소개
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your FLIR K45 High Performance Thermal Imaging Camera. The FLIR K45 is designed to provide clear thermal images in challenging environments, aiding in navigation and decision-making.
Figure 1: FLIR K45 Thermal Imaging Camera in operation, showing a thermal view.
안전 정보
Always read and understand all safety warnings and instructions before operating the FLIR K45 camera. Failure to do so may result in injury or damage to the device.
- Do not expose the camera to temperatures exceeding its operational limits (up to 500°F for 5 minutes).
- Ensure the battery is properly charged and installed before use.
- Avoid direct exposure of the lens to extreme heat sources when not in use for thermal imaging.
- The device is water resistant (IP67), but avoid prolonged submersion.
제품 구성 요소
The FLIR K45 package includes the following items:
- FLIR K45 Thermal Imaging Camera
- 리튬 이온 배터리(포함)
- Charging dock (if applicable, based on image)
- USB 케이블
- 전원 어댑터
- 선적 서류 비치
그림 2: 전면 view of the FLIR K45 camera, showing the screen and control buttons.
그림 3: 전면 view of the FLIR K45, highlighting the thermal lens.
설정
1. 배터리 충전
The FLIR K45 uses a Lithium Ion battery. Before first use, fully charge the battery. Connect the camera to the charging dock or directly via the USB cable to a power adapter.
Figure 4: FLIR K45 in its charging dock. Camera not included with charger.
2. 배터리 삽입
Locate the battery compartment, typically at the base of the handle. Insert the charged Lithium Ion battery, ensuring it clicks into place securely.
3. 초기 전원 켜기
Press and hold the power button (green button) to turn on the device. The 4-inch screen will illuminate, displaying the FLIR logo followed by the thermal image feed.
작동 지침
1. 기본 동작
Point the camera towards the area of interest. The thermal image will be displayed on the 4-inch screen. The K45 provides a crisp, 240 x 180 pixel thermal image, enhanced by FSX™ Flexible Scene Enhancement for improved detail.
그림 5: 예ample of a thermal image captured by the FLIR K45, indicating temperature variations.
2. 이미지 모드
The FLIR K45 offers several image modes to optimize viewing for different scenarios. Use the mode selection button (often indicated by a plus/minus or menu icon) to cycle through these options:
- IR image: Standard infrared thermal view.
- TI Basic fire-fighting mode: Optimized for general firefighting scenarios.
- Black-and-white fire-fighting mode: Provides a high-contrast monochrome thermal view.
- Fire mode: Specific mode for fire scene analysis.
- Search-and-rescue mode: Enhances visibility for locating individuals.
- Heat detection mode: Highlights areas of significant heat.
- Thumbnail gallery: 다시 허용view of saved images.
Figure 6: Detail of the FLIR K45 control buttons for navigation and mode selection.
3. 이미지 캡처
To capture a thermal image, press the designated capture button (refer to the device's physical buttons, often a trigger or a specific button on the control panel). Images are saved to the internal memory or an inserted SD card.
유지
1. 카메라 청소
Regularly clean the camera body with a damp cloth. For the lens, use a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive cleaners or solvents.
2. 배터리 관리
To prolong battery life, avoid fully discharging the battery frequently. Store the camera and battery in a cool, dry place when not in use for extended periods.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 카메라의 전원이 켜지지 않습니다. | 배터리가 부족하거나 방전되었습니다. | 배터리를 완전히 충전하십시오. |
| 이미지가 흐릿하거나 불분명합니다. | Dirty lens; extreme temperature difference. | Clean the lens; allow camera to acclimate to environment. |
| 이미지를 저장할 수 없습니다. | Memory full or no SD card inserted. | Delete old images or insert a compatible SD card. |
여기에 나열되지 않은 문제가 발생하는 경우, 추가 지원을 받으려면 지원 섹션을 참조하십시오.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | FLIR K45 |
| 열분해능 | 240 x 180 픽셀 |
| 화면 크기 | 4인치(11cm) |
| 정확성 | ±4°C (±7.2°F) or ±4% of reading (for ambient 10°C to 35°C) |
| 내구성 | Withstands 2-meter drop, IP67 water resistant |
| 작동 온도 | Fully operational up to 500°F (5 minutes) |
| 배터리 유형 | 1개의 리튬 이온 배터리(포함) |
| 제품 치수 | 4.7 x 4.9 x 11 인치 |
| 품목 무게 | 1 파운드 |
| 미디어 유형 | SD 카드 |
보증 정보
The FLIR K45 camera is protected by FLIR's 2-5-10 Warranty:
- 2년 배터리용.
- 5년 카메라 때문에.
- 10년 탐지기의 경우.
For detailed warranty terms and conditions, please refer to the official FLIR web사이트를 방문하거나 고객 지원팀에 문의하세요.
고객 지원
For technical assistance, service, or additional information regarding your FLIR K45 Thermal Imaging Camera, please contact FLIR customer support or visit the official FLIR web대지.
또한 방문할 수 있습니다 FLIR Store on Amazon 제품 정보 및 리소스를 확인하세요.
제품 비디오
이 설명서에 삽입하기 위해 사용 가능한 데이터에는 판매자가 제공한 공식 제품 비디오가 없습니다.
