중요한 안전 정보
Please read and understand all instructions before installing and operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.
- 설치 표면이 구조적으로 견고하고 조명기구의 무게를 지탱할 수 있는지 확인하십시오.
- 오래된 배터리와 새 배터리를 섞지 마십시오. 알칼리성, 표준(탄소-아연), 충전식(니켈-카드뮴) 배터리를 섞지 마십시오.
- 배터리는 현지 규정에 따라 올바르게 폐기하세요.
- This product is designed for outdoor use. Ensure all seals and covers are properly secured to maintain water resistance.
- LED 조명이 켜져 있을 때는 LED 광원을 직접 쳐다보지 마십시오.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 1x Link2Home EM-BL268B Dual-Head Sensor Floodlight
- 장착 하드웨어(나사, 벽 앵커)
- Batteries (as specified)
- 사용 설명서
이미지: 앞면 view of the Link2Home EM-BL268B Dual-Head Sensor Floodlight, showing the two adjustable light heads and the motion sensor below.
제품 특징
The Link2Home EM-BL268B floodlight offers advanced features for reliable outdoor security lighting.
- 330루멘 LED 출력: Provides bright illumination for security and visibility.
- 배터리 작동: Cordless design for flexible installation without wiring.
- Adjustable Dual-Heads: Two light heads can be independently adjusted to cover desired areas.
- 140° 동작 감지 센서: Detects movement up to 40 feet away.
- Photocell Technology: Ensures the light only activates in low-light conditions to conserve battery life.
- 방수: 다양한 기상 조건에서 야외 사용을 위해 설계되었습니다.
- 작동 시간 조절 가능: Light duration can be set from 3 seconds to 7 minutes after motion detection.
Image: The Link2Home EM-BL268B floodlight with icons highlighting its key features: 140° motion sensor (max 40 ft), 330 lumens, water resistance, 2 lux light sensitivity, and adjustable run time (3s-7mins).
설정 및 설치
1. 배터리 설치
- Locate the battery compartment on the back or bottom of the floodlight unit.
- 구획 덮개를 엽니다.
- Insert the required batteries (typically 4x D-cell, refer to product packaging for exact type) ensuring correct polarity (+/-).
- Securely close the battery compartment cover to maintain water resistance.
2. 플러드라이트 장착
The floodlight is designed for flush mount installation on a wall or other flat surface.
- Choose a suitable mounting location that provides the desired coverage and is within the motion sensor's range. Ensure the surface is stable.
- Use the mounting bracket (if separate) or the base of the unit as a template to mark the drill holes on the wall.
- Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or masonry.
- Align the floodlight with the holes and secure it using the provided screws. Do not overtighten.
이미지: 측면 view of the Link2Home EM-BL268B floodlight, illustrating the mounting base and the adjustable light heads.
3. Adjusting Light Heads and Sensor
Once mounted, adjust the light heads and sensor for optimal performance.
- 라이트 헤드: Manually pivot each light head up, down, and sideways to direct the light beam to your desired area.
- 모션 센서: The motion sensor is typically located at the bottom of the unit. It can often be tilted or rotated to adjust its detection angle.
- Settings Dials: Look for small dials on the sensor unit. These typically control:
- 시간: Adjusts how long the light stays on after motion is detected (e.g., 3 seconds to 7 minutes).
- LUX/DAYLIGHT: Adjusts the ambient light level at which the sensor becomes active. Set to a lower LUX for activation only in darker conditions, or higher for activation in brighter conditions.
- SENSITIVITY/RANGE: Adjusts the detection range of the motion sensor (up to 40 feet).
Image: The Link2Home EM-BL268B floodlight from an angle, highlighting the adjustable light heads and the motion sensor with its control dials.
작동 지침
The Link2Home EM-BL268B floodlight operates automatically based on its sensor settings.
- 자동 활성화 : Once batteries are installed and settings are configured, the floodlight will automatically turn on when motion is detected within its range, provided the ambient light level is below the set LUX threshold.
- 지속: The light will remain on for the duration set by the TIME dial. If motion is continuously detected, the light will reset its timer and stay on until no motion is detected for the set period.
- 광전지 기능: The integrated photocell prevents the light from activating during daylight hours, conserving battery power. The light will only become active when the surrounding light level drops sufficiently (as determined by the LUX setting).
Image: The Link2Home EM-BL268B floodlight mounted on a brick wall during the day, demonstrating its inactive state due to sufficient ambient light.
Image: The Link2Home EM-BL268B floodlight mounted on a brick wall at night, showing its bright illumination when activated by motion in low-light conditions.
유지
- 배터리 교체: When the light output becomes dim or the unit stops activating, it is time to replace the batteries. Follow the battery installation steps in the Setup section. Always replace all batteries at once with new ones of the same type.
- 청소: 조명기구와 센서 렌즈를 주기적으로 부드러운 천으로 닦아주세요.amp cloth to remove dirt, dust, or debris. Do not use abrasive cleaners or solvents. Ensure the sensor lens is clear for optimal detection.
- 점검: Regularly check the mounting screws and the fixture for any signs of wear or damage.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. |
|
|
| 표시등이 계속 켜져 있습니다. |
|
|
| 낮에는 불이 켜집니다. |
|
|
| 탐지 범위가 좋지 않습니다. |
|
|
명세서
- 모델: EM-BL268B
- 상표: 링크투홈
- 빛의 출처: 주도의
- 루멘 출력: 330루멘
- 전원: Battery Powered (e.g., 4x D-cell, 6 Volts total)
- 왓tage: 1.5 와트
- 동작 센서 감지 각도: 140°
- 동작 센서 감지 범위: 최대 40미터(12피트)
- 작동 시간 조절 가능: 3초부터 7분까지
- Photocell Activation: Approx. 2 Lux
- 실내/실외 사용: 집 밖의
- 설치 유형: 플러시 마운트
- 색상: 검은색
- 제품 크기(LxWxH): 16.51 x 14.48 x 16.51cm(6.5 x 5.7 x 6.5인치)
- 품목 무게: 535g(1.18파운드)
보증 및 지원
This Link2Home product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Link2Home web자세한 보증 약관은 해당 사이트에서 확인하세요.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Link2Home customer service. Contact information can typically be found on the product packaging or the official brand web대지.
Web대지: www.링크투홈.com (전ample, verify actual web대지)
