소개
Thank you for choosing the mDesign Metal 3 Tier Adjustable/Expandable Shoe and Boot Storage Organizer Rack. This product is designed to provide a versatile and space-saving solution for organizing your footwear. Its adjustable width and stackable design allow for efficient use of space in various home environments, including closets, entryways, mudrooms, bedrooms, and garages.

Image: The mDesign 3 Tier Adjustable/Expandable Shoe and Boot Storage Organizer Rack, shown fully assembled and holding various types of footwear.
설치 지침
Assembly of your mDesign shoe rack is required and designed to be straightforward. All necessary hardware and easy-to-follow instructions are included in the package.
패키지 내용:
- Side frames (2)
- Adjustable horizontal rods (6)
- Assembly hardware (screws, plastic feet)
- 설명서
조립 단계:
- 모든 구성품을 풀어서 패키지 내용물 목록과 비교해보세요.
- Attach the horizontal rods to the side frames using the provided screws. Ensure all connections are secure.
- Insert the plastic feet into the bottom of the side frames to protect your floors.
- To expand the rack, gently pull the inner rods outwards until the desired width is achieved. The rack expands from 18.25 inches up to 32 inches wide.

Image: A visual representation of the shoe rack's expandable feature, illustrating how the width can be adjusted.
Stacking Multiple Units:
For increased storage capacity, multiple mDesign shoe racks can be stacked vertically. Use the included pins to securely connect the units.

이미지: 자세한 view of the stacking mechanism, highlighting the pins used to connect multiple racks.
작동 지침
Once assembled, the shoe rack is ready for use. Its design accommodates various types of footwear, from flats and sneakers to boots.
Placing Footwear:
- Place shoes on the horizontal rods. The angled design helps keep shoes securely in place.
- The three tiers maximize vertical storage, keeping shoes and boots off the floor.
- The expandable width allows you to adjust the rack to fit the number of shoes you need to store, providing up to 31 inches of usable space per level.

Image: The shoe rack effectively storing multiple pairs of boots on its tiers.
제품 끝view 동영상:
이 영상을 시청하여 포괄적인 내용을 알아보세요.view of the mDesign 3 Tier Adjustable and Expandable Shoe and Boot Rack, demonstrating its features and versatility.
Video: An official mDesign video showcasing the 3 Tier Adjustable and Expandable Shoe and Boot Rack, including its design and functionality.
유지
To ensure the longevity and appearance of your mDesign shoe rack, follow these simple maintenance guidelines:
- 청소: Wipe the rack clean with a dry cloth as needed. For tougher dirt, a slightly damp 천을 사용한 후 바로 말릴 수 있습니다.
- 가혹한 화학 물질을 피하세요: 연마성 세척제나 독한 화학 약품은 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- 정기 검사: 모든 나사와 연결부를 주기적으로 점검하여 단단히 고정되어 있는지 확인하세요.
문제 해결
If you encounter any issues with your shoe rack, please refer to the following common solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 랙이 불안정하거나 흔들거리는 느낌이 듭니다. | 조립 나사가 헐거워졌거나 위치가 고르지 않습니다. | Ensure all screws are tightened securely. Place the rack on a flat, level surface. |
| Difficulty expanding/contracting the rack | 슬라이딩 메커니즘에 먼지나 이물질이 끼었습니다. | Clean the sliding parts with a dry cloth. Apply a small amount of silicone lubricant if necessary. |
| Screws not seating properly during assembly | Misaligned parts or manufacturing defect. | Double-check alignment. If screws still do not seat, contact customer support for replacement hardware. |
| Rack tipping over | Exceeded weight limit or improper weight distribution. | Do not exceed the maximum weight limit of 10 kilograms (22.1 pounds). Distribute weight evenly across the tiers. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | Metal 3 Tier Adjustable/Expandable Shoe and Boot Storage Organizer Rack |
| 모델 번호 | 00556MDCOEU |
| 상표 | 엠디자인 |
| 재료 | 합금강 |
| 색상 | 검은색 |
| Product Dimensions (Min.) | 18.25인치 깊이 x 18.25인치 너비 x 16.93인치 높이 |
| Product Dimensions (Max.) | 18.25인치 깊이 x 32인치 너비 x 16.93인치 높이 |
| Usable Storage Space per Level | 폭 17.25인치 ~ 31인치 |
| 계층 수 | 3 |
| 중량 제한 | 10킬로그램(22.1파운드) |
| 조립이 필요합니다 | 예 |
| 장착 유형 | 독립형 |
| 한국어: | 192173005569 |
보증 및 지원
Specific warranty information for this product is not provided in the available data. For details regarding warranty coverage, returns, or any product-related inquiries, please contact mDesign customer support directly.
You can typically find contact information for mDesign on their official web제품을 구매한 소매업체나 사이트를 통해서도 구매 가능합니다.



