Teknetics Tek-Point Pulse Induction Pinpointer User Manual

1. 서론

Thank you for choosing the Teknetics Tek-Point Pulse Induction Pinpointer. This device is designed to accurately locate metal objects in various environments, including soil, sand, and underwater. Its pulse induction technology provides enhanced sensitivity, especially in mineralized ground. Please read this manual thoroughly before operating your pinpointer to ensure proper use and to maximize its performance and longevity.

The Tek-Point is a fully waterproof pinpointer, submersible to 6 feet, making it suitable for both fresh and saltwater use. It features an LED light for low-light conditions and comes with a belt holster for convenient carrying.

2. 제품 오버view

The Tek-Point pinpointer is engineered for precision and durability. Familiarize yourself with its main components and features.

Teknetics Tek-Point Pinpointer with LED light and belt holster

그림 1: Teknetics Tek-Point Pulse Induction Pinpointer. This image displays the green-colored pinpointer, highlighting its compact design, the tip for detection, and the control button. A belt holster is also visible, indicating its portability.

주요 특징:

Pulse Induction Technology: Provides superior depth and sensitivity, especially in challenging ground conditions.
방수 디자인 : Fully submersible up to 6 feet (1.8 meters) for use in wet environments.
감지 모드: Offers audible beep, vibration, or a combination of both for target indication.
LED 조명: Integrated LED for illuminating the target area in low-light conditions.
단일 버튼 작동: Simple and intuitive control for all functions.
3가지 민감도 레벨: Adjustable sensitivity to fine-tune detection for various target sizes and conditions.
Lost Mode Alarm: An alarm feature to help locate the pinpointer if misplaced.
Belt Holster: Included for convenient and secure carrying.

3. 설정

3.1 배터리 설치

The Tek-Point pinpointer requires one 9V battery (not included) for operation. Ensure the battery is fresh and correctly installed for optimal performance.

Locate the battery cap at the rear end of the pinpointer.
Unscrew the battery cap by turning it counter-clockwise.
Insert a fresh 9V battery, ensuring the positive (+) and negative (-) terminals align correctly with the pinpointer's contacts.
Carefully screw the battery cap back on clockwise until it is securely tightened. Ensure the O-ring seal is properly seated to maintain the waterproof integrity of the device.

중요한: Always ensure the battery cap is fully tightened before submerging the pinpointer in water to prevent water ingress and damage.

4. 사용 설명서

4.1 전원 켜기/끄기

To turn on the pinpointer, press and hold the power button for approximately 1 second until you hear a short beep and/or feel a vibration. The LED light will also illuminate briefly.
To turn off the pinpointer, press and hold the power button for approximately 2 seconds until you hear a longer beep and/or feel a longer vibration. The LED light will turn off.

4.2 감도 조정

The Tek-Point has 3 sensitivity levels. Adjusting the sensitivity allows you to optimize detection for different target sizes and ground conditions.

With the pinpointer powered on, quickly press the power button repeatedly to cycle through the sensitivity levels.
Each press will advance to the next sensitivity level, indicated by a series of short beeps/vibrations (e.g., one beep for Level 1, two for Level 2, three for Level 3).
Level 1 is the lowest sensitivity, suitable for large targets or highly mineralized ground. Level 3 is the highest sensitivity, ideal for small targets or less mineralized ground.

4.3 Detection Modes (Beep, Vibrate, Both)

The pinpointer can be set to beep, vibrate, or both when a target is detected.

To change the detection mode, press and hold the power button for approximately 3 seconds (after powering on, but before powering off). The pinpointer will cycle through the modes: Beep Only, Vibrate Only, Beep + Vibrate.
Release the button when you reach your desired mode.

4.4 Lost Mode Alarm

If the pinpointer is left on and inactive for a period (typically 5 minutes), it will emit an audible alarm to help you locate it. This feature helps prevent accidental loss in the field.

4.5 LED 조명 사용하기

The integrated LED light automatically activates when the pinpointer is turned on, providing illumination for the target area. It will turn off when the pinpointer is powered off.

