소개
Thank you for choosing the Audibax SP-10 Universal Sustain Pedal. This manual provides essential information for the proper setup, operation, and maintenance of your new sustain pedal. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Image: The Audibax SP-10 sustain pedal, showing its black body, chrome-plated pedal, and attached 1/4 inch jack cable.
주요 특징
- 보편적 인 호환성 : Works with most electronic keyboards and digital pianos featuring a 1/4 inch (6.35mm) jack input.
- 현실적인 느낌: Designed to emulate the sustain pedal action of an acoustic piano.
- 미끄럼 방지 디자인: Equipped with non-slip rubber pads on the base for stable placement during use.
- 내구성 있는 구조: Built with quality materials and a high-resistance spring for enhanced control and longevity.
- 극성 스위치: Includes a switch to ensure compatibility with various keyboard brands and models.
설치 지침
- Unpack the Pedal: Carefully remove the Audibax SP-10 sustain pedal from its packaging.
- Locate the Sustain Input: Identify the "Sustain," "Damper," or "Pedal" input jack on your digital piano or electronic keyboard. This is typically a 1/4 inch (6.35mm) jack.
- 페달 연결: Insert the 1/4 inch jack cable from the SP-10 pedal firmly into the sustain input of your instrument.
- 페달 위치: Place the pedal on the floor in a comfortable position for playing. Ensure the anti-slip pads on the base are making good contact with the floor to prevent movement.
- 극성 확인: If the sustain effect is inverted (e.g., sustain is on when the pedal is up, and off when pressed), locate the polarity switch on the side or bottom of the pedal and flip it to the opposite position. Test again.
이미지: 측면 view of the Audibax SP-10 sustain pedal, highlighting the polarity switch for compatibility adjustment.
작동 지침
The Audibax SP-10 sustain pedal functions like a traditional acoustic piano sustain pedal. When pressed, it sustains the notes played on your electronic keyboard or digital piano. Releasing the pedal will stop the sustain effect.
- 누르고 있기: Press the pedal down while playing notes to extend their sound.
- 풀어 주다: Lift your foot from the pedal to end the sustain effect.
- 동적 제어: The high-resistance spring allows for nuanced control, enabling you to add subtle or dramatic sustain effects to your music.
유지 보수 및 관리
- 청소: Wipe the pedal with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
- 저장: 페달은 건조하고 온도 변화가 심한 곳이나 직사광선을 피해 보관하십시오.
- 케이블 관리: Avoid kinking or sharply bending the cable. Do not pull the cable to disconnect it; always grasp the plug.
- 액체를 피하세요: Keep the pedal away from liquids to prevent electrical damage.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Sustain effect is inverted (always on or off). | Incorrect polarity setting for your instrument. | Locate the polarity switch on the pedal and flip it to the opposite position. |
| No sustain effect when pedal is pressed. |
|
|
| Pedal slides during use. | Insufficient contact with the floor or dirty anti-slip pads. | Ensure the pedal is placed on a clean, flat surface. Clean the anti-slip pads if necessary. |
명세서
- 모델: Audibax SP-10
- 커넥터: 1/4 inch (6.35mm) TS Jack
- 호환성: Universal for electronic keyboards and digital pianos
- 특징: Polarity switch, Anti-slip base, High-resistance spring
- 치수(길이 x 너비 x 높이): 약 29 x 10 x 7cm(11.4 x 3.9 x 2.8인치)
- 무게: 약 950그램(2.1파운드)
- 재료: 내구성이 뛰어난 플라스틱 casing, chrome-plated pedal, synthetic rubber base
보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Audibax web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
안전 정보
- Do not attempt to disassemble or modify the pedal.
- 어린아이의 손이 닿지 않는 곳에 보관하세요.
- Use only as intended for musical instruments.
