EGLO 203119A

EGLO Lighting Truxton 2-Light Bath/Vanity Light (Model 203119A) Instruction Manual

제품 끝view

This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO Lighting Truxton 2-Light Bath/Vanity Light, Model 203119A. Please read all instructions carefully before beginning installation and retain this manual for future reference.

EGLO Truxton 2-Light Bath/Vanity Light in Graphite finish with white glass shades

Image 1: The EGLO Truxton 2-Light Bath/Vanity Light, featuring a graphite finish and white glass shades.

EGLO Truxton 2-Light Bath/Vanity Light mounted on a wooden wall

Image 2: The Truxton vanity light installed, showcasing its design against a wooden background.

비디오 1: 오버view EGLO 브랜드의 제품을 소개합니다.asing various lighting products and design philosophies. This video provides context about the manufacturer's commitment to lighting solutions.

안전 정보

경고: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installing or servicing. Consult a qualified electrician if you are unsure about electrical wiring.

  • 설치하기 전에 모든 지침을 주의 깊게 읽으십시오.
  • This fixture is rated for 습한 지역, making it suitable for bathrooms and other areas exposed to moisture.
  • 장착 표면이 고정물의 무게를 지탱할 수 있는지 확인하세요.
  • Use only E26 base bulbs, maximum 60 watts each (bulbs not included).
  • 권장되는 와트를 초과하지 마십시오tage.
  • Fixture is dimmable; however, a dimmer switch is not included and must be purchased separately. Ensure the dimmer is compatible with the bulbs used.
  • 어린이를 전기 부품에 접근하지 못하게 하세요.
  • 포장재를 책임감 있게 폐기하세요.

패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.

  • 1 x EGLO Truxton 2-Light Bath/Vanity Light Fixture (Model 203119A)
  • 장착 하드웨어(나사, 전선 너트, 장착판)
  • 사용 설명서

Note: E26 60W bulbs are not included and must be purchased separately.

설치

Professional installation is recommended. If you are not familiar with electrical wiring, consult a qualified electrician.

  1. 전원 끄기: Locate the circuit breaker or fuse box that supplies power to the light fixture outlet. Turn off the power completely before proceeding.
  2. 장착 표면 준비: 배전함이 단단히 고정되어 있고 조명기구의 무게를 지탱할 수 있는지 확인하십시오.
  3. 장착 플레이트 부착: Secure the mounting plate to the electrical box using the provided screws. Ensure the plate is level.
  4. 전기 연결을 만드십시오: Carefully connect the fixture's wires to the household electrical wires:
    • 연결하다 검은색 조명기구에서 나오는 (활선) 전선 검은색 (Live) wire from the electrical box using a wire nut.
    • 연결하다 하얀색 조명기구에서 나오는 (중성) 전선 하얀색 (Neutral) wire from the electrical box using a wire nut.
    • 연결하다 녹색 or 벌거벗은 구리 조명기구에서 나오는 접지선 녹색 or 벌거벗은 구리 (Ground) wire from the electrical box, and to the ground screw on the mounting plate.
    모든 연결이 안전한지 확인하세요.
  5. 마운트 고정 장치: Carefully align the fixture with the mounting plate and secure it using the provided screws. Do not overtighten.
  6. 유리 쉐이드 설치: Gently place the white glass shades onto the fixture and secure them according to the design.
  7. 전구 설치: Screw two E26 base, maximum 60-watt bulbs into the sockets. Do not overtighten.
  8. 복원력 : 설치가 완료되고 모든 구성 요소가 단단히 고정되면 회로 차단기 또는 퓨즈 박스에서 전원을 다시 켜십시오.
Diagram showing the dimensions of the EGLO Truxton 2-Light Bath/Vanity Light

Image 3: Dimensional drawing of the fixture (L: 12.75", W: 6.81", H: 10.63"). Refer to this for space planning.

작업

Once installed and powered, the EGLO Truxton 2-Light Bath/Vanity Light operates via your wall switch. If a compatible dimmer switch is installed, you can adjust the light intensity. Ensure the bulbs used are dimmable if you intend to use a dimmer.

