1. 서론
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. 제품 특징
- 보편적 인 호환성 : Controls a wide range of devices.
- 자기 학습 기능: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- 큰 버튼: Designed with oversized, clearly marked buttons for enhanced usability.
- 직관적인 디자인: Simple layout for straightforward operation.
- Quick Programming: Learning process typically takes less than one minute per button.
3. 설정
3.1. 배터리 설치
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- 리모콘 뒷면에 있는 배터리함 덮개를 찾으세요.
- 덮개를 아래로 밀거나 걸쇠를 누른 후 들어 올려 여세요.
- AAA 배터리 2개를 넣고 양극(+)과 음극(-) 단자가 배터리 보관함 내부 표시와 올바르게 맞춰지도록 합니다.
- 배터리 칸 덮개를 다시 끼우고, 딸깍 소리가 날 때까지 밀어서 제자리에 고정합니다.
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- 학습 모드로 들어가기: 를 누르고 계세요 힘 button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- 신호 전송: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- 다른 버튼에도 동일하게 반복하세요: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- 학습 모드 종료: 원하는 버튼을 모두 프로그래밍했으면 버튼을 누르십시오. 힘 button on the Simply remote again to exit learning mode. The indicator light will turn off.
메모: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
이미지: 앞면 view of the Simply SUPTLB001 remote control.
4. 사용 설명서
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- 장치 선택: 를 누르세요 A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- 전원 켜기/끄기: 를 누르세요 힘 선택한 기기를 켜거나 끄는 버튼입니다.
- 볼륨 조절: 사용하세요 V+ 볼륨을 높이는 버튼 V- 볼륨을 줄입니다.
- Program/Channel Control: 사용하세요 P+ button to go to the next program/channel and P- to go to the previous program/channel.
- AV 입력: 를 누르세요 AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. 유지관리
- 청소: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- 배터리 교체: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- 저장: 리모컨은 직사광선과 극한의 온도를 피해 건조한 곳에 보관하세요.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 리모컨이 작동하지 않습니다. | 배터리가 소진되었거나 잘못 삽입되었습니다. | 올바른 극성을 확인하여 새 AAA 배터리로 교체하세요. |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| 원격 범위가 좁습니다. | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. 사양
| 상표 | 우수한 전자 제품 |
| 모델명 | 간단히 |
| 모델 번호 | SUPTLB001 |
| 색상 | 검은색 |
| 연결 기술 | Infrared (IR) Learning Function |
| 호환 장치 | Television, other IR-controlled devices |
| 지원되는 최대 기기 수 | 2 |
| 버튼의 수 | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| 배터리 유형 | 2 x AAA (not rechargeable) |
| 최대 범위 | 10미터(약 33피트) |
| 크기(대략) | 16.5cm(길이) x 4.5cm(폭) |
이미지: 측면 view of the remote control with approximate dimensions.
8. 보증 및 지원
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2년 구매일로부터.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics web사이트. 보증 확인을 위해 구매 증빙 자료를 보관하세요.
