1. 이상view
The AEMC INSTRUMENTS Model 6255 is a high-precision Micro-Ohmmeter designed for accurate resistance measurements. It is capable of measuring resistance from 0.1 microhm up to 2500 ohms, with a resolution of 0.1 microhm. This device is suitable for a wide range of industrial and scientific applications requiring precise low-resistance measurements.
Key features include an LCD display, an output current range of 0.1A to 10A, and internal data storage for up to 1500 test results. It is powered by an 8.5Ah NiMH battery, ensuring portability and extended operation.
2. 안전 정보
Before operating the AEMC Model 6255, please read and understand all safety instructions. Failure to comply with these instructions may result in electric shock, fire, or damage to the instrument.
- 사용하기 전에 항상 기기가 제대로 작동하는지 확인하세요.
- Do not use the instrument if it appears damaged or if the insulation on test leads is compromised.
- 모든 지역 및 국가 안전 규정을 준수하세요.
- The instrument is rated IEC/EN 61010-1 CAT III 50V Pol 2. Adhere to these safety categories during operation.
- Do not attempt to measure resistance on live circuits unless specifically designed and rated for such applications.
- Use only accessories and test leads supplied or recommended by AEMC INSTRUMENTS.
- Keep the instrument dry and clean. Avoid exposure to extreme temperatures or humidity.
3. 제품 구성품 및 특징
The AEMC Model 6255 Micro-Ohmmeter comes with the following items:
- AEMC INSTRUMENTS 6255 Micro Ohm Meter
- Necessary test leads (not explicitly listed in "whats_in_the_box" but implied for operation)
- Power adapter/charger (for NiMH battery)
- 사용 설명서 (본 문서)
Figure 1: AEMC INSTRUMENTS Model 6255 Micro-Ohmmeter.The image displays the AEMC Model 6255 Micro-Ohmmeter housed within its robust yellow protective case, which is shown open. The device itself is yellow and black, featuring a clear LCD display that shows "72.6" and "0.1365 mΩ". To the left of the display are red and black input terminals labeled C1, P1, P2, and C2. Below the display are several control buttons. On the right side, there is a large rotary dial and a yellow START/STOP button. The overall design emphasizes durability and ease of use for industrial applications.
주요 구성 요소:
- LCD 디스플레이: Provides clear readings of resistance values, current, and other operational parameters.
- Input Terminals (C1, P1, P2, C2): For connecting test leads to the circuit under test. These are typically used for 4-wire (Kelvin) measurements to eliminate lead resistance.
- 제어 버튼: Used for navigating menus, setting parameters, and initiating tests.
- 회전식 선택기: For selecting measurement ranges or functions.
- 시작/중지 버튼: Initiates and terminates resistance measurements.
- 보호 케이스: Durable yellow case designed to protect the instrument in various environments.
4. 설정
4.1 초기 충전
The AEMC Model 6255 is powered by an 8.5Ah NiMH battery. Before first use, or if the battery is low, connect the provided charger to the instrument and a suitable power outlet. Allow sufficient time for the battery to fully charge. The charging indicator on the device will provide status.
4.2 테스트 리드 연결
The Model 6255 utilizes a 4-wire (Kelvin) measurement method for high accuracy, which requires four connections to the test object. This method minimizes the impact of lead resistance on the measurement.
- Ensure the instrument is turned off before connecting leads.
- Connect the current leads (C1 and C2) to the outer points of the resistance to be measured.
- Connect the potential leads (P1 and P2) to the inner points of the resistance to be measured. These leads measure the voltage drop across the resistance.
- Ensure all connections are secure and clean to prevent erroneous readings.
5. 사용 설명서
5.1 전원 켜기/끄기
Press and hold the power button (if separate, or a specific function on the rotary dial) to turn the instrument on. Repeat the action to turn it off.
5.2 측정 모드 선택
Use the rotary selector switch to choose the desired measurement range or mode. The Model 6255 supports resistance measurements from 0.1 microhm to 2500 ohms.