유지

조명기구의 외관과 기능을 유지하려면 다음 사항을 준수하십시오.

  • 청소: Turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
  • 전구 교체: Turn off power before replacing bulbs. Allow bulbs to cool completely before touching. Replace with E26 base, maximum 60-watt bulbs.
  • 점검: 모든 전기 연결부와 장착 하드웨어의 조임 상태를 주기적으로 점검하십시오.

문제 해결

문제가능한 원인해결책
조명이 켜지지 않습니다.고정 장치에 전원이 공급되지 않습니다.
배선 연결이 느슨합니다.
전구에 결함이 있습니다.
회로 차단기/퓨즈를 확인하십시오.
모든 배선 연결이 단단히 고정되었는지 확인하십시오(먼저 전원을 끄십시오).
전구를 교체하십시오.
빛이 깜박입니다.느슨한 전구.
호환되지 않는 디머 스위치/전구.
느슨한 배선.
전구를 조입니다.
조광기와 전구가 호환되는지 확인하십시오.
배선 연결 상태를 확인하십시오 (먼저 전원을 끄십시오).
Glass shade falls out.Improper installation of glass shade.Ensure glass shades are securely fastened according to installation steps. Refer to the product diagram for proper seating.

명세서

특징세부 사항
모델 번호203119A
상표에글로
마치다석묵
그늘 소재화이트 글래스
조명의 수2
전구베이스E26
최대 와트tag전구당 e60와트
권tage120 볼트
밝기 조절 가능네 (디머는 포함되지 않음)
위치 평가젖은 위치
치수(길이 x 너비 x 높이)12.75 x 6.81 x 10.63 인치
품목 무게6파운드
보증1년
인증전자상거래

보증 및 지원

This EGLO Lighting fixture comes with a 1년 한정 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.

For warranty claims, technical support, or replacement parts, please contact EGLO customer service. Keep your proof of purchase for warranty validation.

연락처 정보: Please refer to the EGLO official web최신 고객 지원 연락처 정보는 웹사이트 또는 구매 내역을 참조하십시오.

제안 65 경고: 이 제품에는 캘리포니아주에서 암, 선천적 기형 또는 기타 생식 기능 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있을 수 있습니다. 구매 전에 해당 지역 법률을 확인하십시오.asin이 제품을 구매하세요.

관련 문서 - 203119A

사전view EGLO 39685A LEMORIETA 펜던트 조명 설치 설명서
안전 예방 조치, 배선, 높이 조절 지침을 포함한 EGLO 39685A LEMORIETA 펜던트 조명에 대한 자세한 설치 가이드입니다.
사전view EGLO CUITE 390063A/390064A 테이블 Lamp 지침
EGLO CUITE 테이블의 공식 조립 및 사용 설명서amp모델 390063A 및 390064A의 전구 설치, 갓 부착 및 전원 연결 방법을 알아보세요.
사전view EGLO 204553A Broyles Chandelier Installation Guide
Official installation instructions for the EGLO 204553A Broyles chandelier. Includes safety precautions and assembly steps for this lighting fixture.
사전view EGLO GIRON-TW LED 천장 조명 설치 및 리모컨 사용 설명서 (제품 번호 75507, 31048)
EGLO GIRON-TW LED 천장 조명(제품 번호 75507, 31048)의 설치 및 밝기와 색온도 조절을 위한 ET3386 적외선 리모컨 사용 방법에 대한 종합 가이드입니다.
사전view EGLO 44001A MIDSUMER 펜던트 조명 설치 가이드
EGLO 44001A MIDSUMER 펜던트 조명 공식 설치 설명서입니다. 단계별 안내를 통해 새 EGLO 조명 기구를 안전하게 설치하는 방법을 알아보세요.
사전view EGLO 99591A NARICES 서스펜션 라이트 - 설치 가이드
EGLO 99591A NARICES 서스펜션 조명 기구에 대한 종합적인 설치 안내서입니다. 필수 안전 예방 조치, 자세한 조립 단계, 전기 연결 지침 및 높이 조절 지침이 포함되어 있습니다. 새 EGLO 조명을 안전하게 설치하는 방법을 알아보세요.