CYCPLUS U10

CYCPLUS USB ANT+ 스틱 동글 어댑터 U1 사용 설명서

모델 : U10

1. 제품 오버view

The CYCPLUS USB ANT+ Stick Dongle Adapter U1 is a wireless receiver designed to bridge the gap between traditional bike trainers and modern cycling software. It receives ANT+ wireless radio signals from various sensors and translates them into a USB protocol, enabling seamless integration with popular training applications. This device is essential for indoor cycling enthusiasts looking to enhance their virtual training experience.

CYCPLUS USB ANT+ Stick Dongle Adapter, front view

그림 1: 앞쪽 view of the CYCPLUS USB ANT+ Stick Dongle Adapter. This compact device features a standard USB-A connector on one end and the ANT+ receiver module on the other, designed for easy plug-and-play functionality with computers.

2. 설정 가이드

Setting up your CYCPLUS USB ANT+ Stick Dongle Adapter is straightforward.

  1. 시스템 호환성: Ensure your computer runs on a compatible operating system. The U1 dongle is designed for use with PC/Laptop running Windows or macOS. Please note: This device is not compatible with Android or iPhone mobile devices.
  2. 동글을 연결하세요: Insert the USB ANT+ stick into an available USB port on your desktop or laptop computer.
  3. 드라이버 설치: In most cases, the required drivers will install automatically upon connecting the device to your computer. If automatic installation does not occur, or if you encounter any driver-related issues, please contact CYCPLUS customer service for assistance.
  4. 최적의 배치: For best performance, position the dongle within 3 meters (approximately 10 feet) of your ANT+ sensors (e.g., bike trainer, heart rate monitor, speed/cadence sensors). The maximum effective range is 5 meters.
CYCPLUS USB ANT+ Stick Dongle Adapter, side view showing USB connector

그림 2: 옆 view of the CYCPLUS USB ANT+ Stick Dongle Adapter, highlighting the USB connector. This view demonstrates its compact design, making it easy to plug into any standard USB port.

3. 사용 설명서

Once the ANT+ dongle is successfully set up, you can begin using it with your preferred cycling applications.

  • 소프트웨어 호환성 : The CYCPLUS U1 dongle is compatible with popular indoor cycling software platforms, including Zwift, TheSufferfest, TrainerRoad, and Rouvy.
  • Sensor Data Collection: The dongle is designed to collect various sensor data via the ANT+ wireless protocol. This includes:
    • Cadence sensors
    • 속도 센서
    • Heart rate monitors
    • 파워 미터
    Ensure your sensors are ANT+ compatible and properly paired within your cycling application.
  • Channel Support: The dongle supports 8 ANT+ channels, allowing it to connect to multiple sensors simultaneously.
  • Using with Cycling Software:
    1. Launch your chosen cycling application (e.g., Zwift).
    2. Navigate to the device pairing or sensor connection section within the application.
    3. The application should detect the ANT+ dongle and then allow you to search for and connect to your ANT+ enabled sensors.
    4. Follow the on-screen prompts within the application to complete the pairing process for each sensor.

4. 유지관리

The CYCPLUS USB ANT+ Stick Dongle Adapter U1 requires minimal maintenance to ensure its longevity and optimal performance.

  • 청소: Gently wipe the exterior of the dongle with a soft, dry cloth to remove dust or debris. Avoid using liquid cleaners or abrasive materials.
  • 저장: When not in use, store the dongle in a dry, cool place, away from direct sunlight and extreme temperatures. Protect the USB connector from damage.
  • 손질: Handle the dongle with care. Avoid dropping it or subjecting it to strong impacts, which could damage internal components.