5. 유지관리

5.1 청소

After each use, especially in wet or sandy conditions, rinse the pinpointer with fresh water.
부드러운 천으로 장치를 닦으십시오. damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
Ensure the battery cap area and O-ring are free of dirt and debris.
Allow the pinpointer to air dry completely before storage.

5.2 배터리 관리

Remove the battery if the pinpointer will not be used for an extended period to prevent leakage and damage.
사용한 배터리는 현지 규정에 따라 책임감 있게 폐기하십시오.

5.3 보관

Store the pinpointer in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided belt holster for protection during transport and storage.

6. 문제 해결

문제	가능한 원인	해결책
Pinpointer does not turn on.	배터리가 방전되었거나 잘못 설치되었습니다.	Replace with a fresh 9V battery and ensure correct polarity. Check battery cap is tightened.
탐지 능력이 약하거나 일관성이 없습니다.	Low battery; incorrect sensitivity setting; highly mineralized ground.	Replace battery. Adjust sensitivity level (try lower levels in mineralized ground).
False signals or chatter.	High sensitivity in noisy environments; electromagnetic interference.	Reduce sensitivity. Move away from power lines or other electronic devices.
침수 후 물 유입.	Battery cap not properly sealed or O-ring damaged.	Ensure battery cap is fully tightened before submersion. Inspect O-ring for damage and replace if necessary.

7. 사양

모델: TEK-POINT
탐지 기술: 맥박 유도
방수 기능: 수심 1.8미터(6피트)까지 완전 방수 가능
감도 수준: 3 (조정 가능)
감지 모드: Audio Beep, Vibration, Audio + Vibration
전원: 1x 9V Battery (not included)
통합 기능: LED Light, Lost Mode Alarm
재료: 튼튼한 플라스틱
치수: 약 10.3 x 3.3 x 2cm(26.2 x 8.4 x 5.1인치)
무게: 배터리를 제외한 무게는 약 272그램(9.6온스)입니다.
포함된 액세서리: 벨트 홀스터

8. 보증 및 지원

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Teknetics web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

제조업체: Teknetics

For further assistance, you may contact Teknetics customer service through their official channels. Details are typically available on the manufacturer's web사이트 또는 제품 포장.

	Teknetics Tek-Point Pinpointer 사용 설명서: 기능, 작동 및 문제 해결 텍네틱스 텍-포인트 금속 탐지기 사용 설명서입니다. 방수 설계, 감도 설정, 작동법, 그리고 효과적인 보물 찾기를 위한 문제 해결 팁을 알아보세요.
	Teknetics DigiTek 금속 탐지기 사용 설명서 Teknetics DigiTek 금속 탐지기 사용 설명서에는 조립, 작동, 기능, 문제 해결 및 보증 정보가 포함되어 있습니다. 보물 찾기에 탐지기를 효과적으로 사용하는 방법을 알아보세요.
	Teknetics Delta 4000 금속 탐지기 사용 설명서 Teknetics Delta 4000 금속 탐지기에 대한 포괄적인 사용 설명서로, 조립, 작동, 기본 금속 탐지 원리, 대상 식별, 문제 해결, 보증 및 액세서리에 대한 내용을 다루고 있습니다.
	Teknetics T2 스페셜 에디션 전문 금속 탐지기: 포괄적인 작동 설명서 고성능 전문가용 금속 탐지기, Teknetics T2 스페셜 에디션을 만나보세요. 이 매뉴얼은 고급 기능, VLF 유도 저울 기술, 사용 편의성, 그리고 동전 탐지, 유물 탐색, 금 채굴 기법을 다룹니다.
	Teknetics T2 스페셜 에디션 전문 금속 탐지기: 포괄적인 작동 설명서 및 가이드 이 포괄적인 작동 설명서와 금속 탐지 가이드를 통해 Teknetics T2 Special Edition 전문 금속 탐지기의 기능, 작동법, 기술을 살펴보세요.
	Teknetics T² Professional Metal Detector: Comprehensive Operating Manual Comprehensive operating manual and guide for the Teknetics T² professional metal detector. Learn about its features, controls, search techniques, and specifications for coinshooting, relic hunting, and gold prospecting.