1. 서론
This manual provides essential information for the installation, operation, and maintenance of your YuanLey 8 Port 10/100Mbps PoE Switch (Model YS2082F-P). This unmanaged Ethernet switch is designed to provide Power over Ethernet (PoE) to compatible devices, simplifying network infrastructure by delivering both data and power over a single Ethernet cable. Please read this manual thoroughly before using the device to ensure proper and safe operation.
2. 안전 정보
- 전원 공급 장치 볼륨을 확인하십시오.tage는 기기 라벨에 명시된 요구 사항을 충족합니다.
- 장치를 열지 마십시오.asing. 내부에는 사용자가 수리할 수 있는 부품이 없습니다.
- Avoid placing the switch in areas with high humidity, extreme temperatures, or direct sunlight.
- 과열을 방지하기 위해 스위치 주변에 적절한 환기를 확보하세요.
- 기기와 함께 제공된 전원 어댑터만 사용하세요.
- Do not connect non-PoE devices to PoE ports if they are not designed to handle PoE input, as this may cause damage. This switch is designed to detect PoE devices, but caution is always advised.
3. 패키지 내용
Upon opening the package, please verify that all items are present and undamaged. If any items are missing or damaged, contact your vendor immediately.
- YuanLey 8 Port 10/100Mbps PoE Switch (Model YS2082F-P)
- 전원 어댑터
- 사용 설명서 (본 문서)
- Mounting Accessories (if applicable, e.g., rubber feet, wall-mount kit)
4. 제품 오버view
The YuanLey YS2082F-P is an unmanaged 8-port Power over Ethernet (PoE) switch with 2 dedicated uplink ports. It is designed for small to medium-sized networks requiring reliable power and data transmission to PoE-compatible devices such as IP cameras, VoIP phones, and wireless access points.
이미지에 대한 참고사항: The provided product data did not include specific images for the YS2082F-P model. Therefore, visual representations are omitted from this manual. Please refer to the physical product for exact port layouts and indicator locations.
4.1 전면 패널 레이아웃
The front panel of the switch features the Ethernet ports and LED indicators. A general description is given below.
- PoE Ports (Ports 1-8): These 10/100Mbps RJ45 ports support IEEE 802.3af/at Power over Ethernet, providing both data and power to connected PoE devices.
- Uplink Ports (Ports 9-10): These 10/100Mbps RJ45 ports are used to connect the switch to a router, NVR, or another network switch. They do not provide PoE.
- LED 표시등:
- 전원 LED: Indicates power status. (On: Power is supplied; Off: No power).
- 링크/동작 LED(포트당): Indicates connection status and activity. (On: Link established; Blinking: Data activity; Off: No link).
- PoE 최대 LED: Indicates if the total PoE power budget is nearing its limit. (On: PoE power consumption is high; Off: Normal operation).
4.2 후면 패널 레이아웃
The rear panel typically contains the power input and possibly grounding points. A general description is given below.
- 전원 입력: 외부 전원 어댑터용 커넥터입니다.
- 접지 나사: (Optional) For connecting a grounding wire to protect against electrical surges.
5. 설정
5.1 물리적 설치
- 놓기: Place the switch on a stable, flat surface or mount it to a wall using appropriate mounting hardware (if included). Ensure the location is well-ventilated and away from heat sources, moisture, and direct sunlight.
- 전원 연결: Connect the provided power adapter to the switch's power input port, then plug the adapter into a standard AC power outlet. The PWR LED should illuminate.
5.2 네트워크 장치 연결
- 네트워크에 연결: Use a standard Ethernet cable to connect one of the uplink ports (Ports 9 or 10) to your router, modem, or main network switch. The corresponding Link/Act LED should light up.
- PoE 장치 연결: Connect your PoE-compatible devices (e.g., IP cameras, VoIP phones) to any of the PoE ports (Ports 1-8) using standard Ethernet cables. The switch will automatically detect if the connected device is PoE-compatible and supply power. The corresponding Link/Act LED and PoE LED (if available per port) should light up.
- PoE를 지원하지 않는 장치 연결: You can also connect non-PoE network devices (e.g., computers, NVRs without PoE input) to the PoE ports. The switch will provide data connectivity without supplying power.
