JBL PRV-175-MS6510

JBL PRV-175 해양용 스테레오 리시버 및 6.5인치 스피커 사용 설명서

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your JBL PRV-175 Marine Gauge Hole Mount USB Bluetooth AM/FM Digital Stereo Receiver and accompanying 6.5" 2-Way Marine Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage.

안전 정보

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

메모: Speaker mounting hardware and speaker wire are typically not included and must be purchased separately.

설정 및 설치

Receiver Installation (JBL PRV-175)

The PRV-175 receiver is designed for marine gauge-style mounting, fitting into a standard tachometer opening.

  1. 장착 위치를 선택하세요: Select a flat, secure surface on your boat's dashboard or console that can accommodate the receiver's dimensions and provides adequate clearance for wiring.
  2. 장착 구멍을 뚫으세요: Using a suitable hole saw, cut a circular opening of approximately 3 inches (76mm) in diameter. Refer to the included template for precise measurements.
  3. 배선: Connect the power, ground, speaker outputs, and auxiliary inputs/outputs according to the wiring diagram provided with the unit. Ensure all connections are secure and waterproof.
  4. 수신기를 장착하십시오: Insert the receiver into the opening. Secure it from the rear using the supplied U-bracket, nuts, and washers. Tighten until snug, but do not overtighten.
JBL PRV-175 Marine Stereo Receiver front view

영상: 앞쪽 view of the JBL PRV-175 Marine Stereo Receiver, showing the display and control buttons. This unit is designed for gauge-style mounting.

Speaker Installation (6.5" Marine Speakers)

The 6.5" marine speakers are designed for flush mounting in suitable locations on your boat.

  1. 장착 위치 선택: Choose locations that provide optimal sound dispersion and are structurally sound. Ensure there is sufficient depth behind the mounting surface for the speaker magnet.
  2. Cut Speaker Openings: Carefully cut circular openings for the speakers, typically around 5.6 inches (142mm) in diameter. Refer to the speaker's template for exact dimensions.
  3. 스피커선 연결: Run speaker wires from the receiver to each speaker location. Connect the positive (+) and negative (-) terminals of the speaker to the corresponding wires from the receiver. Ensure correct polarity for optimal sound.
  4. 스피커 장착: Place the speakers into the openings and secure them using appropriate marine-grade screws (not included) through the mounting holes on the speaker frame.
JBL 6.5 inch Marine Speaker front view

영상: 앞쪽 view of a JBL 6.5-inch Marine Speaker with a chrome grille. These speakers are designed for flush mounting in marine environments.

작동 지침

전원 켜기/끄기

볼륨 조절

소스 선택

AM/FM 라디오 작동

블루투스 오디오 스트리밍

USB 재생

보조 입력

유지

문제 해결

문제가능한 원인해결책
장치에 전원이 공급되지 않습니다Blown fuse; improper wiring; battery disconnectedCheck and replace fuse; verify power and ground connections; ensure battery is connected.
스피커에서 소리가 나지 않음Incorrect source selected; speaker wires disconnected; volume too low; amplifier 문제Select correct source; check speaker wire connections; increase volume; consult technician if amplifier is suspected.
블루투스가 연결되지 않습니다Unit not in BT MUSIC mode; device not in pairing mode; interferenceEnsure receiver is in BT MUSIC mode; put device in pairing mode; move device closer to receiver; try re-pairing.
USB가 재생되지 않음호환되지 않음 file format; USB drive not recognized; unit not in USB mode보장하다 files are compatible (e.g., MP3); try a different USB drive; select USB mode.

명세서

JBL PRV-175 Marine Receiver

6.5" Marine Speakers

일반적인

보증 및 지원

For warranty information and technical support, please refer to the warranty card included with your product or visit the official JBL website. You may also contact JBL customer service directly for assistance with product operation, troubleshooting, or parts.