1. 서론
Thank you for choosing the V-TAC LED Floodlight VT-20-W. This manual provides essential information for the safe installation, operation, and maintenance of your new LED floodlight. Please read these instructions carefully before installation and retain them for future reference.
Image 1.1: V-TAC LED Floodlight VT-20-W (Front View)
This image shows the V-TAC LED Floodlight VT-20-W from the front, highlighting its compact design and LED array.
2. 안전 정보
경고: 설치 또는 유지 관리 전에 항상 전원을 차단하십시오.
- 설치는 자격을 갖춘 전기 기술자가 수행해야 합니다.
- 전원 공급 장치 볼륨을 확인하십시오.tage matches the product's requirements (AC 220-240V, 50Hz).
- 하우징이나 케이블이 손상된 경우 조명을 작동하지 마십시오.
- This product is designed for outdoor use (IP65 rated). Ensure all connections are waterproof.
- LED 조명이 켜져 있을 때는 LED 광원을 직접 쳐다보지 마십시오.
- 가연성 물질에서 멀리 두세요.
- 적절한 접지를 확인하십시오.
3. 패키지 내용
패키지에는 다음 품목이 포함됩니다.
- 1 x V-TAC LED Floodlight VT-20-W
- 사용 설명서(본 문서)
이미지 3.1: 제품 포장
This image displays the retail packaging for the V-TAC LED Floodlight, indicating key features like 20W power, 100° beaming angle, 1600lm brightness, and 30,000H long life.
4. 제품 오버view 및 기능
The V-TAC LED Floodlight VT-20-W is a high-performance outdoor lighting solution.
주요 특징:
- 힘: 20 와트
- 색온도: 6400K(쿨 화이트)
- 광속: 1600루멘
- Beaming Angle: 100°
- 본체 소재 : 다이캐스팅 알루미늄
- 침투 방지(IP) 등급: IP65(방수 및 방진)
- 에너지 효율성: Up to 85% energy saving compared to traditional lighting.
- 긴 수명: 약 30,000시간.
- Efficient Heat Sink: Designed to prevent overheating and prolong lamp 수명.
- SMD LED: Utilizes Surface Mounted Device (SMD) LEDs for efficient illumination.
치수:
The floodlight has compact dimensions suitable for various outdoor installations.
- 길이: 15.3cm
- 너비: 13.2cm
- 깊이: 2.7cm
- 무게: 400g
이미지 4.1: 제품 치수
This image illustrates the physical dimensions of the V-TAC LED Floodlight, showing a length of 153 mm, a height of 132 mm, and a depth of 27 mm.
Image 4.2: IP65 Rating
This image highlights the IP65 rating of the floodlight, indicating its resistance to water and dust, making it suitable for outdoor use.
Image 4.3: Efficient Heat Sink
This image displays the rear of the floodlight, emphasizing the efficient heat sink design which helps prevent overheating and extends the product's lifespan.
5. 설정 및 설치
This floodlight is designed for outdoor use and can be mounted as a freestanding unit. Professional installation by a qualified electrician is highly recommended to ensure safety and compliance with local electrical codes.
설치 단계:
- 전원 차단: Before starting any installation, ensure the main power supply to the installation area is switched off at the circuit breaker.
- 장착 위치: Choose a suitable outdoor location that provides the desired illumination coverage and allows for secure mounting. The floodlight comes with a bracket for surface mounting.
- 안전한 장착: Use appropriate screws and anchors (not included) to securely fasten the mounting bracket to the desired surface. Ensure the surface can support the weight of the floodlight.
- 배선 연결:
- Connect the brown wire (L) to the Live terminal.
- Connect the blue wire (N) to the Neutral terminal.
- Connect the yellow/green wire (E) to the Earth/Ground terminal.
- 각도 조정: Once mounted and wired, adjust the floodlight's angle to direct the light as required.
- 전원 복원: Restore power to the circuit and test the floodlight.
Image 5.1: Wiring Connections
This image displays the rear of the floodlight, showing the electrical cable with brown (Live), blue (Neutral), and yellow/green (Earth) wires for connection.
6. 사용 설명서
The V-TAC LED Floodlight VT-20-W operates by direct connection to your electrical mains.
- Ensure the floodlight is correctly installed and wired according to the "Setup and Installation" section.
- Switch on the power supply to the floodlight circuit. The floodlight will illuminate instantly.
- To turn off the floodlight, switch off the power supply to its circuit.
For automated operation (e.g., dusk-to-dawn or motion sensing), an external sensor or timer switch must be installed by a qualified electrician.
Image 6.1: Floodlight in Outdoor Application
This image shows multiple V-TAC LED Floodlights illuminating the exterior of a building at night, demonstrating their effectiveness in outdoor lighting.
7. 유지관리
The V-TAC LED Floodlight VT-20-W requires minimal maintenance.
- 청소: Ensure the floodlight is switched off and cool before cleaning. Wipe the exterior with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 점검: Periodically inspect the floodlight and its wiring for any signs of damage, wear, or loose connections. Address any issues promptly.
- 사용자가 수리할 수 없는 부품: There are no user-serviceable parts inside the floodlight. Do not attempt to open or repair the unit.
8. 문제 해결
If you encounter issues with your V-TAC LED Floodlight, refer to the following troubleshooting guide:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. |
|
|
| 빛이 약하거나 깜빡거립니다. |
|
|
If the problem persists after attempting these solutions, contact V-TAC customer support or a qualified electrician.
9. 사양
| 매개변수 | 값 |
|---|---|
| 모델 번호 | VT-20-W |
| 힘 | 20 와트 |
| 입력 Voltage | AC 220-240V, 50Hz |
| 광속 | 1600루멘 |
| 색온도 | 6400K(쿨 화이트) |
| 바디 컬러 | 하얀색 |
| 재료 | 다이캐스팅 알루미늄 |
| 제품 크기 (길이 x 너비 x 깊이) | 15.3 x 13.2 x 2.7cm |
| 무게 | 400g |
| IP 등급 | IP65 |
| 특정 사용 | 야외 사용 |
| 설치 유형 | Freestanding (with mounting bracket) |
| 에너지 효율 등급 | F |
| 에너지 소비량(1000시간) | 20킬로와트 |
| CRI(연색지수) | 80 |
Image 9.1: EU Energy Label
This image shows the EU energy label for the V-TAC LED Floodlight, indicating an energy efficiency class of F and an energy consumption of 20 kWh per 1000 hours. More details can be found at eprel.ec.europa.eu/qr/966766.
10. 보증 및 지원
V-TAC products are manufactured to high standards and are designed for durability. While specific warranty details are not provided in this manual, V-TAC typically offers a warranty period for its products. Please refer to your purchase documentation or the official V-TAC web자세한 보증 정보는 사이트를 참조하십시오.
For technical support, troubleshooting assistance, or warranty claims, please contact your local V-TAC distributor or visit the official V-TAC web대지.
제조업체: V-TAC 유럽 주식회사
주소: bul. Rozhen 41, Sofia, Bulgaria