메모: This is an unmanaged switch, meaning no configuration is required. It operates as plug-and-play.
6. 사용 설명서
The YuanLey YS2082F-P is an unmanaged switch, designed for ease of use. Once connected as described in the Setup section, it will automatically begin functioning.
6.1 전원 켜기
After connecting the power adapter, the switch will power on automatically. The PWR LED will illuminate, indicating that the device is receiving power.
6.2 LED 표시등
Monitor the LED indicators to understand the status of your network connections:
- 전원 LED: 녹색 불이 켜지면 스위치에 전원이 켜져 있음을 나타냅니다.
- 링크/동작 LED:
- Solid green: A stable network link is established on that port.
- Blinking green: Data is being transmitted or received through that port.
- Off: No device is connected, or the connected device is not powered on/not functioning correctly.
- PoE 최대 LED: This LED indicates the overall PoE power consumption. If it lights up, it suggests that the total power drawn by connected PoE devices is approaching the switch's maximum power budget (120W). Consider reducing the number of high-power PoE devices or using a switch with a higher power budget if this LED remains on consistently.
6.3 Unmanaged Operation
As an unmanaged switch, the YS2082F-P requires no software configuration. It automatically handles network traffic, including auto-negotiation for speed and duplex mode, and auto MDI/MDIX for cable type detection. Simply plug in your devices, and the switch will manage the connections.
7. 유지관리
- 청소: 부드럽고 마른 천으로 스위치 외부를 닦으세요. 액체나 에어로졸 세척제는 사용하지 마세요.
- 통풍: 과열을 방지하려면 환기구가 막히지 않았는지 확인하세요.
- 펌웨어: 관리되지 않는 스위치이므로 일반적으로 펌웨어 업데이트는 필요하지 않으며 사용자가 설치할 수도 없습니다.
- 환경 조건: Operate the switch within its specified temperature and humidity ranges to ensure optimal performance and longevity.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원 없음 (전원 LED 꺼짐) | 전원 어댑터가 연결되지 않았거나 결함이 있습니다. 전원 콘센트가 작동하지 않습니다. | Check power adapter connection. Try a different power outlet. Ensure the power adapter is the correct one for the switch. |
| No Link (Link/Act LED Off) | 이더넷 케이블에 오류가 있거나 연결이 끊어졌습니다. 연결된 장치가 꺼져 있거나 오류가 있습니다. | Check cable connections. Try a different Ethernet cable. Ensure the connected device is powered on and functioning. |
| PoE 장치가 전원을 수신하지 못함 | Device is not PoE-compatible; cable issue; total PoE budget exceeded. | Verify the device is IEEE 802.3af/at compliant. Check the Ethernet cable. Monitor the PoE Max LED; if lit, reduce PoE load or use a higher-capacity switch. |
| 느린 네트워크 속도 | 케이블 품질, 네트워크 혼잡, 장치 제한. | Ensure you are using Cat5e or Cat6 cables. Check for other network activity. Verify connected devices support the desired speed. |
9. 사양
| 특징 | 설명 |
|---|---|
| 상표 | 위안레이 |
| 모델 번호 | YS2082F-P |
| 포트 수 | 10 (8 PoE ports, 2 Uplink ports) |
| PoE 표준 | IEEE 802.3af / at |
| 최대 전력 출력 | 120 와트 |
| 데이터 전송 속도 | 10/100 메가비트/초(Mbps) |
| 업링크 포트 속도 | 10/100 메가비트/초(Mbps) |
| 인터페이스 | RJ45 |
| 권tage | 52볼트 (전원 어댑터 입력) |
| 케이스 소재 | 금속 |
| 스위치 유형 | 관리되지 않음 |
| 호환 장치 | Cameras, VoIP phones, Wireless Access Points, etc. |
| 한국어: | 709046763848 |
10. 보증 및 지원
YuanLey products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official YuanLey website. For technical support, troubleshooting assistance, or to report issues, please contact YuanLey customer service through the contact information provided on their official web사이트 또는 구매 플랫폼.
온라인 리소스: 추가 정보, FAQ 및 지원은 다음 웹사이트를 방문하세요. YuanLey Brand Store.
