1. 서론
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Hilti DX 5 SM powder-actuated tool. Please read this manual thoroughly before initial use and keep it for future reference. Adherence to these instructions is crucial for preventing accidents and ensuring optimal performance of the tool.
2. 안전 정보
경고: Powder-actuated tools are powerful and can cause serious injury or death if not used correctly. Always follow all safety precautions.
- Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, and safety gloves.
- Ensure the work area is clear of bystanders and free from flammable materials.
- 도구를 자신이나 다른 사람을 향해 겨누지 마십시오.
- Only use fasteners and powder loads specifically designed for the Hilti DX 5 SM tool.
- Before use, inspect the tool for any damage or wear. Do not use a damaged tool.
- Keep children and unauthorized persons away from the tool.
- Store the tool and powder loads securely and out of reach of children.
- Refer to local regulations and safety standards for powder-actuated tools.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.
- 1x DX 5_01 Basic unit
- 1x MX SM Steel magazine assembly
- 2x X-5-460-PSM Piston
- 1x 13 Round brush
- 1x X-5-460-Clean Cleaning kit
- 1x 케이스
Image 1: Hilti DX 5 SM Powder-Actuated Tool with its components and carrying case.
4. 설정
- 도구 풀기: 휴대용 케이스에서 모든 구성품을 조심스럽게 꺼내십시오.
- 구성 요소 검사: Check all parts for any signs of damage or missing pieces.
- Assemble Magazine: Attach the MX SM Steel magazine assembly to the basic unit according to the diagrams in the full Hilti user manual (not provided here). Ensure it is securely fastened.
- 하중 고정 장치: Insert the appropriate fastener into the tool's guide.
- Load Powder Cartridge: Insert the correct powder cartridge strip into the magazine. Refer to the Hilti powder load selection chart for the appropriate load for your application.
- 안전 점검: Before each use, perform a functional check to ensure all safety mechanisms are working correctly.
5. 사용 설명서
안전하고 효과적인 작업을 위해 다음 단계를 따르세요.
- 작업 표면 준비: Ensure the base material is suitable for powder-actuated fastening and free from obstructions.
- 도구 위치 지정: Place the tool firmly and perpendicularly against the work surface. Ensure the fastener guide is flush with the material.
- 압력을 가하세요: Apply firm, consistent pressure to the tool handle to engage the safety mechanism.
- 도구를 작동시키십시오: Once the tool is fully compressed against the surface, pull the trigger to drive the fastener.
- Release and Reload: Release pressure, remove the tool from the surface, and allow the magazine to advance to the next powder cartridge.
- Clear Misfires: In case of a misfire, keep the tool pressed against the surface for at least 30 seconds, then carefully remove the powder cartridge according to Hilti's safety guidelines. Never attempt to re-fire a misfired cartridge.
6. 유지관리
Regular maintenance ensures the longevity and safe operation of your Hilti DX 5 SM tool.
- 매일 청소: After each use, clean the tool thoroughly using the provided X-5-460-Clean Cleaning kit and 13 Round brush. Remove all powder residue and debris.
- Piston Inspection: Regularly inspect the X-5-460-PSM Piston for wear or damage. Replace pistons as needed to maintain optimal performance and safety.
- 매끄럽게 하기: Apply Hilti-approved lubricant to moving parts as specified in the detailed Hilti maintenance guide.
- 저장: Store the tool in its original case in a dry, secure location, away from extreme temperatures and unauthorized access.
- 전문적인 서비스: For complex repairs or annual inspections, contact an authorized Hilti service center.
7. 문제 해결
This section addresses common issues you might encounter. For problems not listed here, contact Hilti customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 도구가 발사되지 않습니다 |
|
|
| Fastener does not drive fully |
|
|
| 도구가 자주 걸림 |
|
|
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 힐티 |
| 모델 번호 | 2142666 (DX 5 SM) |
| 제조업체 | 힐티 |
| 품목 패키지 수량 | 1 |
| 배터리가 필요하세요? | 아니요 |
| ASIN | B079XY2XJ1 |
| 첫 번째 이용 가능 | 20년 2018월 XNUMX일 |
9. 보증 및 지원
For detailed warranty information, product support, or to locate an authorized service center, please visit the official Hilti web해당 웹사이트를 방문하거나 힐티 고객 서비스 센터에 직접 문의하십시오. 보증 청구를 위해서는 구매 영수증을 증빙 자료로 보관하십시오.
힐티 공식 Web대지: www.hilti.com
