1. 서론
This manual provides essential information for the safe and efficient operation of your APC SMT1500RMI2UC Line-Interactive 1500VA Uninterruptible Power Supply (UPS). The UPS is designed to protect your electronic equipment from power outages, surges, and sags, ensuring continuous power and data integrity. Please read this manual thoroughly before installation and use.
2. 안전 정보
경고: 감전 또는 폭발 위험
- This UPS contains internal batteries that may present a shock hazard even when disconnected from the utility power.
- 배터리 서비스는 배터리와 필요한 예방 조치에 대해 잘 알고 있는 사람이 수행하거나 감독해야 합니다.
- 배터리를 불 속에 버리지 마십시오. 배터리가 폭발할 수 있습니다.
- 배터리를 열거나 훼손하지 마십시오. 방출된 전해질은 피부와 눈에 해롭습니다. 독성이 있을 수 있습니다.
- 무정전 전원 공급 장치(UPS)와 연결된 장비가 제대로 접지되었는지 확인하십시오.
- Do not operate the UPS in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.
3. 제품 오버view
3.1 전면 패널
그림 3.1: 전면 view of the APC SMT1500RMI2UC UPS, showing the LCD display and control buttons.
The front panel features an intuitive LCD display and control buttons for monitoring UPS status, configuring settings, and performing self-tests. The display provides real-time information on load, battery charge, and operational status.
Figure 3.2: Close-up of the UPS LCD display, indicating 0% load and 100% battery charge.
3.2 후면 패널
그림 3.3: 후면 view of the UPS, highlighting the input power connector, six IEC-C13 output outlets, communication ports, and battery connector.
The rear panel includes the main power input, six IEC-C13 output outlets for connecting protected equipment, and various communication ports. An overload protector button is also present for resetting in case of an electrical overload.
그림 3.4: 상세 view of the USB, Serial, and Network (SmartConnect) communication ports.
3.3 SmartConnect Feature
The APC SMT1500RMI2UC features SmartConnect, allowing for cloud-based remote monitoring and management of your UPS. This enables you to receive alerts, monitor status, and perform basic management tasks from any web-활성화된 장치.
Figure 3.5: The APC SmartConnect dashboard accessible across various devices for remote monitoring.
4. 설정
4.1 풀기 및 검사
UPS 택배 상자를 조심스럽게 개봉하여 배송 중 파손 여부를 확인하십시오. 파손이 발견되면 운송업체와 판매점에 알리십시오. 포장재는 추후 재사용을 위해 보관하십시오.
4.2 배터리 연결
The UPS is shipped with the internal battery disconnected for safety. Before initial use, connect the battery according to the instructions provided in the quick start guide or on the unit itself. This typically involves pulling out the battery tray, rotating the battery, and pushing it back in until it clicks into place.
4.3 배치 및 장착
The SMT1500RMI2UC is designed for rack-mount installation. Ensure adequate ventilation around the unit. Avoid placing the UPS near heat sources or in areas with excessive dust or moisture.
Figure 4.1: The UPS securely installed within a standard server rack.
4.4 연결 장비
- Connect the UPS to a properly grounded utility power outlet using the provided power cord.
- Connect your critical equipment (servers, network devices, etc.) to the IEC-C13 output outlets on the rear of the UPS. Ensure the total load does not exceed the UPS's capacity.
- For remote monitoring, connect an Ethernet cable from your network to the SmartConnect network port on the rear panel.
4.5 초기 전원 켜기
Press the power button on the front panel to turn on the UPS. The LCD display will illuminate, and the UPS will perform a self-test. Allow the UPS to charge for at least 24 hours before relying on its full battery runtime capacity.
5. 운영
5.1 전원 켜기/끄기
- 전원을 켜려면: 전원 버튼이 화면에 불이 들어올 때까지 길게 누르세요.
- 전원을 끄려면: 디스플레이가 꺼질 때까지 전원 버튼을 길게 누르세요.