5.3 측정 수행
- Ensure the test leads are correctly connected to the object under test as described in Section 4.2.
- Select the appropriate measurement range using the rotary dial. If unsure, start with a higher range and decrease as needed.
- 를 누르세요 시작/중지 button to initiate the measurement. The instrument will apply a test current (0.1A to 10A) and display the resistance value on the LCD.
- Wait for the reading to stabilize. The LCD will show the measured resistance with 0.1 microhm resolution.
- 를 누르세요 시작/중지 button again to stop the measurement.
5.4 데이터 저장 및 불러오기
The Model 6255 can store up to 1500 test results. Refer to the on-screen menu or specific buttons (e.g., "MEM" or "SAVE") for instructions on saving and recalling measurements. The RS232 interface allows for data transfer to a computer for further analysis.
6. 유지관리
6.1 청소
악기의 c를 정기적으로 청소하십시오.asing와 부드러운 d로 표시amp cloth. Do not use abrasive cleaners or solvents. Ensure the instrument is turned off and disconnected from any power source before cleaning.
6.2 배터리 관리
To prolong the life of the 8.5Ah NiMH battery:
- 배터리 부족 표시등이 켜지면 배터리를 충전하십시오.
- Avoid deep discharges where possible.
- If storing the instrument for an extended period, ensure the battery is partially charged (around 50%) and recharge it every few months.
- 배터리를 극한의 온도에 노출시키지 마십시오.
6.3 교정
The AEMC Model 6255 is a precision instrument. While the product description states "No Calibration Certificate" is included, periodic calibration by a qualified service center is recommended to ensure continued accuracy and compliance with industry standards. Contact AEMC INSTRUMENTS for calibration services.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기기의 전원이 켜지지 않습니다. | 배터리가 방전되었습니다. | Connect the charger and allow the battery to charge fully. |
| Erratic or unstable readings. | Poor test lead connections; Interference; Test object issues. | Ensure leads are securely connected and clean. Move away from strong electromagnetic fields. Verify the integrity of the test object. |
| Display shows "OVERLOAD" or "OL". | Resistance value exceeds selected range; Open circuit. | Select a higher measurement range. Check for open circuits in the test setup. |
| Cannot save test results. | 메모리가 가득 찼습니다. | Transfer stored data to a computer via RS232 and clear instrument memory. |
8. 사양
| 매개변수 | 값 |
|---|---|
| 모델 | 6255 |
| 저항 범위 | 0.1 microhm to 2500 ohm |
| 해결 | 0.1 microhm |
| 정확성 | +/-0.05 Percent |
| 출력 전류 | 0.1A ~ 10A |
| 표시하다 | 액정표시장치 |
| 전원 | 8.5Ah NiMH Battery |
| 카운트 | 2,500 |
| 안전 등급 | IEC/EN 61010-1 CAT III 50V Pol 2 |
| 데이터 저장 | 1500 테스트 결과 |
| 인터페이스 | RS232 |
| 제품 치수 | 1 x 1 x 1 인치 |
| 품목 무게 | 0.01 온스 |
| 제조업체 | AEMC 계측기 |
9. 보증 정보
AEMC INSTRUMENTS products are designed and manufactured to the highest quality standards. For specific warranty terms and conditions applicable to your Model 6255 Micro-Ohmmeter, please refer to the warranty card included with your product or visit the official AEMC INSTRUMENTS website. Typically, warranties cover defects in materials and workmanship under normal use.
보증 청구를 위해 구매 증빙서류를 보관하세요.
10. 고객 지원
For technical assistance, service, or repair of your AEMC Model 6255 Micro-Ohmmeter, please contact AEMC INSTRUMENTS customer support.
- Web대지: Visit the official AEMC INSTRUMENTS website for FAQs, product documentation, and support contact information. www.aemc.com
- 연락하다: 참조 website or your product packaging for phone numbers and email addresses for technical support in your region.
When contacting support, please have your instrument's model number (6255) and serial number ready.