1. 서론
The PROEL V10PLUS is a high-performance, bi-amplified 2-way monitor speaker designed for professional audio applications. It integrates a powerful 600W Class D + AB amplifier with Switch-Mode Power Supply (SMPS) technology, ensuring efficient and clear sound reproduction. Its lightweight, reinforced polypropylene cabinet and ergonomic handle provide excellent portability, while its trapezoidal shape allows for versatile use as a stage monitor or for fixed installations.
2. 주요 특징
- 바이amplified 2-way design: Features a 1-inch neodymium compression driver and a 10-inch woofer with a 2-inch voice coil.
- 강한 Amp합리화: 600W total power (Class D + AB amplifier with SMPS).
- Integrated Active Processor: Includes a dual LIMITER circuit for undistorted sound even at high levels.
- 다양한 입력: MIC/LINE input with two-band EQ for flexible audio source connection.
- 상태 표시기 : Front LED for power (ON) and signal/clip indication.
- 높은 출력: Maximum SPL of 123dB.
- 넓은 주파수 응답: 60Hz - 20kHz.
- 내구성과 휴대성이 뛰어난 디자인: Ultralight reinforced polypropylene cabinet with a comfortable carry handle.
- 유연한 배치: Trapezoidal shape for use as a stage monitor and four M10 suspension points for installation.
- 소형 및 경량: Product dimensions of 25 x 35 x 30 cm and a total weight of 10 kg.
3. 설정
Proper setup ensures optimal performance and longevity of your PROEL V10PLUS speaker. Follow these steps for initial configuration:
3.1 풀기 및 검사
스피커를 포장에서 조심스럽게 꺼내십시오. 운송 중 발생했을 수 있는 손상 여부를 확인하십시오. 향후 운송 또는 보관을 위해 원래 포장재를 보관하십시오.
3.2 배치
The V10PLUS is designed for various applications:
- 플로어 모니터: Position the speaker on the floor using its angled profile 에 대한tag전자 모니터링.
- 스피커 스탠드: Utilize the integrated pole mount socket on the bottom of the speaker to mount it on a standard speaker stand.
- 보류: Use the four M10 suspension points for fixed installations. Ensure proper rigging hardware and safety procedures are followed by qualified personnel.
Figure 3.2.1: PROEL V10PLUS in stag모니터 위치.
3.3 연결
Refer to the rear panel image for connection points.
그림 3.3.1: 후면 패널 연결 및 제어.
- 전원 연결: Connect the supplied AC power cable to the POWER input on the rear panel and then to a suitable electrical outlet. Ensure the voltage matches the speaker's requirements (220-240V~ 50/60Hz).
- 오디오 입력: Connect your audio source (mixer, microphone, instrument) to the INPUT section. The V10PLUS features a combo XLR/TRS input.
- For microphone signals, use the MIC/LINE switch to select 'MIC'.
- For line-level signals (e.g., from a mixer), select 'LINE'.
- 링크 출력: The LINK output (XLR) allows you to send the input signal to another V10PLUS speaker or another audio device.
4. 사용 설명서
Once connected, follow these steps to operate your PROEL V10PLUS speaker:
- 전원 켜기: Ensure all connections are secure and the LEVEL knob is set to minimum. Flip the POWER switch to the 'ON' position. The front LED will illuminate to indicate power.
- 입력 선택: Set the MIC/LINE switch according to your input source (MIC for microphones, LINE for line-level devices).
- 볼륨 조절: Slowly increase the LEVEL knob to achieve the desired volume. Monitor the front LED: it should primarily show 'SIGNAL' (green). If it frequently shows 'CLIP' (red), reduce the input level from your source or the speaker's LEVEL knob to prevent distortion.
- 톤 컨트롤: Use the HIGH and LOW EQ knobs to adjust the treble and bass frequencies to suit your preference or acoustic environment.
- 전원 끄기 : Before disconnecting power or cables, turn the LEVEL knob to minimum and then flip the POWER switch to 'OFF'.
5. 유지관리
Regular maintenance helps preserve the performance and appearance of your speaker.
- 청소: Use a soft, dry cloth to clean the cabinet. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or waxes.
- 그릴 청소: The metal grille can be gently cleaned with a soft brush or vacuum cleaner to remove dust.
- 저장: When not in use for extended periods, store the speaker in a dry, cool place, ideally in its original packaging or a protective cover, away from direct sunlight and extreme temperatures.
- 케이블 검사: Periodically check all power and audio cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.
Caution: Do not attempt to open the speaker cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
6. 문제 해결
This section addresses common issues you might encounter with your PROEL V10PLUS speaker.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 없습니다 | Power cable disconnected; Power switch OFF; No power from outlet. | Ensure power cable is securely connected. Turn POWER switch ON. Test outlet with another device. |
| 소리가 나지 않습니다 | Input cable disconnected/faulty; LEVEL knob at minimum; Incorrect MIC/LINE selection; Source device muted/off. | Check input cable connections. Increase LEVEL knob. Verify MIC/LINE switch setting. Ensure audio source is active and sending signal. |
| 왜곡된 소리 | Input signal too high (clipping); LEVEL knob too high; Faulty cable. | Reduce input gain from source. Reduce speaker's LEVEL knob (if CLIP LED is active). Try a different input cable. |
| 윙윙거리는/웅웅거리는 소음 | 접지 루프; 케이블 불량; 다른 전자 기기와의 간섭. | Ensure all equipment is on the same electrical circuit. Try different cables. Move speaker away from other electronic devices. |
If the problem persists after trying these solutions, please contact PROEL customer support or an authorized service center.
7. 사양
Detailed technical specifications for the PROEL V10PLUS speaker:
| 특징 | 사양 |
|---|---|
| 모델 번호 | V10플러스 |
| 제조업체 | 프로엘 |
| 스피커 유형 | 양방향 양방향amplified Monitor Speaker |
| 최대 출력 전력 | 600와트 |
| 주파수 응답 | 60Hz - 20kHz |
| 연결 기술 | 열광한 |
| 오디오 출력 모드 | 스테레오 재생 |
| 제품 크기(L x W x H) | 25 x 35 x 30cm |
| 품목 무게 | 10킬로그램 |
| 색상 | 검은색 |
| 재료 | 플라스틱, 알루미늄 |
| 추천 응용 프로그램 | 음악 |
| 호환 장치 | Television, Tablet, Personal computer, Smartphone |
| 서라운드 사운드 구성 | 2.0 |
| 방수복 | 아니요 |
| 장착 유형 | Wall Mount (also supports suspension via M10 points and floor monitor use) |
| 특별 기능 | 양방향 양방향amplifier 600 W class D + AB with SMPS |
8. 보증 및 지원
8.1 보증 정보
This PROEL V10PLUS speaker comes with an extended warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official PROEL web사이트를 방문하거나 공인 대리점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
8.2 고객 지원
For technical assistance, service, or spare parts, please contact PROEL customer support. You can find contact information and additional resources, including FAQs and product documentation, on the official PROEL web사이트 (www.proel.com). Please have your product model number (V10PLUS) and serial number ready when contacting support.
