1. 서론
This manual provides essential instructions for the proper installation, operation, and maintenance of your Alpine HCE-C1100 HDR Rear-View Camera. Please read this manual thoroughly before using the product to ensure correct usage and to prevent damage.
The Alpine HCE-C1100 is designed to enhance vehicle safety by providing a clear rear-view image. It features High Dynamic Range (HDR) technology for improved visibility in varying light conditions and offers multiple view각도를 나타냅니다.
2. 안전 정보
경고: 이 안전 지침을 따르지 않을 경우 화재, 감전 또는 기타 부상이나 손해가 발생할 수 있습니다.
- Always consult a professional for installation if you are not experienced with automotive electrical systems. Incorrect installation can damage the vehicle's electrical system or the camera.
- 카메라를 분해하거나 개조하지 마십시오. 손상이 발생할 수 있으며 보증이 무효화될 수 있습니다.
- Ensure all wiring is properly routed and secured to prevent interference with vehicle operation or damage from moving parts.
- This product is intended as an aid to safe driving and does not replace the need for careful observation and judgment by the driver. Always check your surroundings directly before maneuvering your vehicle.
- The camera is designed with IP68 water resistance. However, avoid directing high-pressure water jets directly at the camera, such as during a car wash, as this may compromise the seal over time.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Alpine HCE-C1100 HDR 후면-View 카메라 유닛
- Installation Cables (Power, Video)
- Mounting Hardware (Screws, Brackets)
- 사용 설명서(본 문서)
이미지 1: 앞면 view of the Alpine HCE-C1100 HDR Rear-View Camera. This image shows the compact design and the camera lens.
4. 설정 및 설치
올바른 설치는 최적의 성능을 위해 매우 중요합니다. 자격을 갖춘 전문가에게 설치를 의뢰하는 것이 좋습니다.
4.1 설치 위치
Select a mounting location that provides a clear, unobstructed view of the rear of the vehicle. Common locations include above the license plate, on the rear bumper, or integrated into a vehicle-specific mount (sold separately).
4.2 배선 연결
- 전원 연결: Connect the camera's power wire to a 6.0V DC power source that is activated when the vehicle is in reverse. Ensure the ground wire is securely connected to the vehicle's chassis (negative ground type). The camera operates at 6.0V DC.
- 비디오 연결: Connect the RCA video output cable from the camera to the video input of your compatible monitor or head unit. The camera outputs a CVBS (NTSC Video Signal) mirror image.
- 케이블 라우팅: Carefully route all cables to avoid pinching, abrasion, or interference with vehicle components. Use cable ties to secure wiring.
Image 2: Alpine HCE-C1100 HDR Rear-View Camera with its attached cable. This image illustrates the camera's compact size and the integrated wiring for connection.
4.3 초기 테스트
After installation, engage reverse gear (with the parking brake applied) to verify the camera image appears on your monitor. Adjust the camera angle if necessary to achieve the desired view.
5. 사용 설명서
The Alpine HCE-C1100 camera automatically activates when the vehicle is shifted into reverse, displaying the rear view 연결된 모니터에서.
5.1 HDR(고화질 동적 범위)
The camera utilizes HDR technology to provide a clear image even in challenging lighting conditions, such as direct sunlight or deep shadows. This feature automatically adjusts exposure and white balance to prevent overly bright or dark areas in the image.
5.2 와이드 View잉 각도
The HCE-C1100 offers a wide viewing angle of approximately 131° horizontally and 125° vertically. This broad perspective helps in identifying obstacles and surroundings that might not be visible in standard mirrors.
5.3 Image Output
The camera outputs a mirror image, which is standard for rear-view applications to simulate a conventional rear-view mirror experience. The image is displayed in a 16:9 wide-screen format on compatible monitors.
6. 유지관리
To ensure the longevity and optimal performance of your Alpine HCE-C1100 camera, follow these maintenance guidelines:
- 렌즈 청소: 카메라 렌즈는 주기적으로 부드러운 천으로 닦아주세요.amp 천을 사용하십시오. 렌즈에 흠집을 낼 수 있는 연마성 세척제나 재질은 사용하지 마십시오.
- 방수 기능: The camera has an IP68 water resistance rating, meaning it is protected against dust ingress and immersion in water up to 1 meter for 30 minutes. While it is designed to withstand typical weather conditions, avoid prolonged submersion or direct high-pressure water spray, which can degrade the seal over time.
- 케이블 검사: Regularly inspect the cables for any signs of wear, fraying, or damage. Ensure all connections remain secure.
7. 문제 해결
If you encounter issues with your Alpine HCE-C1100 camera, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 모니터에 이미지가 나오지 않습니다. |
|
|
| 이미지가 흐릿하거나 왜곡되었습니다. |
|
|
| 이미지가 너무 어둡거나 너무 밝습니다. |
|
|
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | HCE-C1100 |
| 전력 요구 사항 | 6.0V 직류 |
| 지상 유형 | 부정적인 땅 |
| 최대 전력 소비량 | 1.2W @ 6V |
| 출력 이미지 | Mirror Image, CVBS (NTSC Video Signal) |
| 이미지 출력 임피던스 | 75 Ohms (1Vp-p) |
| 이미지 센서 | 1/4 Inch CMOS Image Sensor, 4:3 Aspect Ratio |
| Effective Number Of Pixels | 1280 x 960 (1.2 메가픽셀) |
| 렌즈 초점 거리 | 화이버=1.27mm |
| 렌즈 밝기 | 여=1.8 |
| Angle Of Field (Horizontal) | 약 131° |
| Angle Of Field (Vertical) | 약 125° |
| 자동 이미지 조정 기능 | Automatic Exposure Adjustment, Automatic White Balance Adjustment |
| 동기화 시스템 | 내부 동기화 |
| 휘도 S/N | 8.41 럭스 |
| 해상도 (수평) | 330 TV Lines or More |
| 조명 범위 | Approximately 1.5lx to 100klx |
| 작동 온도 범위 | -22°F ~ 158°F(-30°C ~ 70°C) |
| 방수성 | IP68 |
| 제품 치수 | 1.18 x 1.18 x 1.18인치 (카메라 본체) |
| 품목 무게 | 1 파운드 |
| 커넥터 유형 | (주)알에이씨에이 |
9. 보증 및 지원
For warranty information and customer support, please refer to the official Alpine website or contact your authorized Alpine dealer. Keep your purchase receipt as proof of purchase for warranty claims.
알파인 고객 지원:
- 알파인 공식 웹사이트를 방문하세요. webFAQ, 지원 문서, 연락처 정보는 사이트에서 확인하세요.
- Contact your local Alpine service center for technical assistance or repair services.
