1. 제품 오버view
The MOOER Audiofile is a professional headphone amplifier pedal designed for use with guitar and bass pedalboards. It utilizes an analog Class A amplification circuit to ensure instrument and effects maintain purity, warmth, and a high level of dynamics. This compact unit also functions as a signal boost or buffer when not used for headphone amp합리화.
2. 주요 특징
- Professional headphone amplifier with analog Class A amp합리화 회로.
- Stereo and Mono inputs, with stereo and mixed mono outputs.
- Optional built-in analog speaker cabinet simulation.
- Functions as a signal boost/buffer.
- True bypass for signal integrity when disengaged.
3. 패키지 내용
- 무어 오디오file 헤드폰 Amp리퍼 페달
- 사용 설명서
Note: A 9V DC power adapter (center negative) is required and sold separately.
4. 제어 및 연결
This image displays the MOOER Audiofile pedal from a top-down perspective, highlighting the Master volume knob, Input jack, Power switch, Bypass switch, Cab Sim switch, Stereo output, Mix Mono output, and DC 9V input.
- DC 9V 입력: 9V DC 전원 어댑터(중앙 음극)를 연결하십시오.
- 마스터 노브: 전체 출력 볼륨을 조절합니다.
- 입력 잭 : Connect your guitar or the output of your pedalboard here.
- 전원 스위치: Toggles the pedal's power on or off.
- 바이패스 스위치: Engages or disengages the pedal's effect. When bypassed, the signal passes through unaffected (true bypass).
- Cab Sim Switch: Activates or deactivates the built-in analog speaker cabinet simulation.
- Stereo Output Jack: Connect stereo headphones for monitoring.
- Mix Mono Output Jack: 에 연결 amplifier or other mono audio device.
5. 설정 지침
5.1 전원 연결
- Ensure the pedal's Power switch is in the 'OFF' position.
- Connect a 9V DC (center negative) power adapter to the DC 9V input jack.
- 전원 어댑터를 적절한 전원 콘센트에 꽂습니다.
5.2 오디오 연결
A diagram demonstrating how to connect the Audiofile pedal to headphones for silent practice or to an amplifier for use as a signal boost or buffer.
- Connect your guitar or the output of your pedalboard to the 'Input' jack of the Audiofile 페달.
- For headphone monitoring, connect your stereo headphones to the 'Stereo' output jack.
- To use the pedal as a signal boost or buffer into an amplifier, connect the 'Mix Mono' output jack to your amplifier의 입력.
6. 사용 설명서
6.1 전원 켜기/끄기
- To power on, flip the 'Power' switch to the 'ON' position. The LED indicator will illuminate.
- To power off, flip the 'Power' switch to the 'OFF' position.
6.2 볼륨 조절
- Rotate the 'Master' knob clockwise to increase the output volume and counter-clockwise to decrease it.
6.3 바이패스 모드 사용
- Flip the 'Bypass' switch to 'ON' to engage the pedal's active circuit.
- Flip the 'Bypass' switch to 'OFF' for true bypass, allowing your signal to pass through without processing.
6.4 Engaging Cabinet Simulation
- Flip the 'Cab Sim' switch to 'ON' to activate the analog speaker cabinet simulation, which is particularly useful for headphone monitoring.
- Flip the 'Cab Sim' switch to 'OFF' to bypass the cabinet simulation.
6.5 Using as a Buffer/Clean Boost
The MOOER Audiofile pedal is shown in a setup, emphasizing its function as a buffer or clean boost for your signal chain.
- When not used for headphone amplification, the Audiofile can be placed at the end of your pedal chain and connected to an amplifier via the 'Mix Mono' output.
- With the 'Bypass' switch 'ON', it acts as a clean boost, enhancing your signal.
- It also functions as a buffer, reducing signal loss over long cable runs or through multiple pedals.
7. 유지관리
- 페달을 깨끗하고 부드럽게 유지하려면 부드럽고 마른 천으로 닦아주세요.
- 페달을 극한의 온도, 습도 또는 직사광선에 노출시키지 마십시오.
- 페달을 분해하거나 개조하지 마십시오. 그렇게 하면 보증이 무효화되고 손상이 발생할 수 있습니다.
- Always disconnect power when not in use or during cleaning.
8. 문제 해결
8.1 사운드 출력 없음
- Check if the power adapter is correctly connected and the pedal is powered on.
- Ensure all audio cables are securely connected to the correct input and output jacks.
- Verify that the 'Master' volume knob is turned up.
- Test with different cables, headphones, or instruments to isolate the issue.
8.2 왜곡되거나 원치 않는 노이즈
- Ensure you are using a regulated 9V DC (center negative) power supply. Incorrect power can cause noise.
- 케이블 연결 상태를 점검하여 느슨하거나 손상된 케이블이 있는지 확인하십시오.
- Adjust the 'Master' volume to an appropriate level; excessively high volume can cause distortion.
- If using other pedals, try connecting the Audiofile directly to your instrument and headphones to determine if another pedal is causing the noise.
9. 사양
| 품목 무게 | 5.6온스(159그램) |
| 제품 치수 | 0.39 x 0.39 x 0.39 인치 |
| 품목 모델 번호 | ME MHA 1 |
| 본체 소재 | 베이스 우드 |
| 호환 장치 | 기타 |
| 커넥터 유형 | 6.35mm Jack (1/4-inch Audio) |
| 신호 형식 | 비슷한 물건 |
| 전원 | AC adapter (9 Volts DC, center negative) |
10. 보증 및 지원
MOOER products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official MOOER website. For technical support or service inquiries, please contact your local dealer or MOOER customer service.
