1. 서론
This manual provides essential instructions for the proper setup, operation, and maintenance of your Brecknell LPS150 Portable Shipping Scale. Please read this manual thoroughly before using the scale to ensure safe and efficient operation. The LPS150 is designed for shipping, warehouse, and general-purpose weighing applications, offering portability and ease of use.
2. 안전 정보
- 저울의 최대 용량인 150파운드(68kg)를 초과하여 과부하를 주지 마십시오.
- Avoid dropping the scale or subjecting it to severe shocks.
- 저울이나 그 구성품을 물이나 다른 액체에 담그지 마십시오.
- 제공된 AC 어댑터 또는 지정된 배터리만 사용하십시오.
- 저울을 강한 전자기장 근처에 두지 마세요.
- 저울을 사용할 때는 안정적이고 평평한 표면에 놓아야 합니다.
3. 상자 안에 무엇이 들어있나요?
모든 구성품을 조심스럽게 꺼내어 다음 항목들이 모두 들어 있는지 확인하십시오.
- Weighing Platform with Indicator and Bracket
- AC 전원 어댑터
- AAA 배터리 4개
- RS-232 케이블
- 사용 설명서 (본 문서)
Image 3.1: All components included with the Brecknell LPS150 Portable Shipping Scale.
4. 제품 오버view
4.1개의 구성요소
The Brecknell LPS150 scale consists of a stainless steel weighing platform and a remote LCD indicator connected by a coiled cable. The indicator features a digital display and control buttons.
Image 4.1: Labeled diagram of the LPS150 scale components.
4.2 디스플레이 및 제어
The indicator features a 0.63-inch, 5-digit LCD display. The operator keys include:
- ON / OFF / ZERO: Powers the scale on or off, and zeros the display.
- 단위: Changes the weighing unit (lb, kg, lb/oz).
- 살갈퀴: Subtracts the weight of a container.
- HOLD / PRINT: Holds the displayed weight or sends data via RS-232.
5. 설정
5.1 배치
Place the weighing platform on a firm, level, and stable surface. Ensure there are no obstructions around the platform that could interfere with accurate weighing. The indicator can be placed on a desk or mounted to a wall using the included bracket.
이미지 5.1: Example of scale placement with wall-mounted indicator.
5.2 전원 연결
The LPS150 scale can be powered by either the included AC adapter or four AAA batteries.
- AC 어댑터: Connect the AC adapter to the power input port on the indicator and plug it into a standard electrical outlet.
- 배터리: Open the battery compartment on the back of the indicator and insert four AAA batteries, observing correct polarity.
5.3 Connecting the Indicator to the Platform
Connect the coiled cable from the weighing platform to the corresponding port on the indicator. Ensure the connection is secure.
6. 사용 설명서
6.1 기본 계량
- 를 누르세요 ON / OFF / ZERO button to power on the scale. The display will show "0.00" when ready.
- Place the item to be weighed gently on the center of the weighing platform.
- LCD 화면에 표시된 무게를 읽으세요.
- Remove the item from the platform. The display should return to zero. If not, press ON / OFF / ZERO to re-zero.
Image 6.1: The LPS150 scale ready for weighing.
Image 6.2: Weighing a package on the LPS150 scale.
6.2 단위 환산
무게 단위를 변경하려면:
- With the scale on and displaying weight, press the 단위 단추.
- The display will cycle through available units: pounds (lb), kilograms (kg), and pounds/ounces (lb/oz).
- Release the button when the desired unit is shown.
6.3 용기 기능
용기 무게 제외 기능을 사용하면 용기의 무게를 빼고 내용물의 순중량만 표시할 수 있습니다.
- 저울대 위에 빈 용기를 올려놓습니다.
- 무게가 안정될 때까지 기다리세요.
- 를 누르세요 살갈퀴 button. The display will return to "0.00" and the TARE indicator will illuminate.
- Add items to the container. The display will show only the weight of the added items.
- 무게 제한을 해제하려면 용기를 플랫폼에서 제거하고 버튼을 누르십시오. 살갈퀴 버튼을 다시 누르세요.
6.4 홀드 기능
The Hold function allows you to temporarily freeze the displayed weight, which is useful for weighing large or awkwardly shaped items that might obscure the display.
- 플랫폼 위에 물건을 올려놓으세요.
- Once the weight is stable, press the HOLD / PRINT button. The displayed weight will be held, and the HOLD indicator will illuminate.
- To release the held weight, press the HOLD / PRINT 버튼을 다시 누르세요.
6.5 RS-232 Communication Setup (for UPS Worldship)
The LPS150 scale includes an RS-232 port for data communication with compatible software, such as UPS Worldship. Correct configuration of both the scale and your computer's serial port is crucial for proper functionality.
