소개
This manual provides detailed instructions for the assembly, operation, and maintenance of your Displays2go Tablet Floor Stand with Locking Enclosure, model IPEVRFLBK2. This versatile stand is designed to securely display tablets in both floor-standing and countertop configurations, featuring a robust locking mechanism and integrated cable management. Please read these instructions carefully before assembly and use to ensure proper functionality and safety.
안전 정보
- 불안정성을 방지하기 위해 조립하는 동안 모든 구성 요소가 단단히 고정되어 있는지 확인하세요.
- Do not exceed the recommended weight capacity for the tablet enclosure.
- Place the stand on a stable, level surface to avoid tipping.
- Keep keys for the locking enclosure in a safe place.
- Route cables carefully to prevent tripping hazards.
패키지 내용
Please verify that all the following components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- 베이스 플레이트
- Main Support Pole (for floor stand)
- Short Support Arm (for countertop stand)
- 태블릿 케이스
- 장착 하드웨어(나사, 와셔, 육각 렌치)
- Set of Keys for Enclosure Lock
- Foam Padding Inserts for Tablet
조립 설명서
1. Floor Stand Assembly
- Attach the Main Support Pole to the Base Plate: Align the bottom of the main support pole with the designated holes on the base plate. Secure it using the provided screws and Allen wrench. Ensure it is tightened firmly.
- Attach the Tablet Enclosure to the Main Support Pole: Position the tablet enclosure onto the top of the main support pole. Align the mounting holes and secure with the appropriate screws. The enclosure should be able to tilt and rotate once attached.
The fully assembled Displays2go Tablet Floor Stand in its upright configuration, showcasing a tablet securely housed within the locking enclosure.
This image displays the rear of the tablet enclosure and the connection point to the stand's pole, illustrating the mounting mechanism.
2. Countertop Stand Assembly
- Attach the Short Support Arm to the Base Plate: If converting from a floor stand, remove the main support pole. Align the short support arm with the designated holes on the base plate and secure it using the provided screws and Allen wrench.
- Attach the Tablet Enclosure to the Short Support Arm: Position the tablet enclosure onto the top of the short support arm. Align the mounting holes and secure with the appropriate screws.
The tablet stand configured for countertop use, with a tablet displayed in the enclosure, highlighting its compact form.
This image shows the back of the tablet enclosure when configured for countertop use, detailing its attachment to the shorter base.
3. 태블릿 삽입
- Unlock the Enclosure: Use the provided key to unlock the tablet enclosure. The front panel will open.
- Apply Foam Padding: Place the appropriate foam padding inserts inside the enclosure to ensure a snug and secure fit for your specific tablet model.
- 태블릿 삽입: Carefully place your tablet into the enclosure, ensuring it sits flush against the padding.
- 닫기 및 잠금: Close the front panel of the enclosure and turn the key to lock it securely. Remove the key.
4. 케이블 관리
The stand features integrated cable management to keep charging cables tidy and out of sight.
- Route Cable Through Enclosure: If your tablet requires charging while in the stand, feed the charging cable through the designated opening in the tablet enclosure.
- Guide Cable Down the Pole: Carefully guide the cable down the interior or exterior channel of the support pole.
- Exit Through Base: Route the cable out through the opening in the base plate to connect to a power source.
자세한 view of the base of the stand, illustrating the integrated cable management channel designed to route charging cables discreetly.
Operating the Tablet Stand
조정 View잉 각도
The tablet enclosure can be tilted and rotated to achieve optimal viewing angles. Gently adjust the enclosure to your desired position. Avoid excessive force.
잠금 및 잠금 해제
To secure your tablet, ensure the enclosure is closed and use the provided key to turn the lock mechanism. To access the tablet, insert the key and turn to unlock, then open the front panel.
유지
- 청소: Wipe the stand and enclosure with a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying. Avoid abrasive cleaners.
- 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 키 케어: Keep the keys clean and dry. Do not force the key if it feels stiff; apply a small amount of graphite lubricant if needed.
문제 해결
- 스탠드가 흔들린다: Ensure all assembly screws are fully tightened. Verify the stand is on a flat, stable surface.
- 태블릿이 맞지 않습니다: Check that the correct foam padding inserts are used for your tablet model. Ensure the tablet is aligned properly before closing the enclosure.
- Lock Mechanism is Stiff: Apply a small amount of graphite lubricant to the keyhole. Ensure the key is fully inserted and turned gently.
- Cables Not Routing Properly: Ensure cables are not kinked or obstructed within the pole or base channels.
명세서
| 특징 | 세부 사항 |
|---|---|
| Product Dimensions (Floor Stand) | 15 x 12 x 48.5 인치 |
| 품목 무게 | 12파운드 |
| 재료 | 강철 및 알루미늄 |
| 색상 | 검은색 |
| 장착 유형 | 바닥 장착, 테이블탑 |
| 호환 장치 | Apple iPad 2 (and similarly sized tablets) |
보증 및 지원
This product is covered by the standard manufacturer's warranty. For warranty claims, technical support, or replacement parts, please contact Displays2go customer service. Refer to your purchase documentation for specific warranty terms and contact information.
Displays2go Customer Service: Please visit the official Displays2go website or refer to your product packaging for current contact details.
