소개
Thank you for choosing the Spanninga Kendo+ XE LED Headlight. This manual provides essential information for the proper installation, operation, and maintenance of your new headlight. Please read this manual thoroughly before using the product to ensure safe and efficient performance. This headlight is designed for bicycles and offers reliable illumination with its 30 lux LED output and robust construction.
The Kendo+ XE features a durable plastic housing, a powerful LED, and comes with an HB06 V-brake holder for easy mounting. It is water-resistant with an IPX6 rating, making it suitable for various weather conditions.
안전 정보
부상이나 제품 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.
- 전조등이 켜져 있을 때 빛줄기를 직접 쳐다보지 마십시오. 일시적인 시력 저하를 유발할 수 있습니다.
- Ensure the headlight is securely mounted before each ride to prevent it from falling off.
- Keep the headlight clean and free from obstructions to maintain optimal light output.
- Do not attempt to disassemble or modify the headlight. This may void the warranty and could lead to malfunction or injury.
- This product is water-resistant (IPX6), but it is not designed for submersion. Avoid prolonged exposure to heavy rain or direct water jets.
- Ensure the power source (6-36 V DC) is compatible with the headlight's requirements. Incorrect voltag장치가 손상될 수 있습니다.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Spanninga Kendo+ XE LED Headlight
- HB06 V-brake holder
- 690 mm connection cable
설정 및 설치
Follow these steps to properly install your Spanninga Kendo+ XE LED Headlight:
- 구성 요소 식별: Familiarize yourself with the headlight unit and the HB06 V-brake holder. The headlight has a clear lens at the front and a mounting point at the bottom. The holder is designed to attach to your bicycle's V-brake mount.
- Attach Holder to Bicycle: Secure the HB06 V-brake holder to the designated mounting point on your bicycle's front fork or V-brake bolt. Ensure it is firmly tightened to prevent movement during rides.
- Mount Headlight to Holder: Align the headlight with the mounting point on the HB06 holder. Use the provided screws or fasteners to securely attach the headlight to the holder. Ensure the headlight is facing forward and is level.
- 전원 케이블 연결: The headlight comes with a 690 mm cable. Connect this cable to your bicycle's dynamo or compatible 6-36 V DC power source. Ensure the polarity is correct as indicated on the headlight or in your bicycle's wiring diagram. Secure any loose cables to prevent them from interfering with moving parts.
- 빔 각도 조정: Once mounted, adjust the angle of the headlight so that the beam illuminates the road ahead without blinding oncoming traffic or pedestrians. Typically, the beam should be aimed slightly downwards.
그림 1: 전체 view of the Spanninga Kendo+ XE LED Headlight with its integrated mounting bracket.
그림 2: 측면 view illustrating the design of the mounting bracket for attachment to the bicycle.
그림 3: 후면 view of the headlight, highlighting the attachment mechanism to the V-brake holder.
그림 4: 전면 view of the headlight, showing the main LED and integrated reflector for enhanced visibility.
작동 지침
The Spanninga Kendo+ XE LED Headlight is designed for straightforward operation:
- 전원 켜기/끄기: The headlight is typically controlled by your bicycle's dynamo system or an external switch connected to your DC power source. When the power source is active, the headlight will illuminate. There is no separate on/off switch on the headlight unit itself.
- 광 출력: The headlight provides a consistent 30 lux brightness. There is only one setting for light output.
- 반사기: The integrated front reflector enhances your visibility to others, even when the light is not active.
유지
To ensure the longevity and optimal performance of your headlight, follow these maintenance guidelines:
- 청소: 헤드라이트와 렌즈를 부드러운 천으로 닦으세요.amp cloth. Do not use abrasive cleaners or solvents, as they can damage the plastic housing or lens.
- 점검: Regularly check the mounting bracket and screws for tightness. Vibrations from riding can loosen fasteners over time.
- 케이블 무결성: Periodically inspect the power cable for any signs of wear, fraying, or damage. Replace if necessary to prevent electrical issues.
- 저장: If storing your bicycle for an extended period, ensure the headlight is clean and dry. Store in a cool, dry place away from direct sunlight.
문제 해결
If you encounter issues with your Spanninga Kendo+ XE LED Headlight, refer to the table below for common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 헤드라이트가 켜지지 않습니다. | No power from dynamo/power source. 케이블이 헐거워졌거나 연결이 끊어졌습니다. 배선 극성이 올바르지 않습니다. | Check your bicycle's dynamo or power source for proper function. 모든 케이블 연결부가 단단히 고정되어 있고 손상되지 않았는지 확인하십시오. Verify cable polarity according to your bicycle's wiring diagram. |
| 조명 출력이 어둡거나 깜박입니다. | 전력 공급이 부족합니다. 더러운 렌즈. 연결이 느슨함. | Ensure consistent power supply from your dynamo/source. Clean the headlight lens with a soft, damp 옷감. 모든 케이블 연결부가 단단히 고정되었는지 확인하십시오. |
| Headlight is loose or wobbles. | 장착 나사가 느슨합니다. Holder not securely attached to bicycle. | Tighten the screws that attach the headlight to the HB06 holder. Ensure the HB06 holder is securely fastened to your bicycle's V-brake mount. |
If the problem persists after attempting these solutions, please contact Spanninga customer support or your local dealer for assistance.
명세서
Detailed technical specifications for the Spanninga Kendo+ XE LED Headlight:
| 특징 | 사양 |
|---|---|
| 모델명 | Kendo+ Xe |
| 부품 번호 | 79219 |
| 광원 | 1 LED |
| 명도 | 30 럭스 |
| 전원 | 6-36 V DC (Battery Powered) |
| 재료 | 플라스틱 |
| 색상 | 검은색 |
| 장착 유형 | Frame Mount (HB06 V-brake holder included) |
| 방수 레벨 | 방수 (IPX6) |
| 설정 수 | 1 |
| 항목 패키지 치수 | 11.81 x 7.87 x 5.91 인치 |
| 패키지 무게 | 0.3 킬로그램 |
보증 및 지원
Spanninga products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your purchase or visit the official Spanninga web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
For technical support, spare parts, or further inquiries, please contact your local Spanninga dealer or visit the Spanninga official web연락처 정보 사이트.
