1. 서론
The Mackie MTest-1 is a versatile, battery-powered cable tester designed for quick and accurate verification of various audio and data cables. It features a simple 5-way rotary switch for testing individual pins on connectors and includes probes for manual continuity checks. This manual provides detailed instructions for setting up, operating, and maintaining your MTest-1 to ensure reliable performance.
2. 특징
- Tests most commonly used connector types in live sound and studio applications.
- Quickly verifies each pin via a 5-way rotary switch.
- Allows manual continuity checks with supplied probes.
- Powered by a single 9V battery.
- Features a robust, 'Built-like-a-tank' construction for durability.
3. 패키지 내용
- 1 x MTest-1 Cable Tester Unit
Note: A 9V battery is required for operation and may not be included.
4. 설정
4.1 배터리 설치
The MTest-1 requires one 9V battery for operation. To install or replace the battery:
- 장치 밑면에서 배터리 칸을 찾으세요.
- 배터리실 커버를 밀어서 엽니다.
- Insert a fresh 9V battery, ensuring correct polarity (+/-).
- 배터리 덮개를 단단히 닫으세요.
그림 1: 밑면 view showing the battery compartment. Lift to withdraw the battery.
4.2 이상view 커넥터 수
The MTest-1 features a comprehensive array of input and output connectors on its sides and top panel, allowing for testing of various cable types. Familiarize yourself with the location of each connector type before operation.
그림 2: 상향식 view of the Mackie MTest-1 Cable Tester, highlighting the diverse range of input and output ports available for testing.
5. 사용 설명서
5.1 Cable Testing with 5-Way Switch
The MTest-1's primary function is to test the continuity of individual pins within a cable using its rotary switch and LED indicators. This method is suitable for most standard audio and data cables.
- Connect both ends of the cable you wish to test into the appropriate input/output jacks on the MTest-1. For example, for an XLR cable, connect one end to an XLR-M port and the other to an XLR-F port.
- Turn the 5-way rotary switch to cycle through the pins (1, 2, 3, 4, 5).
- Observe the LED indicators. A lit LED next to a pin number indicates continuity for that specific pin. If an LED does not light up for a connected pin, it indicates a break in that connection.
- The 'Battery Check' LED will illuminate if the battery has sufficient charge.
그림 3: 각도 view of the Mackie MTest-1, illustrating the 5-way rotary switch and corresponding LED indicators for pin continuity testing.
5.2 Manual Continuity Testing with Probes
For custom cables, internal wiring, or specific components, the MTest-1 includes probes for manual continuity testing.
- Plug the red and black probes into the 'Banana / Continuity' jacks on the top panel of the MTest-1.
- Touch the tips of the probes to the two points you wish to test for continuity.
- If there is continuity, the 'Continuity' LED will light up and a beeper will sound.
Figure 4: The Mackie MTest-1 with red and black continuity probes connected to the 'Banana / Continuity' jacks.
5.3 Official Product Video: Mackie Cable Tester MTest-1
Video 1: An official product video demonstrating the features and usage of the Mackie MTest-1 Cable Tester.
6. Supported Connector Types
The MTest-1 is equipped to test a wide range of common audio and data connector types, including:
- TRS (Tip-Ring-Sleeve)
- TS (Tip-Sleeve)
- XLR (3-pin and 5-pin)
- (주)알에이씨에이
- 말하기
- 3.5mm TRS
- 미디
- Banana Jacks
- USB (Type A and Type B)
- 이더넷 (RJ45)
7. 사양
| 사양 | 값 |
|---|---|
| 상표 | 마키 |
| 모델 번호 | CT-MACKIE (MTest-1) |
| 전원 | 배터리 구동 |
| 배터리 유형 | 1 x 9V battery required (Alkaline recommended) |
| 품목 무게 | 1.4파운드(0.64kg) |
| 제품 크기(L x W x H) | 6.5 x 4.8 x 2.7인치(16.5 x 12.2 x 6.9cm) |
| 색상 | 검은색 |
| 측정 유형 | Ohmmeter (for continuity) |
| 사양 충족 | CE, RoHS |
8. 유지관리
- 청소: Use a soft, dry cloth to clean the exterior of the MTest-1. Avoid using abrasive cleaners or solvents.
- 배터리 교체: Replace the 9V battery when the 'Battery Check' LED indicates low power or when the unit fails to power on. Always dispose of used batteries responsibly.
- 저장: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures when not in use. If storing for extended periods, remove the battery to prevent leakage.
- 커넥터 관리: Keep all connector ports free of dust and debris.
9. 문제 해결
- 장치의 전원이 켜지지 않습니다. 9V 배터리가 올바르게 설치되었는지, 그리고 충전량이 충분한지 확인하십시오. 필요한 경우 배터리를 교체하십시오.
- No LED lights during cable test: Ensure both ends of the cable are securely connected to the appropriate ports. Verify the 5-way switch is correctly positioned for the pins being tested. Check the battery status.
- Incorrect LED readings: Double-check the cable type and ensure it is compatible with the MTest-1's testing capabilities. Confirm the cable is fully inserted into the ports.
- Continuity beeper does not sound: For manual continuity tests, ensure the probes are firmly touching the points being tested and that the 'Banana / Continuity' jacks are properly connected.
10. 보증 및 지원
Mackie products are designed for reliability and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Mackie website. For technical support, troubleshooting assistance, or service inquiries, please contact Mackie customer support through their official channels.
