1. 서론
This manual provides essential information for the safe and effective use of your SHARP KC-H50-W Humidifying Air Purifier. This appliance combines air purification with humidification, utilizing Plasmacluster 7000 technology to improve indoor air quality. Please read this manual thoroughly before operating the unit and retain it for future reference.
2. 안전 정보
안전한 작동을 위해 항상 다음 기본 예방 조치를 따르세요.
- Always connect the unit to a 100V AC power supply. Do not use with other voltag에스.
- 공기 흡입구 또는 배출구를 막지 마십시오.
- 제품을 물이나 습기로부터 멀리하십시오. 젖은 손으로 작동하지 마십시오.
- 제품을 직접 분해, 수리 또는 개조하지 마십시오. 공인 서비스 센터에 문의하십시오.
- Ensure the water tank is filled with clean tap water only. Do not add chemicals or essential oils.
- 청소나 유지관리 작업을 하기 전에는 반드시 장치의 플러그를 뽑으세요.
3. 제품 오버view 및 부품 식별
Familiarize yourself with the main components of your air purifier.
그림 3.1: 전면 view of the SHARP KC-H50-W Humidifying Air Purifier.
주요 구성 요소:
- 제어판: Located on the top, for operating modes and settings.
- 공기 배출구: Top front, releases purified and humidified air.
- 공기 흡입구: Rear panel, draws in room air.
- 수조: Removable tank for humidification.
- 필터: Pre-filter, Deodorizing filter, HEPA filter (located behind the rear panel).
- 센서: Detects odor, humidity, temperature, and light levels.
- Casters with Stopper: For easy movement and stable placement.
Figure 3.2: Dimensions of the SHARP KC-H50-W (Height: 615mm) for scale.
4. 설정
초기 설정을 위해 다음 단계를 따르세요.
- 짐 풀기: 제품을 포장에서 조심스럽게 꺼내십시오. 추후 운송 또는 보관을 위해 포장재를 보관하십시오.
- 필터 설치 : Open the rear panel and ensure all filters (Pre-filter, Deodorizing filter, HEPA filter) are correctly installed and any protective plastic wrapping is removed. Close the panel securely.
- 물 탱크 채우기: Remove the water tank from the side of the unit. Unscrew the cap, fill with clean tap water up to the MAX line, and securely replace the cap. Reinsert the tank into the unit.
- 놓기: Place the unit on a flat, stable surface. Ensure there is adequate space around the unit (at least 20 cm from walls or furniture) for proper airflow. The casters allow for easy positioning.
- 전원 연결: 전원 코드를 표준 100V AC 콘센트에 꽂으세요.
5. 사용 설명서
The control panel allows you to select various operating modes and monitor air quality.
5.1 전원 켜기/끄기
- 를 누르세요 전원 버튼 to turn the unit ON or OFF.
5.2 작동 모드
- 자동 모드 : The unit automatically adjusts fan speed and humidification based on the detected air conditions (odor, humidity, temperature, light).
- 조용한 수면 모드: When ambient light is low (e.g., lights are turned off), the unit automatically switches to a quiet operation. It will also quietly humidify if dryness is detected, ensuring a comfortable environment for sleep.
- 꽃가루 모드: Increases sensor sensitivity to quickly detect pollen and operates at a stronger fan speed to remove it from the air.
5.3 디스플레이 및 표시기
- 디지털 디스플레이: Shows current room temperature, humidity (in 1% increments), and an estimated daily electricity cost (in 1 yen increments).
- Clean Monitor: An indicator light changes color to show the overall air cleanliness status.
- High/Low Temperature & Humidity Monitoring: The unit provides alerts (sound and light) if room temperature or humidity levels become excessively high or low.
6. 유지관리
정기적인 유지관리를 통해 공기청정기의 최적의 성능과 수명을 보장할 수 있습니다.
6.1 Water Tank and Humidifying Tray
- 일일: Refill the water tank with fresh tap water. The tank is designed with a handle for easy carrying and can stand upright during refilling.
- 주간: Clean the water tank and humidifying tray to prevent slime and odor buildup. The integrated Ag+ Ion Cartridge helps suppress these issues, but regular cleaning is still recommended.
6.2 필터
그림 6.1: 3개의tage filter system effectively captures dust, odors, and fine particles.
- 사전 필터: Clean regularly (e.g., every two weeks) by vacuuming or washing with water.
- Deodorizing Filter & HEPA Filter: These filters are not washable. Replace them according to the manufacturer's recommendations or when performance noticeably declines. Refer to the product specifications for filter lifespan.
6.3. 외부 청소
- Wipe the exterior of the unit with a soft, dry cloth. For stubborn dirt, use a damp 천과 중성 세제를 사용하여 닦은 다음 건조시키십시오.
7. 문제 해결
공기 청정기에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치가 켜지지 않습니다 | 전원 코드가 뽑혀 있습니다. 전원이 꺼져 있습니다.tage; 장치 오작동 | Check power cord connection; Check household circuit breaker; Contact customer support |
| 가습 없음 | Water tank empty; Humidifying filter dirty; Humidification function off | Refill water tank; Clean/replace humidifying filter; Activate humidification mode |
| 이상한 냄새 | Filters dirty; Water tank/tray dirty; New unit odor | Clean/replace filters; Clean water tank/tray; Odor should dissipate after initial use |
| Air purification ineffective | Filters dirty or clogged; Unit placed in an unsuitable location | Clean/replace filters; Ensure proper placement with adequate airflow |
위 해결 방법을 시도한 후에도 문제가 지속되면 샤프 고객 지원팀에 문의하십시오.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | KC-H50-W |
| 상표 | 날카로운 |
| 치수(폭 x 깊이 x 높이) | 39.9 x 23 x 61.5cm |
| 무게 | 약 7.7kg |
| 전원 공급 장치 | 100V 교류 |
| 전력 소비량(최대) | 대략. 54W |
| 전원 코드 길이 | 1.8분 |
| 가습 방법 | Evaporation Type |
| Humidification Capacity (Max) | 500 mL / h |
| 물탱크 용량 | 대략. 2.5L |
| Applicable Humidifying Air Purifying Area | Approx. 14m² (~8.5 tatami for wooden rooms) |
| Applicable Humidification Area (Prefab Western Room) | ~14 tatami (23m²) |
| Applicable Humidification Area (Wooden Japanese Room) | ~8.5 tatami (14m²) |
| Air Purification Time (for 8 tatami) | 17 분 |
| Plasmacluster Ion Density | 7000 표준 |
| 센서 | Odor, Humidity, Temperature, Light |
9. 보증 및 지원
Your SHARP KC-H50-W Humidifying Air Purifier comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage.
For technical support, service, or to purchase replacement parts (such as filters or the Ag+ Ion Cartridge), please contact SHARP customer service. Contact information can typically be found on the SHARP official web사이트나 제품 포장에 표시하세요.
