CenterPoint LR312SFT2 Precision Lock Turrets Riflescope User Manual

1. 서론

This manual provides detailed instructions for the proper setup, operation, and maintenance of your CenterPoint LR312SFT2 Precision Lock Turrets Riflescope. Please read this manual thoroughly before using your riflescope to ensure safe and optimal performance.

The CenterPoint LR312SFT2 is a 3-12x44mm high-performance riflescope featuring Precision Lock Turrets, side focus adjustment, and a durable 30mm tube body. It is designed for reliable use in various conditions.

2. 제품 특징

• 3-12x Magnification: Offers a versatile range for various shooting distances.
• 44mm 대물렌즈: 제공합니다 ample light gathering for clear images.
• Precision Lock Turrets: Windage and elevation turrets with a locking mechanism to prevent accidental adjustments and allow for zero resetting.
• Side Focus Adjustment: Allows for parallax correction and optimal image clarity.
• 30mm Durable Tube: Enhances structural integrity and light transmission.
• 완전 다중 코팅 렌즈: Anti-reflective coatings on all air-to-glass surfaces for brighter, clearer views.
• 견고한 구조: 100% waterproof, shockproof, and fog proof for reliable performance in challenging environments.

그림 2.1: 각도 view of the CenterPoint LR312SFT2 Riflescope, showcasing its main components including the objective lens, eyepiece, and turrets.

3. 설정

3.1. 소총 조준경 장착

The CenterPoint LR312SFT2 riflescope is designed to be mounted using Picatinny-style rings (included). Ensure the rings are compatible with a 30mm tube diameter.

1. Securely attach the bottom halves of the Picatinny rings to your firearm's Picatinny rail, ensuring proper eye relief. Eye relief is the distance from your eye to the eyepiece lens when the full field of view 표시됩니다.
2. Place the riflescope into the bottom halves of the rings.
3. Attach the top halves of the rings and tighten the screws evenly. Do not overtighten, as this can damage the riflescope tube. Ensure the riflescope is level before final tightening.
4. Verify that the riflescope is securely mounted and does not move when subjected to light force.

Figure 3.1: The riflescope shown with mounting rings attached, ready for installation on a Picatinny rail.

3.2. 접안렌즈 초점 맞추기

The eyepiece (diopter) must be adjusted to your individual eye to ensure a sharp reticle image.

1. Point the riflescope at a plain, bright background (e.g., a clear sky or a blank wall).
2. Look through the riflescope and quickly glance at the reticle.
3. Rotate the eyepiece adjustment ring until the reticle appears crisp and sharp. Avoid staring at the reticle for too long, as your eye may compensate for blurriness.
4. Once adjusted, the eyepiece should not require further adjustment unless a different user operates the riflescope.

4. 소총 조준경 작동법

4.1. 배율 조정

The magnification ring is located at the front of the eyepiece. Rotate this ring to change the magnification from 3x to 12x. Adjust to your desired magnification level based on target distance and environmental conditions.

4.2. Side Focus / Parallax Adjustment

The side focus knob, located on the left side of the riflescope, is used to eliminate parallax and achieve optimal image clarity at various distances. Parallax is the apparent shift in the reticle's position relative to the target when your eye moves slightly off-center.

1. Set the riflescope to your desired magnification.
2. 소총 조준경으로 목표물을 조준하십시오.
3. Rotate the side focus knob until the target image appears sharp and clear.
4. To check for parallax, move your head slightly up and down, or side to side, while looking through the scope. If the reticle appears to move relative to the target, adjust the side focus knob further until this movement is minimized or eliminated.

그림 4.1: 상단 view illustrating the windage and elevation turrets, along with the side focus knob on the left.

4.3. Windage and Elevation Adjustment (Precision Lock Turrets)

The windage (horizontal adjustment) and elevation (vertical adjustment) turrets are located on top and the right side of the riflescope body. These turrets feature a precision locking mechanism to prevent unintentional changes to your zero.

1. To make an adjustment, first 터놓다 the turret by pulling it upwards.
2. Rotate the turret in the indicated direction (e.g., "UP" for elevation, "R" for right windage) to move the point of impact. Each click represents a specific adjustment value (refer to specifications for MOA/click).
3. After making adjustments, push the turret back down to lock it in place. This secures your settings and prevents accidental movement.

4.4. Zero Resetting

The Precision Lock Turrets allow you to reset the turret dials to "0" after achieving your desired zero, without affecting the internal adjustments. This provides a convenient reference point for future adjustments.

1. After successfully zeroing your riflescope, ensure the turrets are in the locked (down) position.
2. Locate the small hex screws on the top of each turret dial.
3. Using an appropriate hex key, loosen these screws. Do not remove them completely.
4. Carefully rotate the numbered dial until the "0" mark aligns with the indicator line on the riflescope body.
5. Once aligned, retighten the hex screws to secure the dial in the "0" position.
6. The turret can now be adjusted from "0" and locked back down to "0" for quick return to your established zero.

Figure 4.2: Diagram illustrating the zero resetting procedure for the Precision Lock Turrets, showing the hex screw and dial alignment.

5. 유지관리

5.1. 청소

• 렌즈: Use a soft lens brush or compressed air to remove dust and loose debris. For smudges or fingerprints, use a clean microfiber lens cloth and a small amount of lens cleaning solution. Wipe gently in a circular motion. Avoid using harsh chemicals or abrasive materials.
• 몸: 부드러운 천으로 소총 조준경 본체를 닦으십시오.amp cloth to remove dirt or grime. For stubborn dirt, a mild soap solution can be used, followed by wiping with a clean, damp 천으로 감싸십시오. 보관하기 전에 모든 습기를 제거하십시오.

5.2. 보관

Store the riflescope in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, consider using a protective case and ensuring the lenses are covered with the provided caps.

6. 문제 해결

• 흐릿한 이미지:
  • Adjust the eyepiece for reticle sharpness (Section 3.2).
  • Adjust the side focus/parallax knob for target clarity (Section 4.2).
  • Ensure lenses are clean (Section 5.1).
• 조준선이 선명하지 않음:
  • Re-adjust the eyepiece (Section 3.2).
• 영향 지점 변화:
  • Ensure mounting rings are securely tightened (Section 3.1).
  • Verify that windage and elevation turrets are locked after adjustment (Section 4.3).
  • Check for any physical damage to the riflescope or mounting system.

7. 사양

8. 보증 및 지원

The CenterPoint LR312SFT2 Riflescope comes with a 제한된 평생 보증. For specific terms and conditions, please refer to the warranty information provided with your product packaging or contact CenterPoint customer support.

For technical assistance, service, or warranty claims, please contact the manufacturer, CenterPoint, directly through their official web사이트 또는 고객 서비스 채널.