소개
This manual provides instructions for the safe and effective use of your ONN ONA17CA001 58-inch Tripod. Please read this manual thoroughly before operating the device and retain it for future reference.
The ONN 58-inch Tripod is designed to provide stable support for cameras and camcorders, facilitating clear and steady image capture. It features a 3-way fluid pan-head, a quick-release plate, and a dual-bubble level for precise adjustments. The tripod extends to 58 inches and folds to 23 inches for portability, with a maximum load capacity of 5 pounds.
안전 정보
- Do not exceed the maximum load capacity of 5 pounds (2.27 kg). Overloading can cause instability and damage to the tripod or attached equipment.
- Ensure all leg locks and head adjustments are securely tightened before leaving the camera unattended.
- 삼각대를 고르지 않거나 불안정한 표면에 놓지 마십시오.
- 삼각대를 조절할 때는 손과 손가락이 움직이는 부분에 닿지 않도록 주의하십시오.
- Do not expose the tripod to extreme temperatures or harsh weather conditions for prolonged periods.
- 삼각대를 사용하지 않을 때는 먼지와 손상으로부터 보호하기 위해 휴대용 가방에 넣어 보관하십시오.
패키지 내용
- ONN ONA17CA001 58-inch Tripod
- 운반 가방
설정
1. 삼각대 펼치기
Carefully remove the tripod from its carrying bag. Extend the legs one section at a time by releasing the leg locks. Ensure each section is fully extended and the leg locks are securely fastened before proceeding.
Image: The ONN ONA17CA001 58-inch Tripod shown fully extended with legs locked.
2. 삼각대 높이 조절
To adjust the height, release the leg locks on each leg and extend them to the desired length. Securely fasten the leg locks. For additional height, extend the center column by loosening its locking knob, raising the column, and then tightening the knob.
3. Attaching Your Camera/Camcorder
- 삼각대 헤드에 있는 퀵 릴리스 플레이트를 찾으세요.
- Release the quick-release plate lever and remove the plate from the tripod head.
- Attach the quick-release plate to the bottom of your camera or camcorder by screwing the mounting screw into the device's tripod socket. Ensure it is finger-tight.
- Align the quick-release plate with the tripod head and reinsert it, ensuring it clicks securely into place. Lock the quick-release plate lever.
운영
1. Using the 3-Way Fluid Pan-Head
The 3-way fluid pan-head allows for independent adjustments of pan (horizontal rotation), tilt (vertical rotation), and portrait/landscape orientation. Each axis has a dedicated locking knob or handle.
- 팬 조정: Loosen the pan locking knob (usually at the base of the head) to rotate the camera horizontally. Tighten to secure.
- 기울기 조정: Loosen the tilt handle to adjust the camera's vertical angle. Tighten the handle to secure.
- Portrait/Landscape Adjustment: Loosen the side knob to tilt the camera for portrait orientation. Tighten to secure.
2. Utilizing the Dual-Bubble Level
The dual-bubble level helps ensure your camera is perfectly level for straight horizons and accurate compositions. Adjust the tripod legs and/or the head until both bubbles are centered within their respective indicators.
3. Transporting the Tripod
Before transport, remove your camera, collapse the center column, and retract all leg sections. Secure all leg locks and head adjustments. Place the folded tripod into the provided carrying bag for protection and ease of transport.
유지
- 청소: 삼각대는 사용 후 매번 부드럽고 마른 천으로 닦아 먼지와 오염물을 제거하십시오. 잘 지워지지 않는 얼룩은 약간 거친 천으로 닦아내십시오.amp 천으로 닦아내고 완전히 말리세요. 연마성 세제나 용제는 사용하지 마세요.
- 매끄럽게 하기: The fluid pan-head is factory-lubricated and generally does not require additional lubrication. If movements become stiff, consult customer support.
- 저장: Store the tripod in a cool, dry place, preferably in its carrying bag, away from direct sunlight and extreme temperatures.
- 점검: Periodically check all screws, knobs, and leg locks for tightness. Tighten any loose components. Inspect rubber feet for wear and tear.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 삼각대가 불안정해요. | Leg locks not fully engaged; uneven surface; overloaded. | Ensure all leg locks are securely fastened. Move to a level surface. Verify camera weight does not exceed 5 lbs. |
| Camera not securely attached. | Quick-release plate not tightened to camera; quick-release plate not locked into head. | Tighten the mounting screw on the quick-release plate to the camera. Ensure the quick-release plate lever is locked on the tripod head. |
| Head movement is stiff or loose. | 잠금 손잡이가 너무 꽉 조여 있거나 너무 헐거워졌습니다. | Adjust the pan and tilt locking knobs to achieve desired tension. Do not overtighten. |
명세서
- 모델: ONA17CA001
- 최대 높이: 58인치(147.3cm)
- 접힌 길이: 23인치(58.4cm)
- 하중 용량: 5파운드(2.27kg)
- 헤드 타입 : 3-Way Fluid Pan-Head
- 재료: Aluminum (legs), Plastic/Rubber (head components, feet)
- 품목 무게: 2.9파운드(1.32kg)
- 특징: Quick-release plate, Dual-bubble level, Rubber-grip feet
- 호환 장치: Cameras, Camcorders
보증 및 지원
For warranty information or technical support, please refer to the documentation provided at the point of purchase or visit the official ONN web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
온라인 지원: www.onnproducts.com/support (전amp(링크는 실제 링크와 다를 수 있습니다)
고객 서비스: Refer to your product packaging or the ONN web연락처 정보 사이트.