6.5.1 스케일 구성
- Ensure the scale is powered off.
- 를 누르고 계세요 ON / OFF / ZERO 버튼과 단위 button simultaneously until the display shows "P1". This enters the setup menu.
- 를 누르세요 살갈퀴 button repeatedly to cycle through the programming parameters (P1, P2, P3, etc.) until you reach P4.
- At P4, press the 단위 button to change the setting to 7 (NCI protocol).
- 를 누르세요 살갈퀴 button to save the P4 setting and advance to P5.
- At P5, press the 단위 button to change the setting to 2 (4800 baud rate).
- 를 누르세요 살갈퀴 button to save the P5 setting and advance to P6.
- At P6, press the 단위 button to change the setting to 2 (7E1 data format).
- 를 누르세요 ON / OFF / ZERO button to save all settings and exit the setup menu.
6.5.2 Computer Serial Port Configuration (Windows PC)
- Connect the RS-232 cable from the scale indicator to an available serial port on your computer. If your computer does not have a serial port, a USB-to-serial adapter may be required.
- Open Device Manager (search for "Device Manager" in the Windows search bar).
- Expand the "Ports (COM & LPT)" section.
- Identify the COM port assigned to your scale (e.g., COM1, COM3). Double-click on it to open its Properties.
- Go to the "Port Settings" tab and configure as follows:
- 초당 비트: 4800
- 데이터 비트: 7
- 둥가: 심지어
- 정지 비트: 1
- 흐름 제어: 없음
- Click "OK" to save the settings and close Device Manager.
6.5.3 UPS Worldship Configuration
- Open UPS Worldship software.
- Navigate to the "Tools" tab.
- Select "System Preferences" and then click on "Hardware".
- Under the Scale settings, change the "Scale port" to the COM port you identified in Device Manager (e.g., COM1).
- Change the "Scale Type" to "NCI 3835".
- Click "Test Scale" to verify communication. The weight from the scale should now be reported in Worldship.
7. 유지관리
7.1 청소
To maintain accuracy and prolong the life of your scale:
- Wipe the platform and indicator with a soft, damp 옷감.
- 연마성 세척제, 용제 또는 강한 화학 물질을 사용하지 마십시오.
- Ensure no liquids enter the indicator or the gaps around the platform.
7.2 배터리 교체
If the scale is powered by batteries and the display becomes dim or erratic, it's time to replace the batteries. Open the battery compartment on the back of the indicator, remove the old batteries, and insert four new AAA batteries, ensuring correct polarity.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 저울이 켜지지 않습니다. | No power (AC adapter unplugged, batteries dead/incorrectly installed). | AC 어댑터 연결 상태를 확인하십시오. 배터리를 교체할 때는 극성을 반드시 확인하십시오. |
| 부정확하거나 불안정한 측정값. | Scale not on a level surface; item touching something else; overload; environmental factors (vibrations, drafts). | Ensure scale is level and stable. Re-zero the scale. Remove any obstructions. Do not exceed capacity. |
| 디스플레이에 "Err" 또는 오류 코드가 표시됩니다. | Overload condition; internal error. | Remove weight from platform. Power cycle the scale. If error persists, contact support. |
| RS-232 communication not working with UPS Worldship. | Incorrect scale settings; incorrect computer serial port settings; incorrect Worldship settings; faulty cable. | Review Section 6.5 for detailed configuration steps for the scale, computer, and UPS Worldship. Ensure RS-232 cable is securely connected and not damaged. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | LPS150 |
| 용량 | 150파운드(68kg) |
| 무게 단위 | lb, kg, lb/oz |
| 표시하다 | 0.63" (16 mm), 5-digit LCD |
| 플랫폼 크기 | 15" L x 12" W (381 mm x 305 mm) |
| 건설 | Stainless Steel Platform, Mild Steel Understructure, Stainless Steel/ABS Indicator |
| 힘 | 4 x AAA Batteries or 6 VDC AC Adapter (both included) |
| 인터페이스 | RS-232 |
| 품목 무게 | 11파운드(5kg) |
| 제품 치수 | 17 x 15 x 2.3 inches (overall) |
10. 보증 및 지원
Brecknell products are manufactured to high standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Brecknell web대지.
For technical assistance, troubleshooting, or spare parts, please contact Brecknell customer support. Have your model number (LPS150) and purchase information ready when contacting support.
Brecknell Contact Information:
Please refer to the official Brecknell web최신 연락처 정보는 웹사이트 또는 제품 포장에서 확인하실 수 있습니다.
