1. 제품 오버view
The Waveshare 7-inch HDMI LCD (H) is a versatile capacitive touch screen monitor featuring a 1024x600 IPS display with a toughened glass cover. Designed for broad compatibility, it supports various single-board computers and systems, offering a responsive and clear visual interface.
주요 특징:
- 7인치 IPS 디스플레이: 다양한 것을 제공합니다 viewing angle and vibrant colors.
- 1024x600 Resolution: Offers clear and crisp visuals.
- 정전식 터치: Supports 5-point touch (driver-free for most supported systems).
- Toughened Glass Cover: Enhances durability and protection.
- 광범위한 호환성: Works with Raspberry Pi (all versions), Jetson Nano, PCs (Windows 10/8.1/8/7), and various game consoles (Xbox360, PS4, Switch).
- 운전자 없는 운행: Plug-and-play functionality for many supported operating systems.
2. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- 1x 7-inch HDMI LCD (H) Monitor
- 2x Brackets (for stand)
- 1x HDMI 케이블
- USB-A-Type-C 케이블 1개
- 1x Mini HDMI to HDMI Adapter
- 2x 긴 나사
- 4x Copper Screws
- 4x 짧은 나사
- 1x 드라이버
- 1x 사용자 설명서
3. 사양
| 특징 | 사양 |
|---|---|
| 디스플레이 화면 | 7 인치 |
| 패널 유형 | IPS |
| 터치타입 | 5포인트 정전식 터치 |
| 해결 | 1024 x 600 |
| 명도 | 420칸델라/제곱미터 |
| View잉 각도 | 170°(수평) / 170°(수직) |
| 새로 고침 빈도 | 60Hz |
| 인터페이스 | HDMI, Type-C, 3.5mm Audio |
| 입력 Voltage | 5V |
| Total Power (Max) | 2.55와트 |
| 작동 온도 | -20도 ~ 60도 |
| 보관 온도 | -30도 ~ 70도 |
| 제품 무게 | 0.9파운드(10.6온스) |
| Screen Dimensions (L×W×D) | 165x102x15mm (6.5x4.0x0.6 in) |
| Display Area (L×W) | 154x86mm |
| 지원 시스템 | Windows 11/10/8.1/8/7, Raspbian, Ubuntu, Kodi |
4. 설정 및 설치
4.1 스탠드 부착
- Carefully remove the protective film from the included stand brackets.
- Align the brackets with the screw holes on the back of the monitor.
- Secure the brackets using the provided long screws and screwdriver. Do not overtighten.
4.2 Raspberry Pi Connection Setup
To ensure proper functionality with Raspberry Pi, specific configuration changes are required:
- Insert your Raspberry Pi's SD card into a computer.
- 열기
config.txtfile located in the root directory of the SD card. - Add the following lines at the end of the file:
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=7
hdmi_group=2
hdmi_mode=87
hdmi_drive=1
display_rotate=0
hdmi_cvt 1024 600 60 6 0 0 0If you are using the official Raspberry Pi OS (2021-10-30), change:
dtoverlay=vc4-kms-v3d
to:
#dtoverlay=vc4-kms-v3d- Save the changes and safely eject the SD card.
- Insert the SD card back into your Raspberry Pi.
- Connect the HDMI and TOUCH interfaces of the monitor to the Raspberry Pi's card.
- Power up the Raspberry Pi, and the display and touch functionality should work properly.
4.3 PC Connection Setup
For PC connection, set the resolution according to the instructions in the manual. If using dual monitors, configure the primary and secondary screens, and adjust the resolution for each monitor accordingly.
5. 모니터 작동하기
5.1 온스크린 디스플레이(OSD) 메뉴
The monitor features tactile buttons on the back for navigating the OSD menu. These buttons allow you to adjust various display settings.
- 메뉴: Press to open the main menu, then press again to enter a sub-menu.
- Left/Up: Navigate left/up in the menu, or decrease values.
- Right/Down: Navigate right/down in the menu, or increase values.
- 반품: Exit the current menu or return to the previous menu.
- 힘: 디스플레이를 켜거나 끕니다.
5.2 터치 컨트롤
The capacitive touch screen supports up to 5-points touch, depending on the operating system. This allows for intuitive interaction with compatible devices.
6. 유지관리
모니터의 수명과 최적의 성능을 보장하려면 다음 유지 관리 지침을 따르세요.
- 청소: Use a soft, dry cloth to clean the external housing. For the screen, use a soft cloth slightly damp물이나 마모성이 없는 화면 세척제로 닦으십시오. 강한 화학 약품은 사용하지 마십시오.
- 손질: Avoid dropping the monitor or subjecting it to strong impacts. Do not place heavy objects on the screen.
- 환경: Keep the monitor in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture.
7. 문제 해결
- Monitor is not powering on: Ensure the power cable is properly plugged into the Raspberry Pi and the included USB-A to C cable is securely connected between the board and the display.
- Image is reversed: The monitor does not support image flip.
- Touch functionality not working: Make sure the USB-A to C cable is connected between the Raspberry Pi board and the display, directly from the display to the power socket.
- No signal on display: Ensure the HDMI cable is properly connected between the Raspberry Pi board and the display. If using a mini HDMI port, make sure to use the included mini HDMI to HDMI adapter.
- 지원되는 운영 체제: Windows 11/10/8.1/7, Raspbian, Ubuntu, Kodi.
- Using with PS3/PS4/Xbox One/Xbox 360: Yes, please use the HDMI port.
- Power source shut off, monitor not turning back on: If the monitor will come back on, or do you have to press the button.
- 소리가 나지 않습니다: This monitor has no built-in speakers. For sound output, connect external speakers via the 3.5mm audio jack.
8. 보증 및 지원
The product comes with a 12-month warranty for quality-related issues. You can return any undamaged product within 12 months for a refund or replacement. Shipping costs and import duties/taxes are not included in the refund/replacement process.
연락처 정보:
- Web대지: www.eyyoyousa.com
- 이메일: support@eyoyomonitor.com
- 전화: 909-317-8588 (9:00AM-5:00PM; Monday-Friday)
- USA Office Address: 10700 Jersey Blvd Ste 640, Rancho Cucamonga, CA 91730, USA
9. 미디어 갤러리
제품 이미지
