Compustar 2-Way 4버튼 FM 교체용 리모컨(2WT9R-FM) 사용 설명서

1. 서론

This manual provides comprehensive instructions for the Compustar 2WT9R-FM 2-Way 4-Button FM Replacement Remote Transmitter Control. This remote is designed to function with the Compustar RF-2WT9-FM system. It is crucial to verify compatibility with your existing system before attempting installation or use.

호환성 정보 :

• Designed for RF-2WT9-FM systems.
• Compatible Antenna Number: ANT-2WFMX.
• FCC ID: VA5RCD310-2WFX
• IC ID: 7087A-2WRCD310FX

2. 제품 오버view

The Compustar 2WT9R-FM remote offers advanced control and feedback for your vehicle's remote start and security system. Its 2-way communication provides confirmation of commands and vehicle status directly on its LCD screen.

2.1 주요 특징

• 양방향 소통: Receive visual and audible confirmations from your vehicle.
• 4버튼 디자인: 다양한 기능에 대한 직관적인 제어.
• FM Technology: Enhanced range and signal reliability.
• LCD 디스플레이: Provides real-time vehicle status updates (e.g., lock status, engine status, battery level).
• 확장된 범위: Estimated operational range of up to 3000 feet.
• 전원: Uses one AAA battery.

2.2 원격 제어 다이어그램

The image above displays the Compustar 2WT9R-FM remote control. The LCD screen shows icons for signal strength, lock status, engine status, and battery level. The side of the remote features four distinct buttons for various functions.

3. System Programming and Setup

This section outlines the process for flashing and updating your Compustar Blade module and controller, which is essential for the remote control to function correctly with your vehicle's system. This procedure requires a computer and specific hardware.

3.1 필수항목

• Computer (with Internet Explorer browser recommended)
• ADS-USB cable
• Compustar Controller (e.g., CM7200)
• Blade AL/TB Module

3.2 Programming Procedure

1. 계정 생성: Before starting, create an account on compustar.idatalink.com. It is recommended to use Internet Explorer and allow ActiveX if prompted.
2. Dock Blade Module: Carefully dock your Blade module into your Compustar Controller.
3. ADS-USB 연결: Plug the ADS-USB cable into an available USB port on your computer.
4. 컨트롤러 연결: Use the cable labeled "iDataLink module" to connect the ADS-USB to the black RS-232 data port on the Compustar Controller.
5. 입장 Web링크: 인터넷 익스플로러를 실행하고 다음 위치로 이동하세요. compustar.idatalink.com.
6. 모듈에 플래시하세요: Click on the "Flash Your Module" option. The system will detect the connected hardware.
7. 차량 선택: On the programming home screen, select the correct year, make, and model of your vehicle.
8. Configure and Flash: Blade 모듈의 특정 기능을 구성하거나 "플래시"를 선택하여 기본 설정을 불러올 수 있습니다. 해당 사이트에서 적절한 설치 가이드를 다운로드할 수 있습니다.
9. Flash Remote Starter: While the controller is still connected, select the "Remote Starter" tab. Here, you can configure additional features such as remote start run time, programmable outputs, and double pulse unlock. Save your changes. This tab also allows you to update the firmware for the controller when available.

3.3 System Programming Demonstration Video

3.4 원격 페어링

After the system controller and module are properly flashed and installed in your vehicle, your 2WT9R-FM remote control will need to be paired or programmed to communicate with the system. Refer to your specific Compustar system's installation guide or consult a professional installer for detailed remote pairing instructions, as this process can vary.

4. 운영

The 2WT9R-FM remote control features four primary buttons, typically located on the side, and an LCD screen for visual feedback. While specific button assignments may vary based on system configuration, common functions include:

• 잠그다: Press to lock your vehicle's doors. The LCD will display a lock icon and provide confirmation.
• 터놓다: Press to unlock your vehicle's doors. The LCD will display an unlock icon and provide confirmation.
• 원격 시작: Press and hold (or press in sequence) to remotely start your vehicle's engine. The LCD will show an engine icon and countdown timer, confirming the start.
• Trunk Release / Auxiliary: Press to open the trunk or activate an auxiliary function (e.g., power sliding doors, heated seats).

The 2-way communication feature ensures that you receive visual and audible feedback on the remote's LCD screen, confirming that your commands have been executed by the vehicle.

5. 유지관리

5.1 배터리 교체

The Compustar 2WT9R-FM remote control is powered by one AAA battery. When the battery level is low, an indicator will typically appear on the LCD screen. To replace the battery:

1. 리모컨 뒷면에서 배터리 덮개를 찾으세요.
2. 필요한 경우 작은 도구를 사용하여 조심스럽게 수납 공간을 엽니다.
3. 오래된 AAA 배터리를 제거하세요.
4. 새로운 AAA 배터리를 넣을 때 극성(+/-)을 확인하십시오.
5. 배터리 덮개를 단단히 닫으세요.

오래된 배터리는 해당 지역 규정에 따라 폐기하세요.

6. 문제 해결

If you encounter issues with your Compustar 2WT9R-FM remote control, consider the following common troubleshooting steps:

• 차량에서 응답이 없습니다:
  • Check the remote's battery level and replace if necessary.
  • Ensure you are within the estimated 3000 ft. operating range.
  • Verify that the remote is properly paired with your Compustar system (refer to Section 3.4).
  • Check for strong radio interference in your current location.
• LCD 디스플레이 문제:
  • If the display is dim or unresponsive, replace the AAA battery.
  • If icons are incorrect, re-pair the remote with the system.
• 호환성 문제:
  • Confirm that your remote is the correct model (2WT9R-FM) for your Compustar RF-2WT9-FM system and ANT-2WFMX antenna. Incompatibility can lead to non-functionality.
• System Programming Errors:
  • If you suspect issues with the Blade module or controller firmware, re-perform the system programming steps outlined in Section 3.2.

For persistent issues or complex problems, it is recommended to contact Compustar technical support or an authorized installer.

7. 사양

8. 보증 및 지원

For information regarding product warranty, technical support, or to locate an authorized Compustar dealer, please visit the official Compustar web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

공식적인 Web대지: www.compustar.com

기술 지원: Refer to the contact information provided on the Compustar web사이트 또는 제품 포장.