5.2 LCD 디스플레이 및 내비게이션
The LCD display provides real-time status information. Use the navigation buttons (up, down, enter, escape) to browse through menus, view 자세한 정보를 확인하고 출력 볼륨과 같은 설정을 조정할 수 있습니다.tag예: 경보 임계값 및 자체 테스트 일정.
5.3 자동 볼륨tage 규정(AVR)
UPS에는 자동 전압 조절 기능이 있습니다.tage Regulation (AVR) to correct minor voltage fluctuations without switching to battery power. This extends battery life and ensures a stable power supply to connected equipment.
5.4 Green Mode
The Green Mode feature optimizes UPS efficiency by bypassing the AVR when utility power is stable, reducing energy consumption and heat generation. The UPS automatically switches to AVR or battery mode when power conditions require it.
5.5 SmartConnect Monitoring
Once connected to your network, register your UPS with the APC SmartConnect portal. This allows you to monitor the UPS status, receive email alerts for critical events, and perform remote diagnostics via a secure web 인터페이스 또는 모바일 애플리케이션.
6. 유지관리
6.1 배터리 관리 및 교체
The internal battery has a typical lifespan of 3-5 years. Regular self-tests help monitor battery health. When the battery needs replacement, the UPS will indicate this on the LCD and via SmartConnect. Replace batteries with APC-approved replacement battery cartridges (RBCs) to ensure optimal performance and safety.
6.2 펌웨어 업데이트
Periodically check for firmware updates through the SmartConnect portal or APC's website. Firmware updates can provide performance enhancements, bug fixes, and new features. Follow the provided instructions carefully when performing updates.
6.3 청소
UPS에 먼지와 이물질이 쌓이지 않도록 하십시오. 외부를 닦을 때는 마른 천을 사용하십시오. 액체 세척제나 용제를 사용하지 마십시오.
7. 문제 해결
무정전 전원 공급 장치(UPS)에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| UPS가 켜지지 않습니다. | Battery not connected; No utility power; Faulty power cord | Ensure battery is connected; Check utility power; Verify power cord connection. |
| UPS에서 자주 경고음이 울립니다. | On battery power; Low battery; Overload | 전원 공급 상태를 확인하십시오. 배터리 충전을 시작하십시오. 연결된 부하를 줄이십시오. |
| 과부하 표시기 켜짐 | Too much equipment connected | Disconnect non-essential equipment; Press the overload protector reset button on the rear panel. |
| 배터리 교체가 필요함 | 배터리 수명이 다했습니다 | Order and install a new APC replacement battery cartridge. |
For more detailed troubleshooting, consult the full product documentation available on the APC website or through the SmartConnect portal.
8. 사양
Key technical specifications for the APC SMT1500RMI2UC UPS:
- 모델: SMT1500RMI2UC
- 용량: 1500VA / 1000W
- 입력 Voltage: 230 볼트
- 출력 콘센트: IEC-C6 13개
- 치수(높이 x 너비 x 깊이): 3.39 x 17.01 x 18.78인치(8.6 x 43.2 x 47.7cm)
- 품목 무게: 57.2파운드(26킬로그램)
- 배터리 유형: 1 x A battery (included)
- 통신 포트: USB, Serial, Network (SmartConnect)
- 색상: 검은색
- 첫 이용 가능 날짜: 3년 2018월 XNUMX일
Figure 8.1: Runtime graph illustrating the estimated battery backup time based on connected load for the SMT1500RMI2UC model.
9. 보증 및 지원
보증 정보 및 기술 지원에 대해서는 슈나이더 일렉트릭의 공식 APC 웹사이트를 참조하십시오. web사이트를 방문하거나 고객 서비스에 문의하세요. 지원팀에 문의할 때는 구매 영수증과 제품 일련번호를 보관하세요.
You can find additional resources and support through the 슈나이더 일렉트릭의 APC 제품을 아마존에서 만나보세요..