5. 문제 해결

If you encounter issues with your CYCPLUS USB ANT+ Stick Dongle Adapter, refer to the following common troubleshooting steps:

문제가능한 원인해결책
컴퓨터에서 동글을 인식하지 못합니다.
  • USB 연결이 느슨합니다.
  • 드라이버가 설치되지 않았거나 손상되었습니다.
  • USB 포트에 결함이 있습니다.
  • Ensure the dongle is firmly inserted into the USB port.
  • 컴퓨터의 다른 USB 포트를 사용해 보십시오.
  • Check Device Manager (Windows) or System Information (macOS) for driver status. If needed, contact customer service for driver support.
  • 컴퓨터를 다시 시작하세요.
Sensors not connecting or frequently disconnecting.
  • Dongle too far from sensors.
  • 다른 무선 장치의 간섭.
  • Sensor battery low.
  • Incorrect sensor pairing in software.
  • Software-specific ANT+ protocol issues (e.g., Wahoo Kickr protocol vs. ANT FEC).
  • Move the dongle closer to your sensors (ideally within 3 meters).
  • Minimize other wireless devices (Wi-Fi routers, Bluetooth devices) near the dongle during use.
  • Replace batteries in your ANT+ sensors.
  • Ensure correct sensors are selected and paired within your cycling application.
  • If using a Wahoo trainer, try switching to ANT FEC protocol in your software settings if available.
Dongle not working with Android/iPhone.호환성 문제.The CYCPLUS U1 dongle is designed for Windows and macOS computers only and is not compatible with Android or iPhone devices.

6. 사양

특징세부 사항
상표사이클플러스
모델 번호우10
색상Black (U1 Stick)
재료ABS
치수(길이 x 너비 x 높이)18.5mm X 14.5mm X 6mm (0.72 "X 0.57"X 0.24 ")
품목 무게1.7g (0.06oz) / 0.634 ounces (packaged)
무선 프로토콜2.4Ghz ANT+ wireless communications protocol
범위5 meters (Best performance within 3 meters)
채널 번호8
하드웨어 인터페이스USB
데이터 링크 프로토콜USB
데이터 전송 속도초당 3메가비트
호환되는 운영 체제윈도우, 맥OS
지원 소프트웨어Zwift, TheSufferfest, TrainerRoad, Rouvy

7. 보증 및 지원

CYCPLUS is committed to providing high-quality products and excellent customer service.

  • 보증: All CYCPLUS products, including the USB ANT+ Stick Dongle Adapter U1, come with a two-year warranty and full lifetime service.
  • 고객 지원: If you have any questions, require technical assistance, or encounter any issues not covered in this manual, please do not hesitate to contact CYCPLUS customer service. We are always ready to assist you.

관련 문서 - 우10

사전view Cycplus U10 ANT+ USB 어댑터 사용 설명서 및 사양
Cycplus U10 ANT+ USB 어댑터의 포괄적인 사용 설명서로, 기능, 용도, 안전 지침, 기술 사양, 환경 규정 준수 및 EU 적합성 선언을 다룹니다. 사이클링 트레이너와 기기를 무선으로 연결하는 데 이상적입니다.
사전view CYCPLUS T3 스마트 바이크 트레이너 사용 설명서
CYCPLUS T3 스마트 자전거 트레이너 사용 설명서에는 설정, 설치, 사용 방법 및 사양에 대한 내용이 포함되어 있습니다. 자전거 연결 방법, 작동 모드 이해 및 일반적인 문제 해결 방법을 알아보세요.
사전view CYCPLUS T3 스마트 바이크 트레이너 사용 설명서
CYCPLUS T3 스마트 자전거 트레이너의 설정, 설치, 작동 및 사양을 모두 다루는 종합 사용자 설명서입니다. 자전거 연결 방법, CYCPLUS 앱 사용 방법, 일반적인 문제 해결 방법을 알아보세요.
사전view CYCPLUS T2H 스마트 자전거 트레이너 사용 설명서
CYCPLUS T2H 스마트 자전거 트레이너에 대한 포괄적인 사용자 매뉴얼로, 개봉, 설치, 설정, 작업 모드, 응용 프로그램 사용, 문제 해결 및 사양에 대한 내용을 담고 있습니다.
사전view CYCPLUS T2 스마트 바이크 트레이너 사용 설명서
CYCPLUS T2 스마트 자전거 트레이너의 사용 설명서로, 설정, 설치, 작업 모드, 응용 프로그램 및 사양에 대한 내용을 담고 있습니다.
사전view CYCPLUS R200 스마트 자전거 트레이너 사용 설명서
이 사용 설명서는 CYCPLUS R200 스마트 자전거 트레이너의 개봉, 설치, 설정 및 사양에 대한 지침을 제공합니다. 자전거 연결 방법, 다양한 모드 사용 방법 및 일반적인 문제 해결 방법을 알아보세요.