 조명 기구를 건조하고 먼지 없는 곳에 보관하십시오.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명기구가 켜지지 않습니다. | 전원 공급이 안 됩니다. 케이블에 결함이 있습니다. | Check power cable connection; verify power outlet; try a different cable. |
| 빛 출력이 없습니다. | Incorrect mode selected; DMX signal issue. | Ensure fixture is in an active mode (Auto, Sound, DMX with active signal); check DMX connections and address. |
| DMX 제어가 작동하지 않습니다. | Incorrect DMX address; faulty DMX cable; no DMX terminator. | Verify DMX address matches controller; check DMX cable integrity; ensure DMX terminator is used on the last fixture. |
| 조명이 깜빡거리거나 불규칙적으로 작동합니다. | Unstable power supply; DMX signal interference. | Ensure stable power source; check DMX cable quality and connections; use a DMX terminator. |
9. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | 10132061 |
| 광원 | 54 x 3W RGB 3-in-1 LEDs |
| 전력 소비 | 162 와트 |
| 입력 Voltage | AC90-240V, 50/60Hz |
| 제어 모드 | DMX, Auto, Sound-Activated, Master/Slave, Static Color, Strobe |
| DMX 채널 | Varies by mode (refer to DMX protocol sheet) |
| 재료 | 알루미늄 하우징 |
| 색상 | 검은색 |
| 치수(패키지) | 24.5 x 21.5 x 21.5cm |
| 무게(제품) | 2.1kg |
10. 보증 및 지원
Audibax products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact Audibax customer support. For technical assistance or service inquiries, please visit the official Audibax web사이트를 방문하거나 현지 대리점에 문의하십시오.
